Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

M49142/08-0006

Manufacturer

Winchester Interconnect
Manufacturer's Part Number

M49142/08-0006
Description

RF CONNECTOR; Option: GENERAL PURPOSE; IEC Conformity: NO; Coupling Type: THREADED; Termination Contact Finish: GOLD; Mounting Type: CABLE;
Datasheet

Datasheet

Not In Stock

Popular Products

NE555D

NXP Semiconductors

SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LL4148

Continental Device India

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

SMBJ18CA

Concord Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;

Details

2N2222A

Crystalonics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

LM317AEMP/NOPB

Texas Instruments

LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.

Details

LL4148-GS08

Telefunken Microelectronics

RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;

Details

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

Details

1N4148WS

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Dc Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;

Details

LM317TG

Texas Instruments

LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138W-7-F

Diodes Incorporated

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M49142/08-0006 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Mating Contact Finish:	GOLD
Filter Feature:	NO
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	CABLE
JESD-609 Code:	e4
MIL Conformity:	YES
Coupling Type:	THREADED
Termination Contact Finish:	GOLD
Insulator Material:	POLYTETRAFLUOROETHYLENE
Connector Type:	RF CONNECTOR
Option:	GENERAL PURPOSE
Manufacturer Series:	M49142/08
Body or Shell Style:	PLUG
DIN Conformance:	NO

Category Top Products

142-1002-0001

Malco Microdot Uk

RF CONNECTOR; Contact Gender: MALE; Body or Shell Style: PLUG; Panel Mount: NO; Mounting Type: CABLE; Manufacturer Series: SLIDE-ON;

82_MMBX-50-0-14/111_NH

Huber+suhner Ag

82_MMBX-50-0-14/111_NH by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.

AFI-J-P-HF-ST-MT1

Samtec

Samtec AFI-J-P-HF-ST-MT1 RF connector features 50 ohm impedance, SNAP coupling, and 6 GHz operating frequency. Ideal for board mounting applications requiring a female jack connector with POLYTETRAFLUOROETHYLENE insulator material.

141-0003-0001

TE Connectivity

TE Connectivity 141-0003-0001 RF Connector has a body diameter of 0.156", gold termination finish, and threaded coupling. With 50 ohm impedance, it's ideal for applications requiring a max frequency of 2 GHz, rated at 3A signal current. Suitable for panel mounting with solder termination in female gender receptacle style.

PE4183

Pasternack Enterprises

PE4183 by Pasternack Enterprises is a RF HN CONNECTOR with 50 ohm impedance, gold/nickel finish, and 10 GHz frequency. Ideal for panel mounting in applications requiring high-frequency signal transmission.

CBJR70/A

Vertiv

CBJR70/A by Vertiv is a right angle RF connector with a body diameter of 0.38" and shell material made of brass. It features female contact gender, solder termination type, and operates at a max frequency of 0.5 GHz. Ideal for commercial applications requiring reliable coaxial connections on circuit boards.

SMP-MSFD-PCE-1

Amphenol

Amphenol SMP-MSFD-PCE-1 RF connector features 50 ohm impedance, 18 GHz frequency, and 700VAC dielectric voltage. Ideal for commercial applications, it is a female jack with right-angle mounting suitable for surface mount termination on boards.

145-0701-601

Vertiv

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Mating Contact Finish: GOLD (50); Mounting Style: STRAIGHT;

MS-162B(02)

Hirose Electric

Other RF Connectors; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);

302114

Amphenol

Amphenol 302114 RF SMP Connector features gold finish, 50 ohm impedance, and operates up to 26.5 GHz. Ideal for board mounting applications with male contact gender and jack body style. Made of beryllium copper shell material, it withstands temperatures from -65 to 165 °C.

A-1JA

Amphenol

A-1JA RF connector by Amphenol features a body length of 0.102", insulation resistance of 500M ohm, and dielectric voltage withstand of 200VAC. Ideal for board mounting in commercial applications, this male jack connector has a characteristic impedance of 50 ohm and operates up to 6GHz frequency.

1-1532006-1

TE Connectivity

TE Connectivity 1-1532006-1 RF Connector features threaded coupling, 50 ohm impedance, and solder termination. Ideal for panel and cable mounting applications in RF systems requiring female jack connectors.

20279-001E-03

I-pex

The I-pex 20279-001E-03 is a RF MHF connector with a body length of 0.102", body diameter of 0.079", and max operating frequency of 9 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm, such as wireless communication systems.

1996705-4

TE Connectivity

TE Connectivity's 1996705-4 RF SMPM CONNECTOR features SNAP coupling, stainless steel shell, and right angle mounting. With dimensions of 1.12" x 0.85" x 0.392", it operates b/w -55 to 105°C. Ideal for board mounting applications requiring a male contact gender with screw termination.

CX020L2HN

TE Connectivity

TE Connectivity's CX020L2HN RF Connector features a screw coupling type, PTFE insulator material, and 50 ohm characteristic impedance. Ideal for applications requiring a max operating frequency of 60 GHz, such as board-mounted RF connections in electronic devices.

MM8430-2610RA1

Murata Manufacturing

Murata Manufacturing's MM8430-2610RA1 RF Connector offers low insertion loss of 0.1 dB, high durability with 500 cycles, and a max operating frequency of 6 GHz. Ideal for commercial applications requiring a characteristic impedance of 50 ohm, such as in board mounting for reliable RF connections.

BJ159-47

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1700VAC; Body or Shell Style: JACK; Mounting Style: STRAIGHT;

R285001021

Radiall S A

R285001021 by Radiall S A is a SNAP type RF connector with 50 ohm impedance, suitable for up to 3 GHz frequency. It features a male wire termination and plug body style, ideal for cable mounting applications requiring high-frequency signal transmission.

PLR155ACFL-201

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Style: COAX; Termination Type: CRIMP; Mounting Type: CABLE; Body or Shell Style: PLUG;

R285025401W

Radiall S A

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO;