Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BJ3159AC-201

Manufacturer

Vertiv
Manufacturer's Part Number

BJ3159AC-201
Description

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: BJ3159; Shell Material: BRASS; Shell Finish: NICKEL;
Datasheet

Datasheet

Not In Stock

Popular Products

LM7805CT

Texas Instruments

LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

1N4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Vishay Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;

Details

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

261

Micronetics

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

LM317AEMP/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;

Details

1N4148WT

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DRV5053VAQLPG

Texas Instruments

Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

SS14

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20U

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;

Details

1N4148

Nte Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BJ3159AC-201 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Other Names:	1097-1213 3937-BJ3159AC-201
No. of Ports:	1
Contact Style:	COAX
Sub-Category:	Other RF Connectors
Mounting Type:	CABLE
Shell Finish:	NICKEL
Body Depth:	.59 inch
Total No. of Contacts:	1
Termination Type:	CRIMP
Contact Gender:	FEMALE
Manufacturer Series:	BJ3159
Mounting Option-1:	LOCKING
Maximum Operating Frequency:	.5 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK
Reliability:	COMMERCIAL

Category Top Products

272110

Amphenol

Amphenol 272110 RF connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring male plug connectors with silver finish over copper, suitable for cables with operating temperatures ranging from -65 to 165°C and frequencies up to 75 GHz.

25-7630

Bel Fuse

Bel Fuse 25-7630 is a RF F CONNECTOR with POLYPHENYLENE insulator, BRASS shell, and 75 ohm impedance. Ideal for board mounting in applications requiring 1 GHz frequency operation such as commercial electronics.

861V509ER6

Winchester Interconnect

861V509ER6 by Winchester Interconnect is a threaded RF connector with a max operating temperature of 65°C and a min operating temperature of -40°C. It has a characteristic impedance of 75 ohm and can handle frequencies up to 3 GHz. This connector is commonly used in applications requiring high-frequency signal transmission, such as telecommunications and wireless communication systems.

PL75C-201

Cinch Connectivity Solutions

RF TRB CONNECTOR; IEC Conformity: NO; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; Contact Material: NOT SPECIFIED;

132-0115-0002

Malco Microdot Uk

RF CONNECTOR; Contact Gender: MALE; IEC Conformity: NO; Coupling Type: THREADED; Termination Type: CRIMP SOLDER; MIL Conformity: NO;

CJT-T-P-GF-RA-TH1

Samtec

Samtec's CJT-T-P-GF-RA-TH1 RF connector features gold over nickel termination, snap coupling, and PTFE insulator. Ideal for board mounting applications in RF systems requiring male contact gender with gold-nickel finish for reliable signal transmission.

1056551-1

TE Connectivity

TE Connectivity 1056551-1 RF Connector features 50 ohm impedance, 0.12 dB insertion loss, and 26.5 GHz max frequency. Ideal for commercial applications, it has a durable beryllium copper shell with gold finish and PTFE insulator for high reliability in temperatures ranging from -65 to 165 °C.

R285.001.021

Radiall S A

R285.001.021 by Radiall S A is a SNAP RF CONNECTOR with 50 ohm impedance, suitable for applications up to 6 GHz frequency. It features RIGHT ANGLE mounting style and can operate in temperatures ranging from -40°C to 90°C, making it ideal for various RF connectivity needs.

M-P-10-1

Hirose Electric

Hirose Electric's M-P-10-1 RF Connector is a threaded plug with Tetrafluoride insulator material. It operates at a max frequency of 0.2 GHz, suitable for cable mounting with solder termination. Ideal for applications requiring reliable male connectors in straight mounting style.

302114

Amphenol

Amphenol 302114 RF SMP Connector features gold finish, 50 ohm impedance, and operates up to 26.5 GHz. Ideal for board mounting applications with male contact gender and jack body style. Made of beryllium copper shell material, it withstands temperatures from -65 to 165 °C.

1252294-1

TE Connectivity

The TE Connectivity 1252294-1 RF Connector features a body diameter of 0.177", insulation resistance of 10^10 ohm, and dielectric voltage rating of 1400VAC. Ideal for applications requiring a reliable board and panel mount RF connection with a characteristic impedance of 50 ohm, suitable for frequencies up to 6 GHz in commercial settings.

SMZ6121A6-3GT30G-6-75

Amphenol

Amphenol's SMZ6121A6-3GT30G-6-75 RF Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and 1.2 Voltage Standing Wave Ratio. Ideal for commercial applications with a max operating frequency of 3 GHz, this connector is designed for use in RF systems requiring high reliability and a characteristic impedance of 75 ohm.

SMP-MSLD-PCS

Amphenol

The Amphenol SMP-MSLD-PCS RF connector features a 50 ohm characteristic impedance, gold termination finish, and 18 GHz max operating frequency. Ideal for commercial applications, it offers a durability of 500 cycles with a voltage standing wave ratio of 1.3. Suitable for surface mount board mounting, this connector has a temperature range from -65 to 165 °C.

73415-5740

Molex

Molex 73415-5740 RF SMP Connector features SNAP coupling, PTFE insulator, gold finish, and brass shell. With 50 ohm impedance and 40 GHz frequency, it's ideal for high-frequency applications. Suitable for surface mount board mounting with male contact gender in plug style.

R222.151.000

Radiall S A

R222.151.000 by Radiall S A is an RF SMP connector with a body diameter of 0.189 inch and a max operating frequency of 26.5 GHz. It is commonly used in commercial applications requiring a characteristic impedance of 50 ohm and a durability of 100 cycles.

9311-00038

Sv Microwave

RF SMPM CONNECTOR;

AFI-J-P-HF-ST-MT1

Samtec

Samtec AFI-J-P-HF-ST-MT1 RF connector features 50 ohm impedance, SNAP coupling, and 6 GHz operating frequency. Ideal for board mounting applications requiring a female jack connector with POLYTETRAFLUOROETHYLENE insulator material.

R123415000

Radiall S A

R123415000 RF Connector by Radiall S A features a low insertion loss of 0.25 dB and gold termination contacts. With a 50 ohm impedance, it is ideal for applications requiring high frequency operation up to 18 GHz. This panel mount connector has a snap coupling type and is suitable for use in various RF applications.

MM8130-2600RB8

Murata Manufacturing

MM8130-2600RB8 by Murata Manufacturing is a RF connector with a body length of 0.098 inch, body diameter of 0.083 inch, and insulation resistance of 500000000 ohm. It is commonly used in commercial applications for its durability, withstanding voltage of 450VAC, and max operating frequency of 6 GHz.

MM5829-2700RJ4

Murata Manufacturing

Murata Manufacturing's MM5829-2700RJ4 RF CONNECTOR features SNAP coupling, 1.3 VSWR, and 50 ohm impedance. Ideal for BOARD mounting in applications up to 12 GHz frequency range.