Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BJ77FL

Manufacturer

Bel Fuse
Manufacturer's Part Number

BJ77FL
Description

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Depth: .487 inch; Shell Finish: NICKEL; Body or Shell Style: JACK;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

ROHM

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FDN5618P

Onsemi

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

DS18B20Z+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;

Details

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

Details

1N4148WT

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Fairchild Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Vishay Sprague

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

LM358M

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

LM555CN

Rochester Electronics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;

Details

2N2222A

Bytesonic Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;

Details

1N4148

Gulf Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

General Diode

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;

Details

SMBJ18CA

Secos

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BJ77FL Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
No. of Ports:	1
Contact Style:	COAX
Sub-Category:	Other RF Connectors
Mounting Type:	PANEL
Shell Finish:	NICKEL
Body Depth:	.487 inch
Total No. of Contacts:	1
Termination Type:	SOLDER
Contact Gender:	FEMALE
Connector Type:	RF TRB CONNECTOR
Mounting Option-1:	LOCKING
Maximum Operating Frequency:	.5 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK
Reliability:	COMMERCIAL

Category Top Products

MS-162B(02)

Hirose Electric

Other RF Connectors; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);

925-137J-51P

Amphenol

RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

CX020L2HN

TE Connectivity

TE Connectivity's CX020L2HN RF Connector features a screw coupling type, PTFE insulator material, and 50 ohm characteristic impedance. Ideal for applications requiring a max operating frequency of 60 GHz, such as board-mounted RF connections in electronic devices.

1055692-1

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Voltage Standing Wave Ratio: 1.4; Panel Mount: NO;

EHP.3T.675.CTL

Lemo Usa

EHP.3T.675.CTL by Lemo Usa is a threaded RF F connector with 75 ohm impedance and 1.2 GHz frequency, ideal for cable mounting applications. Featuring PTFE insulator material, solder termination, and male contact gender, it ensures low VSWR of 1.2 for high-quality signal transmission in various RF setups.

GRF1-J-P-04-E-RA-TH1

Samtec

Samtec's GRF1-J-P-04-E-RA-TH1 RF Connector features threaded coupling, gold over nickel termination, and PTFE insulator. With 50 ohm impedance and 6 GHz frequency, it suits board mounting applications requiring female contact gender in right angle configuration.

82_MMBX-S50-0-13/111_NM

Huber+suhner Ag

82_MMBX-S50-0-13/111_NM RF connector by Huber+suhner Ag features a body length of 0.232", gold termination finish, and a max operating frequency of 12.4 GHz. It is designed for applications requiring a 50 ohm characteristic impedance, such as high-frequency communication systems or test equipment setups.

1065-1RQD

Winchester Interconnect

1065-1RQD by Winchester Interconnect is a male coax plug RF connector with brass shell, nickel over copper finish, and polyethylene insulator. It features crimp termination for cable mounting and locking option-1 for reliability in commercial applications.

20279-001E-01

I-pex

I-pex 20279-001E-01 RF Connector features GOLD OVER NICKEL termination, SNAP coupling, and LIQUID CRYSTAL POLYMER insulator. Ideal for board mounting in applications requiring high-quality male connectors with COPPER ALLOY contacts.

282122-75

Amphenol

Amphenol 282122-75 is a PLUG RF Connector with 0.836" Body Depth, POLYTETRAFLUOROETHYLENE Insulator, and NICKEL Shell Finish. It is used in commercial applications for COAX connections requiring LOCKING mounting in STRAIGHT orientation.

SMP-PL-P-HH-ST-EM3

Samtec

Samtec's SMP-PL-P-HH-ST-EM3 RF connector features threaded coupling, gold contact finish, and 50 ohm impedance. Ideal for applications requiring high-frequency signals up to 40 GHz, such as in board-mounted systems needing reliable solder termination.

431-130J-52S

Amphenol

RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

331-0472-260

Hirose Electric

OTHER RF CONNECTOR;

142-1000-003

Vertiv

RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; MIL Conformity: NO; Characteristic Impedance: 50 ohm; Panel Mount: NO;

11_QMA-50-2-1/133_NH

Huber+suhner Ag

11_QMA-50-2-1/133_NH by Huber+suhner Ag is a RF CONNECTOR with SNAP coupling, suitable for cables with 0.413" diameter. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it's ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85°C.

966

Ntt

RF CONNECTOR; Manufacturer Series: 966;

19S141-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S141-40ML5 by Rosenberger is a RF SMP connector with 0.17 dB insertion loss and 1.2 VSWR, ideal for applications up to 26.5 GHz. Featuring gold termination finish, liquid crystal polymer insulator, and brass contact material, it offers reliable performance in board-mounted setups requiring a 50 ohm characteristic impedance.

BJ77FL

Not In Stock

Popular Products

1N4148

FDN5618P

1N4148WT

LM358DR2G

DS18B20Z+

CRCW040210K0FKED

1N4148WT

1N4148WT

2N2222A

LL4148

LL4148

BAV99

BSS138BKW,115

ULN2803A

LM358M

LM555CN

2N2222A

1N4148

1N4148

SMBJ18CA

BJ77FL Technical Details

Category Top Products

MS-162B(02)

925-137J-51P

CX020L2HN

1055692-1

EHP.3T.675.CTL

GRF1-J-P-04-E-RA-TH1

82_MMBX-S50-0-13/111_NM

1065-1RQD

20279-001E-01

282122-75

SMP-PL-P-HH-ST-EM3

431-130J-52S

331-0472-260

142-1000-003

11_QMA-50-2-1/133_NH

966

19S141-40ML5

PL11-3

EZ-1200-78EIA-RA-2

1086009-1