Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1214-4001

Manufacturer

Sv Microwave
Manufacturer's Part Number

1214-4001
Description

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Durability: 100 Cycles; Insulation Resistance: 5000000000 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;

Details

1N4148

STMicroelectronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

STM32F407VGT6

STMicroelectronics

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

1N4148

Onsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WT

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

M39029/58-360

Defense Logistics Agency

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

Details

BSS138BK,215

NXP Semiconductors

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

Details

M39029/56-351

Itt Cannon

CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;

Details

350766-1

TE Connectivity

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

Details

STM32F405RGT6TR

STMicroelectronics

STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.

Details

LL4148

Panjit International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

North American Philips Discrete Products Div

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LIS3DHTR

STMicroelectronics

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Nte Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;

Details

LL4148

Excel (Suzhou) Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

New Jersey Semiconductor Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1214-4001 Technical Details

TYPE	DESCRIPTION
Panel Mount:	NO
Sub-Category:	Other RF Connectors
Shell Finish:	GOLD
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	165
Body Length:	.205 inch
Contact Gender:	FEMALE
Body Diameter:	.135 inch
Connector Type:	RF SMP CONNECTOR
Mounting Option-1:	LOCKING
Contact Resistance:	6 mohm
Insulation Resistance:	5000000000 ohm
Mounting Style:	RIGHT ANGLE
No. of Ports:	1
Contact Style:	COAX
Durability:	100 Cycles
Mounting Type:	CABLE
Body Depth:	.275 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Dielectric Withstanding Voltage (V):	700VAC
Coupling Type:	SNAP
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	26.5 GHz
Shell Material:	BERYLLIUM COPPER
Body or Shell Style:	JACK
Cable Types:	SEMI-RIGID

Category Top Products

SMP-MSLD-PCS18T

Amphenol

RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

PL455ACWS-202

Cinch Connectivity Solutions

PL455ACWS-202 by Cinch Connectivity Solutions is a FEMALE CRIMP RF connector with STRAIGHT mounting style for CABLE termination. Featuring 0.002 GHz frequency, it's ideal for commercial applications requiring reliable COAX connections with LOCKING option.

3202-6000

Sv Microwave

3202-6000 RF SMPM Connector by Sv Microwave features a 0.156" body diameter and 0.08" body depth, with a max operating frequency of 40 GHz. It has a characteristic impedance of 50 ohm, suitable for panel mount applications in high-frequency environments. The connector is designed with stainless steel shell material and PTFE insulator for durability and reliable performance.

20549-001E

I-pex

20549-001E by I-pex is a SNAP RF CONNECTOR for BOARD mounting with FEMALE contact gender. It features SURFACE MOUNT termination, suitable for various applications in electronics and telecommunications due to its STRAIGHT mounting style.

19S102-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S102-40ML5 RF SMP connector by Rosenberger features 0.63 dB insertion loss, 1.5 VSWR, and operates up to 40 GHz. With MIL conformity, GOLD finish, and SNAP coupling, it is ideal for high-frequency applications requiring a characteristic impedance of 50 ohm.

U.FL-R-SMT-1(80)

Hirose Electric

U.FL-R-SMT-1(80) by Hirose Electric is a 50 ohm RF connector with liquid crystal polymer insulator, suitable for commercial applications up to 6 GHz. Featuring a dielectric voltage of 200VAC and operating temperature range from -40°C to 90°C, it offers high durability with 30 cycles lifespan. This surface mount connector has a compact design with dimensions of 0.122" x 0.118" x 0.049", making it ideal for board mounting in various electronic devices.

BJ3459ACP-201

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Finish: NICKEL; Contact Style: COAX; No. of Ports: 1;

73415-3591

Molex

The Molex 73415-3591 RF SMP Connector features a body diameter of 0.25", gold termination contact finish, and a max operating frequency of 40 GHz. Ideal for board mounting applications in commercial settings, with durability up to 500 cycles and a characteristic impedance of 50 ohm.

222197

Amphenol

Amphenol 222197 RF connector features gold contact finish, threaded coupling, and PTFE insulator. With a max operating temp of 165°C and min of -65°C, it's ideal for commercial applications up to 2 GHz frequency. This male plug connector has a characteristic impedance of 75 ohm for cable mounting in various RF setups.

CUC-COX-J1M-A/LBS

Phoenix Contact

RF CONNECTOR;

FFA.00.250.CTAC29Z

Lemo Usa

FFA.00.250.CTAC29Z by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.

R222.680.000

Radiall S A

Radiall S A R222.680.000 RF Connector features 0.42 dB Insertion Loss, 1.25 VSWR, and 12 GHz Max Operating Frequency. Ideal for board and panel mounting in applications requiring high-frequency signal transmission with a characteristic impedance of 50 ohm.

902-9235

Amphenol

Amphenol 902-9235 RF Connector features 0.5 dB insertion loss, 1.5 VSWR, and operates up to 11 GHz. With a body size of 2"x1.35"x.9", it is ideal for board mounting in applications requiring high-frequency signal transmission at temperatures ranging from -40°C to 85°C.

1056724-1

TE Connectivity

TE Connectivity's 1056724-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring high-frequency signal transmission in harsh environments.

85-3

Amphenol

The Amphenol 85-3 RF Connector is a panel mount jack with 0.8 dB insertion loss and gold termination. It has a max operating frequency of 11 GHz, ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85°C. The connector features snap coupling, PTFE insulator material, and a characteristic impedance of 50 ohm.

MM8130-2600B

Murata Manufacturing

MM8130-2600B by Murata Manufacturing is a panel mount RF connector with 0.083" body diameter, 500M ohm insulation resistance, and 0.1 dB insertion loss. It operates b/w -40 to 85°C, has a VSWR of 1.2 at 6 GHz, and is ideal for commercial applications requiring a durable female coaxial jack connector.

R222940100W

Radiall S A

R222940100W RF SMP connector by Radiall S A features an insertion loss of 0.12 dB, insulation resistance of 5G ohm, and a max operating frequency of 12.4 GHz. With a durable brass shell and PEEK insulator, it is ideal for high-frequency applications requiring low signal loss and high reliability in commercial settings.

222113

Amphenol

Amphenol 222113 RF Connector: 50 ohm impedance, 1 GHz frequency, TIN LEAD finish. Used in RF applications for cables with PLUG body style and CRIMP termination. Operating temp -40 to 85°C.

BJ76

Bel Fuse

BJ76 RF TRB connector by Bel Fuse features a 0.84" body depth, nickel shell finish, and brass shell material. It is designed for panel mounting with solder termination, suitable for commercial applications up to 0.5 GHz frequency. The jack-style connector offers a straight mounting style with coax contact and locking option.

E.FL-LR-SMT(10)

Hirose Electric

E.FL-LR-SMT(10) by Hirose Electric is a RF UMC/UMCC connector with 50 ohm impedance and 1.3 VSWR, suitable for surface mount applications. Featuring liquid crystal polymer insulator, it operates up to 2 GHz frequency, making it ideal for board mounting in high-frequency electronic devices.