Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
230	$18.040	$4,149.315

73415-3032

Manufacturer

Molex
Manufacturer's Part Number

73415-3032
Description

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .26 inch; Rated Current - Signal: 1.2 A; Minimum Operating Temperature: -65 Cel;
Datasheet

Datasheet

230 In Stock

Popular Products

BSS138BK,215

NXP Semiconductors

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

ST3485EBDR

STMicroelectronics

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

Details

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

Details

BAV99

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

0460-202-16141

TE Connectivity

TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.

Details

2N2222A

Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Micro Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

350766-1

TE Connectivity

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

MBRM140T1G

Onsemi

MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.

Details

1N4148WS

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

Deltrol Controls

Other Relays;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

SMBJ18CA

Dc Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

STMicroelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

73415-3032 Technical Details

TYPE	DESCRIPTION
Mounting Style:	RIGHT ANGLE
Other Names:	73415-3032 734153032 WM9465
Insertion Loss:	.1 dB
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.25
Panel Mount:	NO
Mounting Type:	CABLE
Shell Finish:	GOLD/NICKEL
Body Depth:	.26 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Coupling Type:	SNAP
Maximum Operating Temperature (Cel):	155
Rated Current - Signal:	1.2 A
Contact Gender:	FEMALE
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Connector Type:	RF SMP CONNECTOR
Contact Material:	NOT SPECIFIED
Additional Features:	INSERTION LOSS MAX AT: 1 GHZ, VSWR MAX AT: 18 GHZ
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	40 GHz
Shell Material:	BERYLLIUM COPPER
Body or Shell Style:	JACK

Category Top Products

1086009-1

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Characteristic Impedance: 75 ohm; Insulator Material: POLYPHENYLENE SULFIDE;

GRF7-J-P-08-GF-RA-TH1-E

Samtec

The Samtec GRF7-J-P-08-GF-RA-TH1-E RF connector features a body length of 1.576", dielectric voltage of 700VAC, and operating frequency up to 6 GHz. Ideal for commercial applications, this threaded jack connector has a characteristic impedance of 50 ohm and gold-plated contacts for reliable signal transmission.

90001

Ddk

RF CONNECTOR; IEC Conformity: NO; Body or Shell Style: PLUG; MIL Conformity: NO; Manufacturer Series: Y92; DIN Conformance: NO;

3230

Pomona Electronics

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Panel Mount: NO; Characteristic Impedance: 50 ohm; Coupling Type: BAYONET;

BJ79-32

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 1; Mounting Style: STRAIGHT; Mounting Option-1: LOCKING;

1055689-1

TE Connectivity

The TE Connectivity 1055689-1 RF SSMT Connector features a 0.15 dB insertion loss, 5000000000 ohm insulation resistance, and 6 GHz max operating frequency. Ideal for commercial applications, this male plug connector with a characteristic impedance of 50 ohm is designed for board mounting in straight orientation.

1056550-1

TE Connectivity

TE Connectivity's 1056550-1 RF SMP Connector features an Insulation Resistance of 5G ohm, Insertion Loss of 0.62 dB, and operates up to 26.5 GHz. Ideal for applications requiring a durable, high-frequency RF connector with a characteristic impedance of 50 ohm and a max operating temperature of 165°C.

EZ-1200-78EIA-RA-2

Times Microwave Systems

RF CONNECTOR;

25-7630

Cinch Connectivity Solutions

RF F CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Insulator Material: POLYPHENYLENE; Body or Shell Style: JACK;

BJ770-GL

Bel Fuse

BJ770-GL by Bel Fuse is a RF TRB connector with 0.562" body diameter and 0.487" body depth. It has a nickel shell finish, brass shell material, and solder termination type. Ideal for commercial applications at 0.5 GHz frequency, it features a female contact gender and straight mounting style with locking option.

MS-147(06)

Hirose Electric

MS-147(06) by Hirose Electric is a 50 ohm RF connector with a body length of 0.228 inch and a body width of 0.213 inch. It has an insertion loss of 0.4 dB and can operate at temperatures ranging from -30 to 85 °C. This connector is commonly used in commercial applications requiring reliable, high-frequency connections up to 6 GHz.

1621-60050

Sv Microwave

1621-60050 by Sv Microwave is a RF 2.4mm connector with threaded coupling, suitable for board mounting. Featuring a characteristic impedance of 50 ohm and a max operating frequency of 50 GHz, it is designed for high-frequency applications requiring reliable signal transmission in environments ranging from -65°C to 165°C.

PL75C-307

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Shell Material: BRASS; Manufacturer Series: PL75C;

PL455ACWS-202

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 1; Termination Type: CRIMP; Body or Shell Style: PLUG;

BJ159-47

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1700VAC; Body or Shell Style: JACK; Mounting Style: STRAIGHT;

4710-5007-00

TE Connectivity

TE Connectivity 4710-5007-00 RF Connector features 0.24" body diameter, 50 ohm impedance, and 1.05 VSWR. Ideal for commercial applications with a max frequency of 28 GHz, this panel-mount connector has a TFE insulator and gold shell finish for reliable performance in temperatures ranging from -65 to 105°C.

6802

Ddk

RF CONNECTOR; Body or Shell Style: PLUG; MIL Conformity: NO; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: NC;

90003

Ddk

RF CONNECTOR; IEC Conformity: NO; Manufacturer Series: Y92; Body or Shell Style: PLUG; MIL Conformity: NO; DIN Conformance: NO;

73116-0075

Molex

Molex 73116-0075 RF Connector features snap coupling, gold shell finish, and 50 ohm impedance. Ideal for cable mounting with right-angle male contact gender termination. Made of polybutylene terephthalate insulator material and phosphor bronze shell material.

0734160010

Molex

Molex 0734160010 is a RF 7/16 DIN CONNECTOR with SNAP coupling, suitable for 50 ohm systems up to 7 GHz. It features FEMALE contact gender and JACK body style, designed for PANEL mounting in straight configuration. Ideal for high-frequency applications requiring reliable RF connections.