Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

FLA.00.250.NTAC27

Manufacturer

Lemo Usa
Manufacturer's Part Number

FLA.00.250.NTAC27
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; MIL Conformity: NO; Maximum Operating Frequency: 1.5 GHz;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

Details

BSS138

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

Details

IRLML6401TRPBF

Infineon Technologies

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

New England Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138PS,115

Nexperia

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

Details

M39029/56351

Esterline Technologies

CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;

Details

LM358N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Toshiba

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Eic Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z+T&R

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

LM78L05ACMX/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

2N7002

Unisonic Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;

Details

LM2931Z-5.0RPG

Onsemi

LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

LL4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FLA.00.250.NTAC27 Technical Details

TYPE	DESCRIPTION
Mounting Style:	RIGHT ANGLE
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.25
Filter Feature:	NO
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	CABLE
MIL Conformity:	NO
Coupling Type:	SNAP
Termination Type:	SOLDER
Contact Gender:	MALE
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Connector Type:	RF CONNECTOR
Contact Material:	NOT SPECIFIED
Additional Features:	APPLICABLE CABLES:RG179B/U;RG188A/U, WITH LATCH
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	1.5 GHz
Body or Shell Style:	PLUG
DIN Conformance:	NO

Category Top Products

3-1393670-9

TE Connectivity

3-1393670-9 by TE Connectivity is a RF connector with SCREW coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. It is used in commercial applications up to 10 GHz frequency for high durability and low contact resistance. The right angle mounting style with solder termination makes it suitable for panel installation.

U.FL-R-SMT-1

Hirose Electric

U.FL-R-SMT-1 by Hirose Electric is a 50 ohm RF connector with 0.05 dB insertion loss and 200VAC dielectric voltage. Ideal for board mounting in commercial applications, it offers a max frequency of 6 GHz and features a right-angle mounting style.

2401

Pomona Electronics

Pomona Electronics' 2401 RF Connector features gold termination, bayonet coupling, and beryllium copper contact material. With a characteristic impedance of 50 ohm, it is ideal for solder termination in RF applications requiring female-female-male connectivity.

96_MMPX-50-0-2/111_NM

Huber+suhner Ag

96_MMPX-50-0-2/111_NM RF connector by Huber+suhner Ag features a SNAP coupling type, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm characteristic impedance. Ideal for applications requiring a durable FEMALE JACK connector with a max operating frequency of 65 GHz on BOARD mounting.

3285-6001-TD

Sv Microwave

3285-6001-TD by Sv Microwave is a RF SMPM connector with 50 ohm impedance, gold finish, and right angle mounting. Ideal for applications requiring high frequency up to 40 GHz such as aerospace and defense systems.

222113

Amphenol

Amphenol 222113 RF Connector: 50 ohm impedance, 1 GHz frequency, TIN LEAD finish. Used in RF applications for cables with PLUG body style and CRIMP termination. Operating temp -40 to 85°C.

19S141-40ML5-NM

Rosenberger Hochfrequenztechnik & Kg

RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

27075

Amphenol

RF MHV CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

R285001021

Radiall S A

R285001021 by Radiall S A is a SNAP type RF connector with 50 ohm impedance, suitable for up to 3 GHz frequency. It features a male wire termination and plug body style, ideal for cable mounting applications requiring high-frequency signal transmission.

MS-156C3(20)

Hirose Electric

RF CONNECTOR; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;

81_MMBX-S50-0-1/111_NM

Huber+suhner Ag

81_MMBX-S50-0-1/111_NM by Huber+suhner Ag is a RF MMBX CONNECTOR with SNAP coupling, LCP/PFA insulator, and BRASS shell. It operates b/w -55 to 155 °C, has 1.15 VSWR, and supports up to 12.4 GHz frequency. Ideal for commercial applications requiring durable connectors with 50 ohm impedance for surface mount on boards.

142-1002-0001

Malco Microdot Uk

RF CONNECTOR; Contact Gender: MALE; Body or Shell Style: PLUG; Panel Mount: NO; Mounting Type: CABLE; Manufacturer Series: SLIDE-ON;

GRF1-J-P-08-E-RA-TH1-E

Samtec

The Samtec GRF1-J-P-08-E-RA-TH1-E RF connector has 8 ports, gold-plated contacts, and a dielectric voltage of 700VAC. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring high reliability and operating frequencies up to 6 GHz. The right-angle mounting style with solder termination makes it suitable for board mounting in various electronic devices.

FLA.00.250.NTAC27

Not In Stock

Popular Products

BAV99

BSS138

IRLML6401TRPBF

1N4148WT

2N2222A

BSS138PS,115

M39029/56351

LM358N

1N4148

SMBJ18CA

DS18B20Z+T&R

CRCW04020000Z0ED

BSS138PS,115

LM78L05ACMX/NOPB

1N4148

LM2931AZ-5.0RAG

2N7002

LM2931Z-5.0RPG

ULN2803A

LL4148

FLA.00.250.NTAC27 Technical Details

Category Top Products

3-1393670-9

U.FL-R-SMT-1

2401

96_MMPX-50-0-2/111_NM

3285-6001-TD

222113

19S141-40ML5-NM

27075

R285001021

MS-156C3(20)

81_MMBX-S50-0-1/111_NM

142-1002-0001

GRF1-J-P-08-E-RA-TH1-E

15440

9311-60039-TD

SF4546-6010

73415-5030

619401-1

BJ159-47

141-0003-0001