Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

M49142/03-0008

Manufacturer

Winchester Interconnect
Manufacturer's Part Number

M49142/03-0008
Description

RF TRB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; MIL Conformity: YES; Mounting Style: STRAIGHT;
Datasheet

Datasheet

Not In Stock

Popular Products

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

International Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

Details

SMBJ18CA

Daco Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AT90CAN128-16AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;

Details

1N4148WS

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDLL4148

Onsemi

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

Details

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Micro Commercial Components

Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;

Details

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Minilogic Device

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;

Details

BAV99

MICRODIODE ELECTRONICS SHENZHEN CO LTD

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2931AZ-5.0G

Onsemi

LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.

Details

1N4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

1N4148

First Components International

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;

Details

FDV304P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

Details

M49142/03-0008 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Mating Contact Finish:	GOLD
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	CABLE
JESD-609 Code:	e4
MIL Conformity:	YES
Coupling Type:	BAYONET
Termination Contact Finish:	GOLD
Contact Gender:	MALE
Connector Type:	RF TRB CONNECTOR
Option:	GENERAL PURPOSE
Manufacturer Series:	M49142/03-0008
Body or Shell Style:	PLUG
DIN Conformance:	NO

Category Top Products

5-1634540-1

TE Connectivity

TE Connectivity 5-1634540-1 RF Connector features threaded coupling, TPX insulator, and 75 ohm impedance. Ideal for board mounting in applications requiring a right angle jack connector with a max operating frequency of 2 GHz.

82_MMBX-50-0-14/111_NH

Huber+suhner Ag

82_MMBX-50-0-14/111_NH by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.

96_MMPX-50-0-3/111_NM-1

Huber+suhner Ag

96_MMPX-50-0-3/111_NM-1 by Huber+suhner Ag is a SNAP-type RF connector with characteristic impedance of 50 ohm, suitable for applications up to 67 GHz. It features a max operating temperature of 155°C and min of -65°C, making it ideal for high-frequency board mounting with solder termination.

145-0701-601

Bel Fuse

Bel Fuse 145-0701-601 RF Connector features 0.06 dB insertion loss, 1400VAC dielectric voltage, and 50 ohm impedance. Ideal for commercial applications requiring a durable female coaxial jack with gold finish, suitable for panel mounting up to 40 GHz frequency.

119S101-40ML5

Rosenberger Hochfrequenztechnik & Kg

119S101-40ML5 RF connector by Rosenberger features 0.09 dB insertion loss, gold termination contact finish, and SNAP coupling type. With a max operating frequency of 10 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance in high-frequency environments. Suitable for use in boards with surface mount termination.

73415-3592

Molex

Molex 73415-3592 RF SMP Connector features 50 ohm impedance, gold finish, and PTFE insulator. Ideal for applications requiring high-frequency signal transmission up to 40 GHz. Suitable for surface mount board installations with male contact gender in plug style configuration.

GRF7-J-P-04-GF-ST-TH1-E

Samtec

The Samtec GRF7-J-P-04-GF-ST-TH1-E RF connector has a body length of 1.268", operates up to 6 GHz, and features gold over nickel termination. Ideal for board mounting applications requiring a 75 ohm characteristic impedance, this female jack connector is designed with PTFE insulator material for reliable performance in temperatures ranging from -55°C to 125°C.

MM8030-2610RK0

Murata Manufacturing

MM8030-2610RK0 by Murata Manufacturing is a RF CONNECTOR with 0.5 dB Insertion Loss, 1.5 VSWR, and 11 GHz Max Operating Frequency. It is ideal for BOARD mounting in applications requiring a 50 ohm Characteristic Impedance and FEMALE contact gender with SNAP coupling type.

BJ3159AC-201

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: BJ3159; Shell Material: BRASS; Shell Finish: NICKEL;

R222423720

Radiall S A

R222423720 RF connector by Radiall S A features a 0.25" body with SNAP coupling, 50 ohm impedance, and 1.15 VSWR for applications up to 40 GHz. Ideal for surface mount termination on boards, it operates b/w -65°C to 165°C with an insertion loss of 0.76 dB.

MM8130-2600

Murata Manufacturing

MM8130-2600 by Murata Manufacturing is a RF CONNECTOR with SNAP coupling, 50 ohm impedance, and 6 GHz max frequency. It is a FEMALE receptacle for surface mount termination on boards. Operating temperature ranges from -40 to 85 °C, making it ideal for various RF applications.

2-330311-1

TE Connectivity

TE Connectivity 2-330311-1 RF Connector features threaded coupling, fluoropolymer insulator, and brass shell with gold finish. Suitable for RG-174/U cable type, it has a characteristic impedance of 75 ohm. Used in commercial applications with a temperature range of -65 to 85°C.

E6S20A-40MT5-Z

Rosenberger Hochfrequenztechnik & Kg

E6S20A-40MT5-Z by Rosenberger is a RF connector with snap coupling, 100 ohm impedance, and 10 GHz max frequency. It is used for board and panel mounting in applications requiring male plug connectors with tin finish and nickel barrier termination. Operating temperatures range from -40 to 105°C.

MS-147(01)

Hirose Electric

The Hirose Electric MS-147(01) RF connector features a body length of 0.228", insertion loss of 0.8 dB, and dielectric voltage withstand of 100VAC. Ideal for board mounting applications in commercial settings, this female jack connector has a characteristic impedance of 50 ohm and operates up to 6 GHz with gold termination finish.

85305-0232

Molex

Molex 85305-0232 RF SMP Connector features 0.1 dB insertion loss, 50 ohm impedance, and 40 GHz operating frequency. Ideal for board mounting applications requiring high-frequency signal transmission with a male plug connector in a straight mounting style.

3202-6000

Sv Microwave

3202-6000 RF SMPM Connector by Sv Microwave features a 0.156" body diameter and 0.08" body depth, with a max operating frequency of 40 GHz. It has a characteristic impedance of 50 ohm, suitable for panel mount applications in high-frequency environments. The connector is designed with stainless steel shell material and PTFE insulator for durability and reliable performance.

1052098-1

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Body or Shell Style: PLUG; IEC Conformity: NO;

R222900310W

Radiall S A

R222900310W RF SMP connector by Radiall S A features a body length of 0.154", insertion loss of 0.42 dB, and max operating frequency of 12.4 GHz. Ideal for applications requiring a durable, high-frequency connection such as commercial RF systems with characteristic impedance of 50 ohm.

SF1621-60059

Sv Microwave

SF1621-60059 by Sv Microwave is a threaded RF 2.4mm connector with 50 ohm impedance, suitable for board and panel mounting. Featuring a VSWR of 1.25, it operates b/w -65°C to +165°C and supports frequencies up to 50 GHz. Ideal for applications requiring high-frequency signal transmission in harsh environments.

U.FL-R-SMT-1(32)

Hirose Electric

RF CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4;