Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

PL11-3

Manufacturer

Trompeter Electronics
Manufacturer's Part Number

PL11-3
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: PL11;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Panjit International

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

BAV99

Motorola

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

1N4148WT

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C1206C104M5RACTU

KEMET Corporation

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

OPA2277UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

M39029/56-351

TE Connectivity

TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.

Details

LL4148

First Components International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM317LMX/NOPB

Texas Instruments

LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.

Details

RC0805FR-0710RL

Yageo

Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.

Details

LM555CN

Intersil

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

MMBT2222ALT1G

Onsemi

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

Details

MC7805CTG

Onsemi

MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.

Details

LL4148

Semtech Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

PL11-3 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Mating Contact Finish:	NOT SPECIFIED
Filter Feature:	NO
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	CABLE
MIL Conformity:	NO
Coupling Type:	BAYONET
Termination Type:	CRIMP
Contact Gender:	MALE
Characteristic Impedance:	75 ohm
Connector Type:	RF CONNECTOR
Additional Features:	APPLICABLE CABLES: RG-55; RG-223
Option:	GENERAL PURPOSE
Manufacturer Series:	PL11
Body or Shell Style:	PLUG
DIN Conformance:	NO

Category Top Products

3-1393670-9

TE Connectivity

3-1393670-9 by TE Connectivity is a RF connector with SCREW coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. It is used in commercial applications up to 10 GHz frequency for high durability and low contact resistance. The right angle mounting style with solder termination makes it suitable for panel installation.

5-1814823-1

TE Connectivity

TE Connectivity 5-1814823-1 RF Connector has 5000000000 ohm Insulation Resistance, 0.736" Body Depth, and THREADED Coupling Type. Ideal for commercial applications with 2 GHz Max Operating Frequency, it features POLYPROPYLENE Insulator Material and ZINC ALLOY Shell Material.

1621-60075

Sv Microwave

RF 2.4MM CONNECTOR;

19S104-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S104-40ML5 by Rosenberger Hochfrequenztechnik & Kg is an RF SMP CONNECTOR with a max operating frequency of 26.5 GHz and insertion loss of 0.17 dB. It features a SNAP coupling type, MIL conformity, and liquid crystal polymer insulator material. Ideal for high-frequency applications requiring reliable signal transmission in electronic systems.

CUC-COX-J1M-A/LBS

Phoenix Contact

RF CONNECTOR;

1056550-1

TE Connectivity

TE Connectivity's 1056550-1 RF SMP Connector features an Insulation Resistance of 5G ohm, Insertion Loss of 0.62 dB, and operates up to 26.5 GHz. Ideal for applications requiring a durable, high-frequency RF connector with a characteristic impedance of 50 ohm and a max operating temperature of 165°C.

D4S20L-40MA5-A

Rosenberger Hochfrequenztechnik & Kg

RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

3-1393670-9

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Panel Mount: YES; Filter Feature: NO;

EM30MSD

Hirose Electric

OTHER RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Silver (Ag); JESD-609 Code: e4; Contact Material: NOT SPECIFIED;

18S141-40ML5

Rosenberger Hochfrequenztechnik & Kg

18S141-40ML5 RF SMP connector by Rosenberger features 0.4 dB insertion loss, 50 ohm impedance, and 65 GHz max operating frequency. Ideal for commercial applications, it offers a durable design with POLYTETRAFLUOROETHYLENE insulator material and surface mount termination.

861V509ER6

Winchester Interconnect

861V509ER6 by Winchester Interconnect is a threaded RF connector with a max operating temperature of 65°C and a min operating temperature of -40°C. It has a characteristic impedance of 75 ohm and can handle frequencies up to 3 GHz. This connector is commonly used in applications requiring high-frequency signal transmission, such as telecommunications and wireless communication systems.

MM8030-2610RJ3

Murata Manufacturing

MM8030-2610RJ3 by Murata Manufacturing is a RF connector with a low insertion loss of 0.5 dB and a voltage standing wave ratio of 1.5. It is designed for surface mount termination on boards and can operate at frequencies up to 11 GHz.

R180415007

Radiall S A

R180415007 RF Connector by Radiall S A features a threaded coupling type, 50 ohm impedance, and max operating frequency of 20 GHz. Ideal for panel mounting applications, this connector has a body length of 0.768", insertion loss of 0.22 dB, and can operate in temperatures ranging from -55 to 125°C.

R222508700

Radiall S A

The Radiall S A R222508700 RF SMP Connector features a body diameter of 0.164", insertion loss of 0.12 dB, and gold (Au) termination contact finish. With a max operating frequency of 18 GHz, it is ideal for board mounting in applications requiring a durable, 50 ohm coaxial connection with high insulation resistance and low voltage standing wave ratio.

1214-4001

Sv Microwave

1214-4001 by Sv Microwave is a RF SMP connector with 50 ohm impedance, suitable for applications up to 26.5 GHz. Featuring gold shell finish, PTFE insulator material, and female contact gender, it offers durability of 100 cycles. Ideal for semi-rigid cable mounting in high-frequency environments.

1211-40001

Sv Microwave

The SV Microwave 1211-40001 RF SMP Connector has a characteristic impedance of 50 ohm and can operate up to 26.5 GHz. With a dielectric voltage rating of 700VAC, it is suitable for high-frequency applications. Featuring a gold shell finish and beryllium copper material, this connector is ideal for surface mount board installations.

SF9411-6000

Sv Microwave

OTHER RF CONNECTOR;

TC-400-716FC

Times Microwave Systems

RF 7/16 DIN CONNECTOR;

82_MMBX-50-0-14/111_NE

Huber+suhner Ag

82_MMBX-50-0-14/111_NE by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.

SF4546-6011

Sv Microwave

Other RF Connectors;