Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

18S141-40ML5

Manufacturer

Rosenberger Hochfrequenztechnik & Kg
Manufacturer's Part Number

18S141-40ML5
Description

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 450VAC; Insulation Resistance: 5000000000 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

BAV99

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Weitron Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

Details

LM317T

Integrated Power Semiconductors

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

E8WSDC12-32.768KTR

Ecliptek

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WT

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS84PH6327XTSA2

Infineon Technologies

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

Details

SS14

Rugao Dachang Electronic

RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;

Details

1N4148WS

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Semtech

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

18S141-40ML5 Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.92
IEC Conformity:	NO
Panel Mount:	NO
Sub-Category:	Other RF Connectors
MIL Conformity:	NO
Termination Type:	SURFACE MOUNT
Maximum Operating Temperature (Cel):	155
Body Length:	.157 inch
Contact Gender:	MALE
Connector Type:	RF SMP CONNECTOR
Contact Material:	NOT SPECIFIED
Mounting Option-1:	LOCKING
Contact Resistance:	6 mohm
Insulation Resistance:	5000000000 ohm
Mounting Style:	STRAIGHT
Other Names:	1868-1081 189576
Insertion Loss:	.4 dB
No. of Ports:	1
Contact Style:	COAX
Filter Feature:	NO
Durability:	100 Cycles
Mounting Type:	BOARD
Body Depth:	.134 inch
Minimum Operating Temperature:	-55 Cel
Total No. of Contacts:	1
Body Width:	.157 inch
Dielectric Withstanding Voltage (V):	450VAC
Coupling Type:	SNAP
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Additional Features:	CAPTIVE CENTER CONTACT, INSERTION LOSS MAX AT: 16 GHZ, VSWR MAX AT: 26 GHZ
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	65 GHz
Body or Shell Style:	PLUG
Reliability:	COMMERCIAL
DIN Conformance:	NO

Category Top Products

3230

Pomona Electronics

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Panel Mount: NO; Characteristic Impedance: 50 ohm; Coupling Type: BAYONET;

R285001021

Radiall S A

R285001021 by Radiall S A is a SNAP type RF connector with 50 ohm impedance, suitable for up to 3 GHz frequency. It features a male wire termination and plug body style, ideal for cable mounting applications requiring high-frequency signal transmission.

MM8130-2600RA2

Murata Manufacturing

Murata MM8130-2600RA2 RF Connector features 0.2 dB insertion loss, 1.3 VSWR, and 6 GHz max operating frequency. Ideal for board mounting in applications requiring a 50 ohm characteristic impedance and surface mount termination.

MS-147-C(LP)-1

Hirose Electric

MS-147-C(LP)-1 by Hirose Electric is a RF connector with 0.4 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. It is used in commercial applications requiring durable connectors with snap coupling, gold finish, and male contact gender for cable mounting.

1055688-1

TE Connectivity

TE Connectivity's 1055688-1 RF SSMT CONNECTOR features a gold-plated contact finish with nickel barrier, SNAP coupling type, and polyphenylene sulfide insulator. With an insertion loss of 0.15 dB and VSWR of 1.4, it is ideal for applications requiring a durable male plug connector with a characteristic impedance of 50 ohm, operating up to 6 GHz.

SMZ6121A6-3GT30G-6-75

Amphenol

Amphenol's SMZ6121A6-3GT30G-6-75 RF Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and 1.2 Voltage Standing Wave Ratio. Ideal for commercial applications with a max operating frequency of 3 GHz, this connector is designed for use in RF systems requiring high reliability and a characteristic impedance of 75 ohm.

M49142/03-0008

Winchester Interconnect

Winchester Interconnect's M49142/03-0008 RF TRB Connector features gold termination and mating contact finish, bayonet coupling type, and MIL conformity. Ideal for male cable mounting applications requiring a plug with straight mounting style.

1056550-1

TE Connectivity

TE Connectivity's 1056550-1 RF SMP Connector features an Insulation Resistance of 5G ohm, Insertion Loss of 0.62 dB, and operates up to 26.5 GHz. Ideal for applications requiring a durable, high-frequency RF connector with a characteristic impedance of 50 ohm and a max operating temperature of 165°C.

131-8001

Amphenol

Amphenol 131-8001 RF Connector features 0.06 dB insertion loss, 1.49 VSWR, and 50 ohm impedance. Ideal for high-frequency applications up to 50 GHz with SNAP coupling and PTFE insulator in cable installations.

73415-3310

Molex

The Molex 73415-3310 RF SMP Connector features a 0.236" body diameter, gold/nickel termination contact finish, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 40 GHz.

3232

Pomona Electronics

3232 by Pomona Electronics is an RF connector with gold termination and mating contact finish. Featuring bayonet coupling, it has a characteristic impedance of 50 ohm and solder termination type. Ideal for applications requiring high-quality female-female-female connectors in RF systems.

1-330723-2

TE Connectivity

TE Connectivity 1-330723-2 RF Connector features bayonet coupling, PTFE insulator, and brass shell. With 50 ohm impedance, it operates up to 2 GHz frequency. Ideal for commercial applications requiring durable connectors with a rated current of 2A.

HK-LR-SR2

Hirose Electric

RF CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;

1056551-1

TE Connectivity

TE Connectivity 1056551-1 RF Connector features 50 ohm impedance, 0.12 dB insertion loss, and 26.5 GHz max frequency. Ideal for commercial applications, it has a durable beryllium copper shell with gold finish and PTFE insulator for high reliability in temperatures ranging from -65 to 165 °C.

2401

Pomona Electronics

Pomona Electronics' 2401 RF Connector features gold termination, bayonet coupling, and beryllium copper contact material. With a characteristic impedance of 50 ohm, it is ideal for solder termination in RF applications requiring female-female-male connectivity.

531-40193-HF

Amphenol

Amphenol 531-40193-HF RF F connector has a threaded coupling type, 75 ohm impedance, and operates up to 3 GHz. It is used in commercial applications for board mounting with a durability of 500 cycles.

EZ-1200-78EIA-RA-2

Times Microwave Systems

RF CONNECTOR;

85305-0232

Molex

Molex 85305-0232 RF SMP Connector features 0.1 dB insertion loss, 50 ohm impedance, and 40 GHz operating frequency. Ideal for board mounting applications requiring high-frequency signal transmission with a male plug connector in a straight mounting style.

222153

Amphenol

Amphenol 222153 RF F Connector has gold contact finish, threaded coupling type, and PTFE insulator material. It is used in commercial applications with RG-59 cable types for 1 GHz frequency at temperatures ranging from -40 to 60°C.

5864-5001-10

TE Connectivity

TE Connectivity 5864-5001-10 RF Connector features 0.1 dB Insertion Loss, 50 ohm Impedance, and 6 GHz Operating Frequency. Ideal for board mounting applications with gold termination finish and PTFE insulator material.