Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SMP-MSLD-PCS-5T

Manufacturer

Amphenol
Manufacturer's Part Number

SMP-MSLD-PCS-5T
Description

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 470VAC; Insulation Resistance: 5000000000 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

BAV99

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0520LT3G

Onsemi

MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.

Details

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NE555D

Texas Instruments

NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

LM358N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM358N

Kec

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Rfe International

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;

Details

2N2222A

Central Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;

Details

SS14

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

08055C104KAT4A

KYOCERA AVX

08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.

Details

M24308/2-1F

Defense Logistics Agency

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;

Details

1N4148

Kec

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Details

LL4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;

Details

SMP-MSLD-PCS-5T Technical Details

TYPE	DESCRIPTION
Voltage Standing Wave Ratio:	1.3
Panel Mount:	NO
Sub-Category:	Other RF Connectors
Shell Finish:	GOLD OVER NICKEL
Termination Type:	SURFACE MOUNT
Maximum Operating Temperature (Cel):	165
Body Length:	.197 inch
Contact Gender:	MALE
Connector Type:	RF SMP CONNECTOR
Mounting Option-1:	LOCKING
Contact Resistance:	6 mohm
Insulation Resistance:	5000000000 ohm
Mounting Style:	STRAIGHT
Other Names:	ARF3108CT ARF3108TR ARF3108DKR
No. of Ports:	1
Contact Style:	COAX
Durability:	500 Cycles
Mounting Type:	BOARD
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Minimum Withdrawal Force (N):	8.896
Maximum Insertion Force (N):	44.48
Body Width:	.197 inch
Dielectric Withstanding Voltage (V):	470VAC
Characteristic Impedance:	50 ohm
Insulator Material:	LIQUID CRYSTAL POLYMER
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	18 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK
Reliability:	COMMERCIAL

Category Top Products

1056550-1

TE Connectivity

TE Connectivity's 1056550-1 RF SMP Connector features an Insulation Resistance of 5G ohm, Insertion Loss of 0.62 dB, and operates up to 26.5 GHz. Ideal for applications requiring a durable, high-frequency RF connector with a characteristic impedance of 50 ohm and a max operating temperature of 165°C.

3221-40132

Sv Microwave

RF SMPM CONNECTOR;

GRF7-J-P-04-GF-ST-TH1-E

Samtec

The Samtec GRF7-J-P-04-GF-ST-TH1-E RF connector has a body length of 1.268", operates up to 6 GHz, and features gold over nickel termination. Ideal for board mounting applications requiring a 75 ohm characteristic impedance, this female jack connector is designed with PTFE insulator material for reliable performance in temperatures ranging from -55°C to 125°C.

5-1814822-7

TE Connectivity

RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; DIN Conformance: NO; IEC Conformity: NO;

73415-3591

Molex

The Molex 73415-3591 RF SMP Connector features a body diameter of 0.25", gold termination contact finish, and a max operating frequency of 40 GHz. Ideal for board mounting applications in commercial settings, with durability up to 500 cycles and a characteristic impedance of 50 ohm.

1235

Ntt

RF CONNECTOR; Manufacturer Series: 1235;

HRMJ-U.FLP(40)

Hirose Electric

OTHER RF CONNECTOR; Reliability: COMMERCIAL; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; IEC Conformity: NO;

FAA.1D.694.CNL

Lemo Usa

FAA.1D.694.CNL by Lemo Usa is a panel mount RF connector with snap coupling, polyamide insulator, and solder termination. It features a male contact gender and plug body style for straight mounting applications in the RF field.

TC-400-716M-X

Times Microwave Systems

TC-400-716M-X by Times Microwave Systems is an RF 7/16 DIN connector with 0.05 dB insertion loss and 1.3 VSWR, suitable for up to 6 GHz frequency applications. Featuring threaded coupling and PTFE insulator, it has a characteristic impedance of 50 ohm and conforms to IEC standards. Ideal for cable mounting in various RF connectivity setups.

82_MMBX-50-0-2/111_NE

Huber+suhner Ag

82_MMBX-50-0-2/111_NE RF connector by Huber+suhner Ag features a gold (Au) termination finish, liquid crystal polymer insulator, and 1.15 VSWR. With a max operating frequency of 12.4 GHz, it is ideal for board mounting applications requiring a durable female jack connector with 50 ohm impedance.

MM8430-2610RB3

Murata Manufacturing

Murata Manufacturing's MM8430-2610RB3 RF connector features 0.2 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for commercial applications, it offers a durability of 500 cycles with a voltage standing wave ratio of 1.3.

119S104-40ML5

Rosenberger Hochfrequenztechnik & Kg

The Rosenberger Hochfrequenztechnik & Kg 119S104-40ML5 RF SMP Connector features 0.09 dB insertion loss, threaded coupling type, and gold termination contact finish. With a max operating frequency of 10 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and surface mount termination on boards.

SMP-MSLD-PCS-5T

Amphenol

Amphenol SMP-MSLD-PCS-5T RF connector features 50 ohm impedance, 1.3 VSWR, and 18 GHz operating frequency. Ideal for commercial applications, it has a liquid crystal polymer insulator, gold over nickel finish, and can withstand temperatures from -65 to 165 °C.

GRF7-J-P-04-GF-RA-TH1-E

Samtec

Samtec's GRF7-J-P-04-GF-RA-TH1-E RF Connector features 4 ports, 50 ohm impedance, and a dielectric voltage of 700VAC. With a threaded coupling type, it is ideal for commercial applications requiring a reliable signal connection up to 6 GHz frequency.

SF1621-60026-1S

Sv Microwave

SF1621-60026-1S by Sv Microwave is a threaded RF connector with 0.283 dB insertion loss, 50 ohm impedance, and 50 GHz operating frequency. Ideal for panel mount applications in high-frequency environments due to its stainless steel shell, polyetherimide insulator, and surface mount termination.

81_MMBX-S50-0-1/111_NE

Huber+suhner Ag

81_MMBX-S50-0-1/111_NE by Huber+suhner Ag is a RF MMBX CONNECTOR with SNAP coupling, LCP/PFA insulator, and 50 ohm impedance. It operates up to 12.4 GHz at -55 to 155 °C, suitable for BOARD mounting in commercial applications requiring durable connectors with low VSWR.

CONUFL001-SMD-T

Linx Technologies

CONUFL001-SMD-T by Linx Technologies is a threaded RF connector with dimensions of 0.122" x 0.118" x 0.049". It operates b/w -40°C to 90°C, has a characteristic impedance of 50Ω, and supports frequencies up to 6 GHz. Ideal for surface mount applications in various electronic devices.

59S2AQ-40MT5-B_1

Rosenberger Hochfrequenztechnik & Kg

59S2AQ-40MT5-B_1 RF connector by Rosenberger features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. Ideal for commercial applications requiring a durable, right angle plug with locking mounting option. Operating temperatures range from -40 to 105°C.

U.FL-R-SMT-1(40)

Hirose Electric

U.FL-R-SMT-1(40) by Hirose Electric is a 50 ohm RF connector with 0.05 dB insertion loss, suitable for applications up to 6 GHz. Featuring a dielectric voltage of 200VAC and insulation resistance of 500MΩ, it is ideal for board mounting in commercial settings. With a durability of 30 cycles and surface mount termination, this connector offers reliable performance in various electronic devices.

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.