Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SMP-MSLD-PCS-16

Manufacturer

Amphenol
Manufacturer's Part Number

SMP-MSLD-PCS-16
Description

RF SMP CONNECTOR;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Vishay Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Minilogic Device

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;

Details

STM32H753IIK6

STMicroelectronics

STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

LL4148GS08

Temic Semiconductors

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

Details

LM7805CT

Integrated Circuit Technology

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

Details

LL4148

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

M39029/58-360

Tri-star Electronics International

CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

RN41N-I/RM

Microchip Technology

Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.

Details

1N4148WS

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMP-MSLD-PCS-16 Technical Details

TYPE	DESCRIPTION
Connector Type:	RF SMP CONNECTOR

Category Top Products

142-1000-003

Vertiv

RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; MIL Conformity: NO; Characteristic Impedance: 50 ohm; Panel Mount: NO;

SF1521-60061

Sv Microwave

SF1521-60061 by Sv Microwave is a 50 ohm RF CONNECTOR with gold (Au) - nickel (Ni) finish. It has a max frequency of 40 GHz and features ULTEM insulator material. Ideal for panel mount applications, this threaded connector is designed for high-frequency signal transmission in various electronic systems.

MS-162B

Hirose Electric

The Hirose Electric MS-162B is a female RF connector with 0.7 dB insertion loss and 1.7 VSWR, suitable for up to 10 GHz frequency applications. Featuring gold termination contact finish and liquid crystal polymer insulator, it offers SNAP coupling in a surface mount configuration for board mounting.

MS-156C3

Hirose Electric

The Hirose Electric MS-156C3 RF Connector is a threaded, 50 ohm receptacle with gold contact finish. With dimensions of 0.091" x 0.091" x 0.053", it operates up to 11 GHz and is ideal for surface mount applications on boards.

BJ76

Bel Fuse

BJ76 RF TRB connector by Bel Fuse features a 0.84" body depth, nickel shell finish, and brass shell material. It is designed for panel mounting with solder termination, suitable for commercial applications up to 0.5 GHz frequency. The jack-style connector offers a straight mounting style with coax contact and locking option.

25-7650

Vertiv

RF F CONNECTOR; Manufacturer Series: 25-7650;

PL75C-307

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Shell Material: BRASS; Manufacturer Series: PL75C;

1075-1

Winchester Interconnect

1075-1 by Winchester Interconnect is a RF CONNECTOR with GOLD finish, suitable for 50 ohm systems. It features CRIMP termination and PLUG body style, ideal for CABLE mounting applications in Other Function RF Connectors category.

7325-1512-060

Radiall S A

Radiall S A 7325-1512-060 RF SSLB Connector features 0.187" body diameter, 0.3 dB insertion loss, and gold termination. Ideal for board mounting in applications requiring 50 ohm impedance up to 12.4 GHz frequency range. MIL conformity ensures reliable performance in extreme temperatures from -65°C to 165°C.

127-0693-001

Vertiv

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Maximum Operating Frequency: 40 GHz;

A-1JA

Amphenol

A-1JA RF connector by Amphenol features a body length of 0.102", insulation resistance of 500M ohm, and dielectric voltage withstand of 200VAC. Ideal for board mounting in commercial applications, this male jack connector has a characteristic impedance of 50 ohm and operates up to 6GHz frequency.

SF3211-6004

Sv Microwave

SF3211-6004 by Sv Microwave is a 50 ohm RF connector with a max operating frequency of 65 GHz. It features a low insertion loss of 0.97 dB and a voltage standing wave ratio of 1.3. This connector is commonly used in high-frequency applications requiring reliable signal transmission.

R222.151.000

Radiall S A

R222.151.000 by Radiall S A is an RF SMP connector with a body diameter of 0.189 inch and a max operating frequency of 26.5 GHz. It is commonly used in commercial applications requiring a characteristic impedance of 50 ohm and a durability of 100 cycles.

3285-6001-TD

Sv Microwave

3285-6001-TD by Sv Microwave is a RF SMPM connector with 50 ohm impedance, gold finish, and right angle mounting. Ideal for applications requiring high frequency up to 40 GHz such as aerospace and defense systems.

U.FL-R-SMT(10)

Hirose Electric

U.FL-R-SMT(10) by Hirose Electric is a RF connector with 50 ohm impedance, suitable for applications up to 6 GHz. Featuring gold termination finish and liquid crystal polymer insulator, it offers high durability with 30 cycles. With a compact body size of 0.112" x 0.079" x 0.102", it is ideal for board mounting in commercial settings.

1064538-1

TE Connectivity

TE Connectivity's 1064538-1 RF SSMT CONNECTOR features a body diameter of 0.1", insulation resistance of 1000000000 ohm, and EMI shielding. Ideal for commercial applications, this connector has a max operating frequency of 6 GHz and operates in temperatures ranging from -40 to 125 °C.

73412-0110

Molex

Molex 73412-0110 RF Connector features 50 ohm impedance, 6 GHz frequency, and 90VAC dielectric voltage. Ideal for commercial applications, it offers a durable design with gold nickel finish and liquid crystal polymer insulator for reliable performance in temperatures ranging from -40 to 90°C.

1055689-1

TE Connectivity

The TE Connectivity 1055689-1 RF SSMT Connector features a 0.15 dB insertion loss, 5000000000 ohm insulation resistance, and 6 GHz max operating frequency. Ideal for commercial applications, this male plug connector with a characteristic impedance of 50 ohm is designed for board mounting in straight orientation.

73415-3030

Molex

Molex 73415-3030 RF SMP Connector features 0.177" body diameter, 0.1 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for applications requiring a durable RF connector with a characteristic impedance of 50 ohm, such as in commercial settings up to 40 GHz frequency.

2334884-1

TE Connectivity

TE Connectivity 2334884-1 RF Connector has a body depth of 0.023", SNAP coupling type, and operates b/w -40 to 85°C. With characteristic impedance of 50 ohm, it is ideal for board mounting in applications up to 6 GHz frequency range.