Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

3211-40119

Manufacturer

Sv Microwave
Manufacturer's Part Number

3211-40119
Description

RF SMPM CONNECTOR;
Datasheet

Datasheet

Not In Stock

Popular Products

MBRS140T3G

Onsemi

MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.

Details

M39029/58-360

Conesys

CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

1N4148WT-7

Diodes Incorporated

1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.

Details

L7805CV

Sgs-ates Componenti Electronici S P A

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;

Details

BAV99

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

TE Connectivity

TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.

Details

1N4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NE555D

Philips Semiconductors

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ATMEGA328P-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

Details

2N2222A

Swampscott Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

M24308/2-1F

Souriau-sunbank Connection Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;

Details

MMBT2907ALT1G

Onsemi

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

LAN8720AI-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

BSS138

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

Details

LM555CN

Rca Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

1N4148WS

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

3211-40119 Technical Details

TYPE	DESCRIPTION
Connector Type:	RF SMPM CONNECTOR

Category Top Products

CBJR70A

Cinch Connectivity Solutions

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Diameter: .38 inch; Mounting Option-1: LOCKING; Body or Shell Style: JACK;

11_QMA-50-2-1/133_NH

Huber+suhner Ag

11_QMA-50-2-1/133_NH by Huber+suhner Ag is a RF CONNECTOR with SNAP coupling, suitable for cables with 0.413" diameter. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it's ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85°C.

SMP-PL-P-HG-ST-TH2

Samtec

SMP-PL-P-HG-ST-TH2 by Samtec is a 50 ohm RF connector with GOLD OVER NICKEL finish. Featuring THREADED coupling, it has a max freq of 40 GHz and VSWR of 1.5. Ideal for high-frequency applications on boards requiring SOLDER termination in STRAIGHT mounting style.

MM4829-2702

Murata Manufacturing

Murata Manufacturing's MM4829-2702 RF CONNECTOR has a Voltage Standing Wave Ratio of 1.3, operating up to 6 GHz. With SNAP coupling and 50 ohm impedance, it is ideal for BOARD mounting in high-frequency applications.

331-0472-201

Hirose Electric

OTHER RF CONNECTOR;

R222.151.000

Radiall S A

R222.151.000 by Radiall S A is an RF SMP connector with a body diameter of 0.189 inch and a max operating frequency of 26.5 GHz. It is commonly used in commercial applications requiring a characteristic impedance of 50 ohm and a durability of 100 cycles.

PL11-3

Trompeter Electronics

Trompeter Electronics' PL11-3 RF CONNECTOR features BAYONET coupling, 75Ω impedance, and CRIMP termination. Ideal for CABLE mounting in applications requiring reliable MALE connectors with PLUG body style.

MS-147(01)

Hirose Electric

The Hirose Electric MS-147(01) RF connector features a body length of 0.228", insertion loss of 0.8 dB, and dielectric voltage withstand of 100VAC. Ideal for board mounting applications in commercial settings, this female jack connector has a characteristic impedance of 50 ohm and operates up to 6 GHz with gold termination finish.

PSMP-MSLD-PCSEM

Amphenol

PSMP-MSLD-PCSEM by Amphenol is a RF SMP CONNECTOR with a characteristic impedance of 50 ohm. It has an insertion loss of 0.09 dB and can withstand a max operating frequency of 10 GHz. This connector is commonly used in commercial applications requiring high insulation resistance and surface mount termination.

R222900310

Radiall S A

The Radiall S A R222900310 RF SMP CONNECTOR features a 0.13" body diameter, 0.264" body depth, and 5000000000 ohm insulation resistance. Ideal for RG-196 cable types, it operates at frequencies up to 12.4 GHz with a voltage standing wave ratio of 1.25. This female COAX connector is designed for commercial applications requiring high durability and reliability in temperatures ranging from -55°C to 125°C.

73406-6360

Molex

The Molex 73406-6360 RF SMP Connector features a gold shell finish, PTFE insulator, and Beryllium Copper shell material. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring panel mount with solder termination in straight mounting style.

73387-0020

Molex

Molex 73387-0020 RF connector features threaded coupling, PTFE insulator, 50 ohm impedance, and 50 GHz frequency for board and panel mounting. With a temperature range of -65 to 165°C, it is ideal for high-frequency applications requiring reliable signal transmission in compact spaces.

MS-147(06)

Hirose Electric

MS-147(06) by Hirose Electric is a 50 ohm RF connector with a body length of 0.228 inch and a body width of 0.213 inch. It has an insertion loss of 0.4 dB and can operate at temperatures ranging from -30 to 85 °C. This connector is commonly used in commercial applications requiring reliable, high-frequency connections up to 6 GHz.

1-1532006-1

TE Connectivity

TE Connectivity 1-1532006-1 RF Connector features threaded coupling, 50 ohm impedance, and solder termination. Ideal for panel and cable mounting applications in RF systems requiring female jack connectors.

PL155-32

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Total No. of Contacts: 1; Termination Type: CRIMP;

MM4829-2702RA4

Murata Manufacturing

Murata MM4829-2702RA4 RF connector has 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for commercial applications, it features a gold termination finish and withstands up to 500 cycles with a durability of 90°C max temp.

PL455ACWS-202

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 1; Termination Type: CRIMP; Body or Shell Style: PLUG;

19S101-40ML5-NM

Rosenberger Hochfrequenztechnik & Kg

The RF SMP connector 19S101-40ML5-NM by Rosenberger features a characteristic impedance of 50 ohm, insertion loss of 0.26 dB, and max operating frequency of 26.5 GHz. Ideal for commercial applications, this plug-style connector with liquid crystal polymer insulator is designed for board mounting in high-frequency environments.

142-1000-002

Vertiv

RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: GOLD (50) OVER NICKEL (5); IEC Conformity: NO;

5-1814821-1

TE Connectivity

TE Connectivity 5-1814821-1 RF Connector features SCREW coupling, 75 ohm impedance, and brass shell material. Ideal for commercial applications with a frequency up to 1 GHz. Panel mounted F connector with crimp termination and nickel finish for durability.