Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

PSMP-MSLD-PCS

Manufacturer

Amphenol
Manufacturer's Part Number

PSMP-MSLD-PCS
Description

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: BRASS; Panel Mount: NO; Voltage Standing Wave Ratio: 1.106;
Datasheet

Datasheet

Not In Stock

Popular Products

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

BSS138

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

2N2222A

Gec Plessey Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

EEAGA1H4R7

Panasonic

Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

BAV99

Allegro MicroSystems

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

SS14

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Details

LAN8720AI-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

LL4148

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;

Details

2N7002

Kec

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

LM317T

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;

Details

DS18B20

Maxim Integrated

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

Details

SS14

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;

Details

PSMP-MSLD-PCS Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.106
Panel Mount:	NO
Shell Finish:	GOLD
Termination Type:	SURFACE MOUNT
Maximum Operating Temperature (Cel):	165
Body Length:	.276 inch
Contact Gender:	MALE
Body Diameter:	.315 inch
Connector Type:	RF SMP CONNECTOR
Contact Material:	NOT SPECIFIED
Mounting Style:	STRAIGHT
Other Names:	ARF2464 2266-PSMP-MSLD-PCS
Insertion Loss:	.095 dB
Mounting Type:	BOARD
Body Depth:	.217 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Body Width:	.276 inch
Coupling Type:	SNAP
Termination Contact Finish:	NOT APPLICABLE
Characteristic Impedance:	50 ohm
Insulator Material:	POLYETHERETHERKETONE
Additional Features:	VSWR MAX AT: 6 GHZ
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	10 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK

Category Top Products

U.FL-R-SMT-1(60)

Hirose Electric

U.FL-R-SMT-1(60) by Hirose Electric is a surface mount RF connector with a body length of 0.122 inch, body width of 0.118 inch, and body depth of 0.049 inch. It has a max operating frequency of 6 GHz and is commonly used in commercial applications requiring a characteristic impedance of 50 ohm.

7-1532004-0

TE Connectivity

TE Connectivity 7-1532004-0 is a threaded RF connector with PTFE insulator. It has a VSWR of 1.2, impedance of 50 ohm, and operates up to 2 GHz. Ideal for applications requiring right angle mounting on cables with male contact gender.

1055688-1

Tyco Electronics Amp

RF SSMT CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.4; Body or Shell Style: RECEPTACLE; Insulator Material: POLYPHENYLENE SULFIDE;

D4S24D-400A5-C

Rosenberger Hochfrequenztechnik & Kg

RF CONNECTOR; Manufacturer Series: D4S24D-400A5;

R222900100W

Radiall S A

R222900100W RF SMP connector by Radiall S A features a body diameter of 0.173", insertion loss of 0.42 dB, and insulation resistance of 5000000000 ohm. Ideal for applications requiring a durable, high-frequency connector with a characteristic impedance of 50 ohm, such as in commercial settings up to 12.4 GHz frequency range.

A-1JA

Amphenol

A-1JA RF connector by Amphenol features a body length of 0.102", insulation resistance of 500M ohm, and dielectric voltage withstand of 200VAC. Ideal for board mounting in commercial applications, this male jack connector has a characteristic impedance of 50 ohm and operates up to 6GHz frequency.

SMP-MSLD-PCT-6

Amphenol

SMP-MSLD-PCT-6 by Amphenol is a RF SMP CONNECTOR with 50 ohm impedance, GOLD finish, and 12 GHz frequency. It is used in commercial applications for board mounting with right angle style and male gender contact.

A-1JB

Amphenol

A-1JB RF connector by Amphenol features a body length of 0.102", dielectric voltage of 300VAC, and insulation resistance of 500M ohm. Ideal for commercial applications, this male jack connector has a characteristic impedance of 50 ohm, operates up to 6GHz frequency, and is designed for surface mount termination on boards.

SMP-MSLD-PCR

Amphenol

The Amphenol SMP-MSLD-PCR RF connector features a dielectric voltage of 700VAC, gold termination finish, and liquid crystal polymer insulator. Ideal for applications requiring a 50 ohm characteristic impedance, it operates up to 12 GHz with a VSWR of 1.2. Suitable for commercial use in board-mounted systems, offering durability with 500 mating cycles.

1235

Ntt

RF CONNECTOR; Manufacturer Series: 1235;

7702-13

Winchester Interconnect

Winchester Interconnect's 7702-13 RF Connector features gold contact finish, crimp termination, and 75 ohm impedance. Ideal for panel mounting in applications requiring a straight jack connector with a max operating frequency of 0.5 GHz.

85-1

Amphenol

The Amphenol 85-1 RF Connector features a low insertion loss of 0.8 dB and a voltage standing wave ratio of 1.1, suitable for applications up to 11 GHz. With a snap coupling type and PTFE insulator material, it is designed for use in high-frequency cable connections with a characteristic impedance of 50 ohms. Operating temperatures range from -40°C to 85°C, making it versatile for various environments.

1945-13-5

Winchester Interconnect

RF CONNECTOR; Manufacturer Series: 1945-13-5;

RSP-122811-01

Samtec

Samtec's RSP-122811-01 RF MHF Connector features a 50 ohm characteristic impedance, SNAP coupling type, and 6 GHz max operating frequency. Ideal for board mounting in commercial applications with liquid crystal polymer insulator material and male contact gender.

AFI-J-P-HF-ST-MT1

Samtec

Samtec AFI-J-P-HF-ST-MT1 RF connector features 50 ohm impedance, SNAP coupling, and 6 GHz operating frequency. Ideal for board mounting applications requiring a female jack connector with POLYTETRAFLUOROETHYLENE insulator material.

925-106A-51S

Amphenol

RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

1211-66138

Sv Microwave

1211-66138 RF SMP connector by Sv Microwave features a 0.171" body diameter, 0.25 dB insertion loss, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring high insulation resistance, such as aerospace and telecommunications. Operating temperature range from -65 to 165°C with a max frequency of 18 GHz.

SMP-PL-P-HH-ST-EM3

Samtec

Samtec's SMP-PL-P-HH-ST-EM3 RF connector features threaded coupling, gold contact finish, and 50 ohm impedance. Ideal for applications requiring high-frequency signals up to 40 GHz, such as in board-mounted systems needing reliable solder termination.

1467938-1

TE Connectivity

TE Connectivity's 1467938-1 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for board mounting in applications up to 2 GHz frequency range, with female contact gender and right angle mounting style.

1222255-1

TE Connectivity

RF CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;