Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

90002

Manufacturer

Lapp Group Pvt
Manufacturer's Part Number

90002
Description

RF CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO; Body or Shell Style: JACK; Manufacturer Series: Y92;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

LM317T

Bay Linear

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

Details

SMBJ18CA

Brightking

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Digitron Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

DS18B20U

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

1N4148WS

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56351

Souriau

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;

Details

LAN8720A-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

M39029/58-360

Glenair

CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;

Details

1N4148

Baneasa S A

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBR0520L-T1

Won-top Electronics

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

Details

2N2222A

General Diode

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WS

Synsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

90002 Technical Details

TYPE	DESCRIPTION
MIL Conformity:	NO
IEC Conformity:	NO
Connector Type:	RF CONNECTOR
Manufacturer Series:	Y92
Body or Shell Style:	JACK
DIN Conformance:	NO

Category Top Products

96_MMPX-50-0-3/111_NM-1

Huber+suhner Ag

96_MMPX-50-0-3/111_NM-1 by Huber+suhner Ag is a SNAP-type RF connector with characteristic impedance of 50 ohm, suitable for applications up to 67 GHz. It features a max operating temperature of 155°C and min of -65°C, making it ideal for high-frequency board mounting with solder termination.

U.FL-R-SMT-1(32)

Hirose Electric

RF CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4;

282135-75

Amphenol

RF 1.0/2.3 DIN CONNECTOR; Manufacturer Series: 282135-75;

145-0701-601

Cinch Connectivity Solutions

RF SMK CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (50); Panel Mount: YES; Insertion Loss: .37 dB;

SMP-MSSB-PCS-1

Amphenol

Amphenol's SMP-MSSB-PCS-1 is a 50 ohm RF SMP connector with gold finish, suitable for applications up to 40 GHz. Featuring snap coupling and PTFE insulator, it operates b/w -40°C to 85°C. Ideal for surface mount board mounting, this male plug connector offers low VSWR of 1.5 for high-frequency transmissions.

5-1814822-1

TE Connectivity

TE Connectivity 5-1814822-1 is a RF F CONNECTOR with 75 ohm impedance, 700VAC dielectric voltage, and 50 cycles durability. Ideal for commercial applications at temperatures ranging from -55 to 85 °C, it features a 0.374" body diameter and NICKEL finish.

X.FL-R-SMT-1(80)

Hirose Electric

RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);

FFA.00.250.NTAC31

Lemo Usa

FFA.00.250.NTAC31 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.

R222152000

Radiall S A

The Radiall S A R222152000 RF SMP Connector features a low insertion loss of 0.76 dB and high VSWR of 1.35, suitable for applications up to 40 GHz. With gold-plated contacts and PTFE insulator, it offers reliable performance in temperatures ranging from -65°C to 105°C. Ideal for cable mounting with right-angle style, this connector is commonly used in RF communication systems.

R222.052.000

Radiall S A

Radiall S A R222.052.000 RF Connector features 0.13" body diameter, 0.759 dB insertion loss, and gold (Au) termination with Ni barrier. Ideal for 40 GHz applications with 50 ohm impedance, SNAP coupling, and solder termination for female connectors on cables. Operating range from -65 to 165 °C.

ERN.00.250.CTL

Lemo Usa

ERN.00.250.CTL by Lemo Usa is a panel mount RF F CONNECTOR with 0.315" body diameter and 0.22" body depth. Featuring SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance, it's ideal for applications requiring a max operating frequency of 1.5 GHz.

R222052000W

Radiall S A

The Radiall S A R222052000W RF SMP Connector has a body diameter of 0.09", insertion loss of 0.76 dB, and operates up to 40 GHz. With gold termination contact finish, it is ideal for high-frequency applications requiring a 50 ohm characteristic impedance. The connector features a straight mounting style and female contact gender for cable installations.

7708-14

Winchester Interconnect

Winchester Interconnect's 7708-14 RF Connector features gold termination, snap coupling, and PTFE insulator. Ideal for 0.5 GHz applications with 75 ohm impedance, male contact gender, and crimp termination on cable mounting.

82_MMBX-50-0-14/111_NH

Huber+suhner Ag

82_MMBX-50-0-14/111_NH by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.

20449-001E-03

I-pex

20449-001E-03 by I-pex is a SNAP RF MHF CONNECTOR for BOARD mounting with SURFACE MOUNT termination. It features MALE contact gender, RECEPTACLE body style, and STRAIGHT mounting style. Ideal for applications requiring reliable RF connections in compact electronic devices.

BJ79TL-7

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Mounting Style: STRAIGHT; Shell Finish: NICKEL;

73415-5120

Molex

Molex 73415-5120 RF SMP Connector has a max operating frequency of 26.5 GHz with VSWR of 1.5, ideal for cable mounting applications. Features include PTFE insulator, gold shell finish, and beryllium copper shell material for high-quality signal transmission in RF systems.

90002

Not In Stock

Popular Products

BSS138

LM317T

SMBJ18CA

SMBJ18CA

LM358N

2N2222A

SS495ASP

BSS138

DS18B20U

BSS138LT1G

1N4148WS

M39029/56351

LAN8720A-CP-TR

M39029/58-360

1N4148

MBR0520L-T1

2N2222A

2N2222A

1N4148WS

1N4148WT

90002 Technical Details

Category Top Products

96_MMPX-50-0-3/111_NM-1

U.FL-R-SMT-1(32)

282135-75

145-0701-601

SMP-MSSB-PCS-1

5-1814822-1

X.FL-R-SMT-1(80)

FFA.00.250.NTAC31

R222152000

R222.052.000

ERN.00.250.CTL

R222052000W

7708-14

82_MMBX-50-0-14/111_NH

20449-001E-03

BJ79TL-7

73415-5120

SMP-MSLD-PCS18T

PL11-3

920-185J-51A