Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

920-265J-51P

Manufacturer

Amphenol
Manufacturer's Part Number

920-265J-51P
Description

RF CONNECTOR; Manufacturer Series: 920-265J-51P;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148W-T

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Transpro Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Details

BSS138

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;

Details

LM107H/883

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

LM107H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

Details

BAV99

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

M39029/56-351

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;

Details

1N4148

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FDN5618P

Onsemi

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

Details

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

Details

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Details

SMBJ18CA

Pulse Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

Details

920-265J-51P Technical Details

TYPE	DESCRIPTION
Connector Type:	RF CONNECTOR
Manufacturer Series:	920-265J-51P

Category Top Products

141-0003-0001

Malco Microdot Uk

RF CONNECTOR; Contact Gender: FEMALE; MIL Conformity: NO; Mounting Style: STRAIGHT; Coupling Type: THREADED; Body or Shell Style: RECEPTACLE;

SMP-MSSB-PCS-1

Amphenol

Amphenol's SMP-MSSB-PCS-1 is a 50 ohm RF SMP connector with gold finish, suitable for applications up to 40 GHz. Featuring snap coupling and PTFE insulator, it operates b/w -40°C to 85°C. Ideal for surface mount board mounting, this male plug connector offers low VSWR of 1.5 for high-frequency transmissions.

2101510-2

TE Connectivity

TE Connectivity's 2101510-2 RF SMPM Connector operates b/w -65 to 165°C, with a characteristic impedance of 50Ω. Featuring a stainless steel shell, it has one connector and four contacts for board mounting applications.

SF4546-6011

Sv Microwave

Other RF Connectors;

81_MMBX-S50-0-1/111_NH

Huber+suhner Ag

81_MMBX-S50-0-1/111_NH by Huber+suhner Ag is a RF MMBX CONNECTOR with characteristic impedance of 50 ohm, operating up to 12.4 GHz. It features SNAP coupling, LCP/PFA insulator, and brass shell material. Ideal for board mounting in commercial applications due to its durability of 100 cycles and temperature range from -55 to 155 °C.

R222152000

Radiall S A

The Radiall S A R222152000 RF SMP Connector features a low insertion loss of 0.76 dB and high VSWR of 1.35, suitable for applications up to 40 GHz. With gold-plated contacts and PTFE insulator, it offers reliable performance in temperatures ranging from -65°C to 105°C. Ideal for cable mounting with right-angle style, this connector is commonly used in RF communication systems.

1211-66195-TD

Sv Microwave

RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;

U.FL-R-SMT-1(01)

Hirose Electric

Hirose Electric U.FL-R-SMT-1(01) is a 50 ohm RF connector with gold termination, suitable for board mounting. With a frequency range up to 6 GHz and VSWR of 1.3, it's ideal for commercial applications requiring high durability and reliability in temperatures ranging from -40°C to 90°C.

81_MMBX-S50-0-1/111_NM

Huber+suhner Ag

81_MMBX-S50-0-1/111_NM by Huber+suhner Ag is a RF MMBX CONNECTOR with SNAP coupling, LCP/PFA insulator, and BRASS shell. It operates b/w -55 to 155 °C, has 1.15 VSWR, and supports up to 12.4 GHz frequency. Ideal for commercial applications requiring durable connectors with 50 ohm impedance for surface mount on boards.

131-0140-0001

TE Connectivity

TE Connectivity's 131-0140-0001 RF Connector features gold termination, threaded coupling, and PTFE insulator. With 50 ohm impedance and 2 GHz frequency, it is ideal for commercial applications requiring reliable signal transmission via cable or panel mounting.

5-1634552-1

TE Connectivity

TE Connectivity 5-1634552-1 RF Connector features threaded coupling, polymethylpentene insulator, and 75 ohm impedance. Ideal for commercial applications with a frequency up to 2 GHz, operating temperature range of -55 to 85°C, and durability of 50 cycles.

SF1611-60021-2S

Sv Microwave

SF1611-60021-2S by Sv Microwave is a 50 ohm RF 2.4mm connector with 0.283 dB insertion loss and 1.28 VSWR, suitable for applications up to 50 GHz. Featuring threaded coupling, stainless steel shell, and male contact gender, it supports board and panel mounting in environments ranging from -65°C to 165°C.

SMP-PL-P-HG-ST-TH2

Samtec

SMP-PL-P-HG-ST-TH2 by Samtec is a 50 ohm RF connector with GOLD OVER NICKEL finish. Featuring THREADED coupling, it has a max freq of 40 GHz and VSWR of 1.5. Ideal for high-frequency applications on boards requiring SOLDER termination in STRAIGHT mounting style.

1056721-1

TE Connectivity

TE Connectivity's 1056721-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring a single port RF connection with straight mounting style.

73415-3310

Molex

The Molex 73415-3310 RF SMP Connector features a 0.236" body diameter, gold/nickel termination contact finish, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 40 GHz.

19S102-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S102-40ML5 RF SMP connector by Rosenberger features 0.63 dB insertion loss, 1.5 VSWR, and operates up to 40 GHz. With MIL conformity, GOLD finish, and SNAP coupling, it is ideal for high-frequency applications requiring a characteristic impedance of 50 ohm.

861V509ER6

Winchester Interconnect

861V509ER6 by Winchester Interconnect is a threaded RF connector with a max operating temperature of 65°C and a min operating temperature of -40°C. It has a characteristic impedance of 75 ohm and can handle frequencies up to 3 GHz. This connector is commonly used in applications requiring high-frequency signal transmission, such as telecommunications and wireless communication systems.

DIN7A-PP-C-GF-ST-CA3

Samtec

Samtec DIN7A-PP-C-GF-ST-CA3 is a 1.0/2.3 DIN RF connector with 75 ohm impedance, gold over nickel termination, and snap coupling. Ideal for cable mounting applications, it has a body diameter of 0.325" and operates b/w -65°C to 125°C temperatures.

MM8130-2600

Murata Manufacturing

MM8130-2600 by Murata Manufacturing is a RF CONNECTOR with SNAP coupling, 50 ohm impedance, and 6 GHz max frequency. It is a FEMALE receptacle for surface mount termination on boards. Operating temperature ranges from -40 to 85 °C, making it ideal for various RF applications.

3221-4002

Sv Microwave

The SV Microwave 3221-4002 RF SMPM Connector has a body diameter of 0.181", insertion loss of 0.97 dB, and operates up to 65 GHz. With a coupling type of SNAP, it is ideal for high-frequency applications requiring low signal loss and precise connections. The connector features gold shell finish, PTFE insulator material, and beryllium copper shell material for reliable performance in temperatures ranging from -55°C to 125°C.