Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

25-7630

Manufacturer

Cinch Connectivity Solutions
Manufacturer's Part Number

25-7630
Description

RF F CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Insulator Material: POLYPHENYLENE; Body or Shell Style: JACK;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WS

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

2N7002

Transys Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;

Details

2N2222A

Infineon Technologies

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

MMBT2907ALT1G

Rochester Electronics

PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;

Details

LM358M

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

MC7805CTG

Onsemi

MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.

Details

1N4148

Rochester Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NDT2955

Onsemi

NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.

Details

PIC18F4550-I/PT

Microchip Technology

PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

Details

FDLL4148

Onsemi

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

STM32H753BIT6

STMicroelectronics

STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.

Details

25-7630 Technical Details

TYPE	DESCRIPTION
Mounting Style:	RIGHT ANGLE
Polarization Key:	POLARIZED HOUSING
No. of Ports:	1
Contact Style:	COAX
Sub-Category:	Other RF Connectors
Mounting Type:	BOARD
Shell Finish:	TIN
Body Depth:	.1 inch
Total No. of Contacts:	1
Termination Type:	SURFACE MOUNT
Contact Gender:	FEMALE
Characteristic Impedance:	75 ohm
Insulator Material:	POLYPHENYLENE
Connector Type:	RF F CONNECTOR
Manufacturer Series:	25
Mounting Option-1:	LOCKING
Maximum Operating Frequency:	1 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK
Reliability:	COMMERCIAL

Category Top Products

1055692-1

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Voltage Standing Wave Ratio: 1.4; Panel Mount: NO;

145-0701-601

Vertiv

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Mating Contact Finish: GOLD (50); Mounting Style: STRAIGHT;

EPY.00.250.NTN

Lemo Usa

EPY.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting applications. It features FEMALE contact gender, RIGHT ANGLE mount style, and 1.25 VSWR ideal for solder termination in RF systems.

FLA.00.250.NTAC27

Lemo Usa

FLA.00.250.NTAC27 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for cable mounting applications. It features a VSWR of 1.25, solder termination, male contact gender, and right-angle plug design.

U.FL-R-SMT-K(800)

Hirose Electric

OTHER RF CONNECTOR;

5-1814823-1

TE Connectivity

RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Frequency: 2 GHz;

272118

Amphenol

RF 7/16 DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Body or Shell Style: PLUG; Panel Mount: NO;

SF2950-6062

Sv Microwave

SF2950-6062 by Sv Microwave is a panel mount RF connector with 50 ohm impedance and 0.03 dB insertion loss. It features PTFE insulation, withstands up to 1400VAC, and operates b/w -65 to 165 °C. Ideal for applications requiring high durability, such as in aerospace or telecommunications industries.

BJ159-47

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1700VAC; Body or Shell Style: JACK; Mounting Style: STRAIGHT;

MS-156C(20)

Hirose Electric

The Hirose Electric MS-156C(20) RF connector features 0.4 dB insertion loss, 1.5 VSWR, and operates up to 11 GHz. It is a surface mount receptacle with TIN termination contact finish, ideal for high-frequency board applications.

1065-1QD

Winchester Interconnect

RF CONNECTOR; Manufacturer Series: 1065-1QD;

636101111001

Wuerth Elektronik & Kg

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: RECEPTACLE; Voltage Standing Wave Ratio: 1.4; Shell Material: PHOSPHOR BRONZE;

TC-400-716M-X

Times Microwave Systems

RF 7/16 DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Characteristic Impedance: 50 ohm; MIL Conformity: NO;

CJT-T-P-HH-RA-TH1

Samtec

Samtec's CJT-T-P-HH-RA-TH1 RF connector features gold termination, 0.428" body depth, and snap coupling. Ideal for commercial applications, it offers 100 ohm impedance and operates up to 4 GHz frequency. This male coaxial jack with solder termination is designed for board mounting with locking option.

MM8030-2610RJ3

Murata Manufacturing

MM8030-2610RJ3 by Murata Manufacturing is a RF connector with a low insertion loss of 0.5 dB and a voltage standing wave ratio of 1.5. It is designed for surface mount termination on boards and can operate at frequencies up to 11 GHz.

1075-1

Winchester Interconnect

1075-1 by Winchester Interconnect is a RF CONNECTOR with GOLD finish, suitable for 50 ohm systems. It features CRIMP termination and PLUG body style, ideal for CABLE mounting applications in Other Function RF Connectors category.

1-1393680-8

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYETHERETHERKETONE; Characteristic Impedance: 75 ohm; Additional Features: VSWR 1.2 UPTO 4 GHZ;

142-1000-003

Vertiv

RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; MIL Conformity: NO; Characteristic Impedance: 50 ohm; Panel Mount: NO;

R222423720

Radiall S A

R222423720 RF connector by Radiall S A features a 0.25" body with SNAP coupling, 50 ohm impedance, and 1.15 VSWR for applications up to 40 GHz. Ideal for surface mount termination on boards, it operates b/w -65°C to 165°C with an insertion loss of 0.76 dB.

SMP-FR-C08-1

Amphenol

RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;