Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

E.FL-LR-SMT(10)

Manufacturer

Hirose Electric
Manufacturer's Part Number

E.FL-LR-SMT(10)
Description

RF UMC/UMCC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 2 GHz; Panel Mount: NO; Mating Contact Finish: NOT SPECIFIED;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Siemens

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

Details

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

BAV99

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NDT2955

Onsemi

NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

BAV99

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

BAV99

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WS

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

BAV99

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Semicoa

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

E.FL-LR-SMT(10) Technical Details

TYPE	DESCRIPTION
Mounting Style:	RIGHT ANGLE
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.3
Filter Feature:	NO
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	BOARD
JESD-609 Code:	e3
MIL Conformity:	NO
Coupling Type:	SNAP
Termination Type:	SURFACE MOUNT
Termination Contact Finish:	Tin (Sn)
Contact Gender:	FEMALE
Characteristic Impedance:	50 ohm
Insulator Material:	LIQUID CRYSTAL POLYMER
Connector Type:	RF UMC/UMCC CONNECTOR
Contact Material:	NOT SPECIFIED
Additional Features:	LOW PROFILE
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	2 GHz
Body or Shell Style:	RECEPTACLE
DIN Conformance:	NO

Category Top Products

A-1JB

Amphenol

A-1JB RF connector by Amphenol features a body length of 0.102", dielectric voltage of 300VAC, and insulation resistance of 500M ohm. Ideal for commercial applications, this male jack connector has a characteristic impedance of 50 ohm, operates up to 6GHz frequency, and is designed for surface mount termination on boards.

1065-1QD

Winchester Interconnect

RF CONNECTOR; Manufacturer Series: 1065-1QD;

141-0003-0001

TE Connectivity

TE Connectivity 141-0003-0001 RF Connector has a body diameter of 0.156", gold termination finish, and threaded coupling. With 50 ohm impedance, it's ideal for applications requiring a max frequency of 2 GHz, rated at 3A signal current. Suitable for panel mounting with solder termination in female gender receptacle style.

FFA.00.250.NTAC31

Lemo Usa

FFA.00.250.NTAC31 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.

128-0711-201

Cinch Connectivity Solutions

128-0711-201 RF connector by Cinch Connectivity Solutions features a gold termination finish, SNAP coupling type, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 6 GHz, such as surface mount boards needing reliable female receptacle connectors.

MM8130-2600

Murata Manufacturing

MM8130-2600 by Murata Manufacturing is a RF CONNECTOR with SNAP coupling, 50 ohm impedance, and 6 GHz max frequency. It is a FEMALE receptacle for surface mount termination on boards. Operating temperature ranges from -40 to 85 °C, making it ideal for various RF applications.

GRF7-J-P-08-GF-RA-TH1-E

Samtec

The Samtec GRF7-J-P-08-GF-RA-TH1-E RF connector features a body length of 1.576", dielectric voltage of 700VAC, and operating frequency up to 6 GHz. Ideal for commercial applications, this threaded jack connector has a characteristic impedance of 50 ohm and gold-plated contacts for reliable signal transmission.

MS-162B

Hirose Electric

The Hirose Electric MS-162B is a female RF connector with 0.7 dB insertion loss and 1.7 VSWR, suitable for up to 10 GHz frequency applications. Featuring gold termination contact finish and liquid crystal polymer insulator, it offers SNAP coupling in a surface mount configuration for board mounting.

SF9411-6000

Sv Microwave

OTHER RF CONNECTOR;

1065-1RQD

Winchester Interconnect

1065-1RQD by Winchester Interconnect is a male coax plug RF connector with brass shell, nickel over copper finish, and polyethylene insulator. It features crimp termination for cable mounting and locking option-1 for reliability in commercial applications.

19S102-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S102-40ML5 RF SMP connector by Rosenberger features 0.63 dB insertion loss, 1.5 VSWR, and operates up to 40 GHz. With MIL conformity, GOLD finish, and SNAP coupling, it is ideal for high-frequency applications requiring a characteristic impedance of 50 ohm.

1-330723-2

TE Connectivity

TE Connectivity 1-330723-2 RF Connector features bayonet coupling, PTFE insulator, and brass shell. With 50 ohm impedance, it operates up to 2 GHz frequency. Ideal for commercial applications requiring durable connectors with a rated current of 2A.

73415-3310

Molex

The Molex 73415-3310 RF SMP Connector features a 0.236" body diameter, gold/nickel termination contact finish, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 40 GHz.

BJ72

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Frequency: .5 GHz; Termination Type: SOLDER; No. of Ports: 1;

MS-147(01)

Hirose Electric

The Hirose Electric MS-147(01) RF connector features a body length of 0.228", insertion loss of 0.8 dB, and dielectric voltage withstand of 100VAC. Ideal for board mounting applications in commercial settings, this female jack connector has a characteristic impedance of 50 ohm and operates up to 6 GHz with gold termination finish.

U.FL-R-SMT(10)

Hirose Electric

U.FL-R-SMT(10) by Hirose Electric is a RF connector with 50 ohm impedance, suitable for applications up to 6 GHz. Featuring gold termination finish and liquid crystal polymer insulator, it offers high durability with 30 cycles. With a compact body size of 0.112" x 0.079" x 0.102", it is ideal for board mounting in commercial settings.

141-0003-0001

Malco Microdot Uk

RF CONNECTOR; Contact Gender: FEMALE; MIL Conformity: NO; Mounting Style: STRAIGHT; Coupling Type: THREADED; Body or Shell Style: RECEPTACLE;

222128-10

Amphenol

Amphenol 222128-10 RF Connector features threaded coupling, Delrin/Polypropylene insulator, and tin contact finish. Ideal for board and panel mounting in applications requiring reliable RF connections.

73415-3032

Molex

Molex 73415-3032 RF SMP Connector features 0.1 dB insertion loss, 50 ohm impedance, and 40 GHz max operating frequency. Ideal for high-frequency signal transmission in applications requiring a right-angle jack connector with snap coupling type and PTFE insulator material.

96_MMPX-50-0-2/111_NM

Huber+suhner Ag

96_MMPX-50-0-2/111_NM RF connector by Huber+suhner Ag features a SNAP coupling type, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm characteristic impedance. Ideal for applications requiring a durable FEMALE JACK connector with a max operating frequency of 65 GHz on BOARD mounting.