Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1621-60050

Manufacturer

Sv Microwave
Manufacturer's Part Number

1621-60050
Description

RF 2.4MM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Body Diameter: .295 inch; Characteristic Impedance: 50 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

NE555D

Philips Semiconductors

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Good-ark Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

Details

SMBJ18CA

Jiangsu Jiejie Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

BAV99

Won-top Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Onsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

2N7002DWH6327XTSA1

Infineon Technologies

2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.

Details

BAV99

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

1N4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358AN

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

06035C104KAT2A

KYOCERA AVX

06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

1621-60050 Technical Details

TYPE	DESCRIPTION
Mounting Style:	RIGHT ANGLE
Panel Mount:	NO
Mounting Type:	BOARD
Shell Finish:	GOLD
Body Depth:	.595 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Coupling Type:	THREADED
Termination Type:	SURFACE MOUNT
Maximum Operating Temperature (Cel):	165
Contact Gender:	FEMALE
Body Diameter:	.295 inch
Characteristic Impedance:	50 ohm
Insulator Material:	POLYETHERIMIDE
Connector Type:	RF 2.4MM CONNECTOR
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	50 GHz
Shell Material:	STAINLESS STEEL
Body or Shell Style:	JACK

Category Top Products

U.FL-R-SMT-1(60)

Hirose Electric

U.FL-R-SMT-1(60) by Hirose Electric is a surface mount RF connector with a body length of 0.122 inch, body width of 0.118 inch, and body depth of 0.049 inch. It has a max operating frequency of 6 GHz and is commonly used in commercial applications requiring a characteristic impedance of 50 ohm.

331-0472-201

Hirose Electric

OTHER RF CONNECTOR;

925-144J-51PT

Amphenol

RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

119S141-40ML5

Rosenberger Hochfrequenztechnik & Kg

Rosenberger's 119S141-40ML5 RF SMP Connector features 0.09 dB insertion loss, SNAP coupling type, and PEEK/PTFE/LCP insulator. Ideal for board mounting in applications up to 10 GHz requiring a 50 ohm characteristic impedance.

R123.415.000

Radiall S A

R123.415.000 RF Connector by Radiall S A features a low insertion loss of 0.12 dB and a VSWR of 1.07, suitable for applications up to 6 GHz. With gold termination contacts and PTFE insulator material, this panel-mount connector is ideal for high-frequency RF systems requiring a 50 ohm characteristic impedance with snap coupling.

1-1337551-0

TE Connectivity

TE Connectivity 1-1337551-0 RF Connector features 5000000000 ohm Insulation Resistance, 0.2 dB Insertion Loss, and THREADED Coupling Type. Ideal for applications requiring a durable F CONNECTOR with 50 ohm Characteristic Impedance, suitable for RG-174A/U cable types and operating up to 2 GHz frequency.

R285001021

Radiall S A

R285001021 by Radiall S A is a SNAP type RF connector with 50 ohm impedance, suitable for up to 3 GHz frequency. It features a male wire termination and plug body style, ideal for cable mounting applications requiring high-frequency signal transmission.

PL3155AC-201

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: PL3155AC; Body or Shell Style: PLUG; Shell Material: BRASS;

1086009-1

Amphenol

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 1; Insertion Loss: .14 dB; IEC Conformity: NO;

920-265J-51P

Amphenol

RF CONNECTOR; Manufacturer Series: 920-265J-51P;

73415-5740

Molex

Molex 73415-5740 RF SMP Connector features SNAP coupling, PTFE insulator, gold finish, and brass shell. With 50 ohm impedance and 40 GHz frequency, it's ideal for high-frequency applications. Suitable for surface mount board mounting with male contact gender in plug style.

GRF7-J-P-08-GF-RA-TH1-E

Samtec

The Samtec GRF7-J-P-08-GF-RA-TH1-E RF connector features a body length of 1.576", dielectric voltage of 700VAC, and operating frequency up to 6 GHz. Ideal for commercial applications, this threaded jack connector has a characteristic impedance of 50 ohm and gold-plated contacts for reliable signal transmission.

CJT-T-P-HH-RA-TH1

Samtec

Samtec's CJT-T-P-HH-RA-TH1 RF connector features gold termination, 0.428" body depth, and snap coupling. Ideal for commercial applications, it offers 100 ohm impedance and operates up to 4 GHz frequency. This male coaxial jack with solder termination is designed for board mounting with locking option.

EM30MSD(02)

Hirose Electric

OTHER RF CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Silver (Ag);

SF1212-6000

Sv Microwave

SF1212-6000 by Sv Microwave is an RF SMP connector with a body diameter of 0.164" and depth of 0.32". Featuring a VSWR of 1.35, it operates up to 20 GHz and has a characteristic impedance of 50 ohm. Ideal for board mounting applications requiring right angle male connectors terminated via soldering.

73415-3030

Molex

Molex 73415-3030 RF SMP Connector features 0.177" body diameter, 0.1 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for applications requiring a durable RF connector with a characteristic impedance of 50 ohm, such as in commercial settings up to 40 GHz frequency.

1056731-1

TE Connectivity

TE Connectivity's 1056731-1 RF Connector features a 50 ohm impedance, stainless steel shell, and -65 to 165°C operating temperature range. Ideal for applications requiring reliable RF connections in various industries.

R223425000W

Radiall S A

R223425000W by Radiall S A is an RF MMBX connector with SNAP coupling type, suitable for board mounting. Featuring a body depth of 0.256", it has a solder termination and female contact gender. Ideal for applications requiring a straight receptacle design in RF connectivity.

3231

Pomona Electronics

The Pomona Electronics 3231 RF Connector features gold-plated termination and mating contacts, with a characteristic impedance of 50 ohm. It utilizes a bayonet coupling type for secure connections and is suitable for applications requiring high-quality signal transmission in straight mounting configurations.

FSNS59U-25

Belden

Belden FSNS59U-25 RF F CONNECTOR has Insertion Loss of -0.2 dB, VSWR of -1.07, and 75 ohm Impedance. It operates b/w -40 to 60 °C and supports up to 1 GHz frequency. Ideal for cable applications requiring threaded coupling in CE standard environments.