82_MMBX-50-0-14/111_NE by Huber+suhner Ag

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

82_MMBX-50-0-14/111_NE

Manufacturer

Huber+suhner Ag
Manufacturer's Part Number

82_MMBX-50-0-14/111_NE
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: .232 inch; Mating Contact Finish: NOT SPECIFIED; Mounting Style: STRAIGHT;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

M39029/58-360

Carlisle Interconnect Technologies

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

Details

E8WSDC12-32.768KTR

Ecliptek

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;

Details

BAV99

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

2N2222A

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

SMBJ18CA

World Products

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM358AN

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99+

Multicomp Pro

BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.

Details

M39029/58-360

Tri-star Electronics International

CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;

Details

SS14

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Transpro Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

2N2222A

Comset Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Jiangsu Jiejie Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ECA2DHG4R7

Panasonic

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

Details

82_MMBX-50-0-14/111_NE Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.5
IEC Conformity:	NO
Panel Mount:	NO
MIL Conformity:	NO
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	155
Body Length:	.232 inch
Contact Gender:	FEMALE
Body Diameter:	.327 inch
Connector Type:	RF CONNECTOR
Contact Material:	NOT SPECIFIED
Mounting Style:	STRAIGHT
Filter Feature:	NO
Mounting Type:	BOARD
Body Depth:	.161 inch
Minimum Operating Temperature:	-55 Cel
Total No. of Contacts:	1
Body Width:	.232 inch
Coupling Type:	SNAP
Characteristic Impedance:	50 ohm
Insulator Material:	LIQUID CRYSTAL POLYMER
Additional Features:	VSWR MAX AT 6 GHZ
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	12.4 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK
DIN Conformance:	NO

Category Top Products

292-100J-52S

Amphenol

Amphenol 292-100J-52S is a threaded RF 2.92mm connector with gold shell finish, suitable for panel mounting. It has a max operating frequency of 40GHz, characteristic impedance of 50Ω, and operates b/w -65 to +165°C. Ideal for applications requiring high-frequency signal transmission in demanding environments.

A-1JA

Amphenol

RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 200VAC; Body Depth: .05 inch;

GRF7-J-P-04-GF-RA-TH1-E

Samtec

RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Body Depth: .271 inch;

6802

Ddk

RF CONNECTOR; Body or Shell Style: PLUG; MIL Conformity: NO; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: NC;

RF292A4JAAADAA

Bulgin

OTHER RF CONNECTOR;

GRF1-J-P-08-E-RA-TH1-E

Samtec

The Samtec GRF1-J-P-08-E-RA-TH1-E RF connector has 8 ports, gold-plated contacts, and a dielectric voltage of 700VAC. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring high reliability and operating frequencies up to 6 GHz. The right-angle mounting style with solder termination makes it suitable for board mounting in various electronic devices.

SMZ6121A6-3GT30G-6-75

Amphenol

Amphenol's SMZ6121A6-3GT30G-6-75 RF Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and 1.2 Voltage Standing Wave Ratio. Ideal for commercial applications with a max operating frequency of 3 GHz, this connector is designed for use in RF systems requiring high reliability and a characteristic impedance of 75 ohm.

119S141-40ML5

Rosenberger Hochfrequenztechnik & Kg

Rosenberger's 119S141-40ML5 RF SMP Connector features 0.09 dB insertion loss, SNAP coupling type, and PEEK/PTFE/LCP insulator. Ideal for board mounting in applications up to 10 GHz requiring a 50 ohm characteristic impedance.

1-1532006-1

TE Connectivity

TE Connectivity 1-1532006-1 RF Connector features threaded coupling, 50 ohm impedance, and solder termination. Ideal for panel and cable mounting applications in RF systems requiring female jack connectors.

SF9411-6000

Sv Microwave

OTHER RF CONNECTOR;

73415-5310

Molex

Molex 73415-5310 RF SMP Connector features 50 ohm impedance, gold finish, and 40 GHz frequency for high-performance applications. With solder termination and brass shell material, it is ideal for board mounting in various electronic devices. Operating temperature ranges from -65 to 165°C make it suitable for diverse environments.

MS-162B

Hirose Electric

OTHER RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Voltage Standing Wave Ratio: 1.7; Filter Feature: NO;

925-138J-51P

Amphenol

RF SMPM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;

431-131J-52S

Amphenol

RF CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;

BJ72

Bel Fuse

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Mounting Option-1: LOCKING; Maximum Operating Frequency: .5 GHz;

PL455ACFLS-222

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: CRIMP; No. of Ports: 1; Mounting Type: CABLE;

PRF24-J-C-EP-085-SS

Samtec

Samtec's PRF24-J-C-EP-085-SS RF Connector features a 0.33" body diameter and 0.985" depth, with threaded coupling. Ideal for cable mounting, it has solder clamp termination and female contact gender, suitable for various RF applications.

SMP-MSLD-PCS-T

Amphenol

The Amphenol SMP-MSLD-PCS-T RF connector features a dielectric voltage of 470VAC, operating temperature range of -65 to 165°C, and impedance of 50 ohm. Ideal for commercial applications, this connector is designed for surface mount termination on boards with a max frequency of 18 GHz.

MM5829-2700RJ4

Murata Manufacturing

Murata Manufacturing's MM5829-2700RJ4 RF CONNECTOR features SNAP coupling, 1.3 VSWR, and 50 ohm impedance. Ideal for BOARD mounting in applications up to 12 GHz frequency range.

H.FL-LP-DFS111(01)

Hirose Electric

H.FL-LP-DFS111(01) by Hirose Electric is a 50 ohm RF connector with SNAP coupling, suitable for applications up to 3 GHz. Features include tin contact finish, solder termination, and right angle mounting. Ideal for high-frequency cable connections in various electronic devices.