Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

PL75C-307

Manufacturer

Vertiv
Manufacturer's Part Number

PL75C-307
Description

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Shell Material: BRASS; Manufacturer Series: PL75C;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Concord Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;

Details

KSZ9031RNXIC

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

Details

2N2222A

Good-ark Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Rectron

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

4554

Jw Miller Magnetics

Other Semiconductors;

Details

LM555CN

Rca Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

LM358M

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

M39029/58-360

Carlisle Interconnect Technologies

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

DS18B20Z+T&R

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

1N4148WS

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS130LT3G

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM317T

Samsung

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;

Details

1N4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

DP83848IVVX/NOPB

Texas Instruments

Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.

Details

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

PL75C-307 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
No. of Ports:	1
Contact Style:	COAX
Sub-Category:	Other RF Connectors
Shell Finish:	NICKEL
Total No. of Contacts:	1
Contact Gender:	FEMALE
Body Diameter:	.593 inch
Connector Type:	RF TRB CONNECTOR
Manufacturer Series:	PL75C
Mounting Option-1:	LOCKING
Maximum Operating Frequency:	.5 GHz
Shell Material:	BRASS
Body or Shell Style:	PLUG
Reliability:	COMMERCIAL

Category Top Products

SF1621-60026-1S

Sv Microwave

SF1621-60026-1S by Sv Microwave is a threaded RF connector with 0.283 dB insertion loss, 50 ohm impedance, and 50 GHz operating frequency. Ideal for panel mount applications in high-frequency environments due to its stainless steel shell, polyetherimide insulator, and surface mount termination.

U.FL-R-SMT-1

Hirose Electric

U.FL-R-SMT-1 by Hirose Electric is a 50 ohm RF connector with 0.05 dB insertion loss and 200VAC dielectric voltage. Ideal for board mounting in commercial applications, it offers a max frequency of 6 GHz and features a right-angle mounting style.

FFA.00.250.CTAC31Z

Lemo Usa

FFA.00.250.CTAC31Z by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz operating frequency. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.

SF1521-60061

Sv Microwave

SF1521-60061 by Sv Microwave is a 50 ohm RF CONNECTOR with gold (Au) - nickel (Ni) finish. It has a max frequency of 40 GHz and features ULTEM insulator material. Ideal for panel mount applications, this threaded connector is designed for high-frequency signal transmission in various electronic systems.

U.FL-R-SMT

Hirose Electric

U.FL-R-SMT by Hirose Electric is a RF connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz frequency. It features liquid crystal polymer insulation, surface mount termination, and silver shell finish. Ideal for board mounting in various electronic devices requiring reliable RF connections.

25-7630

Cinch Connectivity Solutions

RF F CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Insulator Material: POLYPHENYLENE; Body or Shell Style: JACK;

3211-40024

Amphenol

RF SMP CONNECTOR;

SMP-FR-C08-1

Amphenol

RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

73415-5120

Molex

Molex 73415-5120 RF SMP Connector has a max operating frequency of 26.5 GHz with VSWR of 1.5, ideal for cable mounting applications. Features include PTFE insulator, gold shell finish, and beryllium copper shell material for high-quality signal transmission in RF systems.

1211-40087

Sv Microwave

RF SMP CONNECTOR;

19S141-40ML5-NM

Rosenberger Hochfrequenztechnik & Kg

RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

1065-1QD

Winchester Interconnect

RF CONNECTOR; Manufacturer Series: 1065-1QD;

73406-6360

Molex

The Molex 73406-6360 RF SMP Connector features a gold shell finish, PTFE insulator, and Beryllium Copper shell material. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring panel mount with solder termination in straight mounting style.

73387-0020

Molex

Molex 73387-0020 RF connector features threaded coupling, PTFE insulator, 50 ohm impedance, and 50 GHz frequency for board and panel mounting. With a temperature range of -65 to 165°C, it is ideal for high-frequency applications requiring reliable signal transmission in compact spaces.

U.FL-R-SMT(10)

Hirose Electric

U.FL-R-SMT(10) by Hirose Electric is a RF connector with 50 ohm impedance, suitable for applications up to 6 GHz. Featuring gold termination finish and liquid crystal polymer insulator, it offers high durability with 30 cycles. With a compact body size of 0.112" x 0.079" x 0.102", it is ideal for board mounting in commercial settings.

25-7630

Vertiv

RF F CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 75 ohm; Body or Shell Style: JACK; Polarization Key: POLARIZED HOUSING;

119S144-40ML5

Rosenberger Hochfrequenztechnik & Kg

Rosenberger's 119S144-40ML5 RF SMP Connector features 0.09 dB insertion loss, threaded coupling, and gold termination. Ideal for applications up to 10 GHz, it is a male plug with surface mount termination for 50 ohm impedance boards.

BJ77FL

Bel Fuse

BJ77FL RF TRB CONNECTOR by Bel Fuse features a 0.487" body depth, NICKEL shell finish, and BRASS shell material. Ideal for commercial applications up to 0.5 GHz frequency, it offers FEMALE contact gender with SOLDER termination for reliable performance in PANEL mounting setups.

222197

Amphenol

Amphenol 222197 RF connector features gold contact finish, threaded coupling, and PTFE insulator. With a max operating temp of 165°C and min of -65°C, it's ideal for commercial applications up to 2 GHz frequency. This male plug connector has a characteristic impedance of 75 ohm for cable mounting in various RF setups.

73116-0075

Molex

Molex 73116-0075 RF Connector features snap coupling, gold shell finish, and 50 ohm impedance. Ideal for cable mounting with right-angle male contact gender termination. Made of polybutylene terephthalate insulator material and phosphor bronze shell material.