Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

20566-001E-01

Manufacturer

I-pex
Manufacturer's Part Number

20566-001E-01
Description

RF MHF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Contact Material: BRASS; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
Datasheet

Datasheet

Not In Stock

Popular Products

MBR1560CT

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;

Details

MS3V-T1R32.768KHZ+/-20PPM12.5PF

Golledge Electronics

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

LL4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

BAV99

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

1N4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

1N4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1554216002

Molex

WIRE AND CABLE;

Details

1N4148

Toshiba

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

SS14

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT2907ALT1G

Onsemi

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

Details

LM358N

Taejin Technology

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

20566-001E-01 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Mating Contact Finish:	GOLD OVER NICKEL
Filter Feature:	NO
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	BOARD
JESD-609 Code:	e4
MIL Conformity:	NO
Coupling Type:	SNAP
Termination Type:	SURFACE MOUNT
Termination Contact Finish:	Gold (Au) - with Nickel (Ni) barrier
Contact Gender:	MALE
Connector Type:	RF MHF CONNECTOR
Contact Material:	BRASS
Option:	GENERAL PURPOSE
Body or Shell Style:	RECEPTACLE
DIN Conformance:	NO

Category Top Products

PKG.1B.303.CLLD72

Lemo Usa

PKG.1B.303.CLLD72 by Lemo Usa is a panel mount RF F connector with snap coupling, suitable for cable and panel mounting. It features a polyetheretherketone insulator material, solder termination, and female contact gender. Ideal for applications requiring a straight socket body style in the Other Function RF Connectors category.

82_MMBX-50-0-14/111_NE

Huber+suhner Ag

82_MMBX-50-0-14/111_NE by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.

15440

Corning Gilbert

RF CONNECTOR; Contact Gender: FEMALE; Filter Feature: NO; Additional Features: LOW PROFILE; IEC Conformity: NO; Termination Type: SOLDER;

PL155-47

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Shell Material: BRASS; Maximum Operating Frequency: .5 GHz;

222197

Amphenol

Amphenol 222197 RF connector features gold contact finish, threaded coupling, and PTFE insulator. With a max operating temp of 165°C and min of -65°C, it's ideal for commercial applications up to 2 GHz frequency. This male plug connector has a characteristic impedance of 75 ohm for cable mounting in various RF setups.

1065-1QD

Winchester Interconnect

RF CONNECTOR; Manufacturer Series: 1065-1QD;

1945-13-5

Winchester Interconnect

RF CONNECTOR; Manufacturer Series: 1945-13-5;

PL455ACWS-202

Cinch Connectivity Solutions

PL455ACWS-202 by Cinch Connectivity Solutions is a FEMALE CRIMP RF connector with STRAIGHT mounting style for CABLE termination. Featuring 0.002 GHz frequency, it's ideal for commercial applications requiring reliable COAX connections with LOCKING option.

GRF1-J-P-08-E-ST-TH1-E

Samtec

The Samtec GRF1-J-P-08-E-ST-TH1-E RF Connector has 8 ports, 50 ohm impedance, and operates up to 6 GHz. It is ideal for commercial applications requiring a reliable connector with gold finish contacts and PTFE insulation material. The connector features a straight jack body style with solder termination suitable for board mounting.

19S101-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S101-40ML5 RF SMP connector by Rosenberger features a 0.26 dB insertion loss, 50 ohm impedance, and 26.5 GHz operating frequency. Ideal for commercial applications requiring high durability and reliability with a temperature range of -65 to 155 °C. Suitable for board mounting with male contact gender and gold finish.

U.FL-R-SMT-1(32)

Hirose Electric

RF CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4;

902-9040

Amphenol

Amphenol 902-9040 RF connector features 0.2 dB insertion loss, SNAP coupling type, and 50 ohm impedance. Ideal for applications up to 6 GHz frequency, it is a surface mount female connector suitable for board mounting in straight orientation.

R222.680.000

Radiall S A

Radiall S A R222.680.000 RF Connector features 0.42 dB Insertion Loss, 1.25 VSWR, and 12 GHz Max Operating Frequency. Ideal for board and panel mounting in applications requiring high-frequency signal transmission with a characteristic impedance of 50 ohm.

9311-60039-TD

Sv Microwave

Other RF Connectors;

02K243-40ME3

Rosenberger Hochfrequenztechnik & Kg

02K243-40ME3 RF connector by Rosenberger features a 0.551" body length, 0.63 dB insertion loss, and 50 ohm impedance. Ideal for applications requiring high durability and reliability up to 40 GHz frequency in commercial settings.

SMZ6121A6-3GT30G-6-75

Amphenol

Amphenol's SMZ6121A6-3GT30G-6-75 RF Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and 1.2 Voltage Standing Wave Ratio. Ideal for commercial applications with a max operating frequency of 3 GHz, this connector is designed for use in RF systems requiring high reliability and a characteristic impedance of 75 ohm.

966

Ntt

RF CONNECTOR; Manufacturer Series: 966;

2337019-1

TE Connectivity

TE Connectivity 2337019-1 RF Connector features snap coupling, polyethylene insulator, and gold flash shell finish. With a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for board mounting applications in electronic devices. Operating temperature ranges from -40 to 85°C make it suitable for various environments.

1056551-1

TE Connectivity

TE Connectivity 1056551-1 RF Connector features 50 ohm impedance, 0.12 dB insertion loss, and 26.5 GHz max frequency. Ideal for commercial applications, it has a durable beryllium copper shell with gold finish and PTFE insulator for high reliability in temperatures ranging from -65 to 165 °C.

R222152000W

Radiall S A

R222152000W RF SMP Connector by Radiall S A features a low insertion loss of 0.76 dB, gold termination with nickel barrier, and a max operating frequency of 40 GHz. Ideal for applications requiring high-frequency signal transmission, such as telecommunications and aerospace industries.