Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

925-123C-51A

Manufacturer

Amphenol
Manufacturer's Part Number

925-123C-51A
Description

RF SMPM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

M/a-com Technology Solutions

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;

Details

LM317LMX/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;

Details

LM78L05ACMX/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99+

Multicomp Pro

BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.

Details

M24308/2-1F

Esterline Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RK73H2ATTD10R0F

Koa Speer Electronics

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

Details

2N2222A

Continental Device India

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Crimson Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Vishay Sprague

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

PAP-06V-S

J S T Mfg

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

Details

M39029/58-360

TE Connectivity

TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Philips Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

925-123C-51A Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Connector Type:	RF SMPM CONNECTOR
Contact Material:	NOT SPECIFIED

Category Top Products

SMP-MSLD-PCS18T

Amphenol

RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

73415-5032

Molex

Molex 73415-5032 RF SMP Connector has a characteristic impedance of 50Ω, operates up to 26.5 GHz, and features a right-angle mounting style. It is used for applications requiring high-frequency signal transmission in RF systems with cable assemblies.

U.FL-R-SMT-1(40)

Hirose Electric

U.FL-R-SMT-1(40) by Hirose Electric is a 50 ohm RF connector with 0.05 dB insertion loss, suitable for applications up to 6 GHz. Featuring a dielectric voltage of 200VAC and insulation resistance of 500MΩ, it is ideal for board mounting in commercial settings. With a durability of 30 cycles and surface mount termination, this connector offers reliable performance in various electronic devices.

1058574-1

TE Connectivity

TE Connectivity's 1058574-1 RF Connector features a 0.25" body diameter, 0.39" body depth, and 0.13 dB insertion loss. With a max operating frequency of 18 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and panel mounting in high-frequency environments.

73387-0020

Molex

Molex 73387-0020 RF connector features threaded coupling, PTFE insulator, 50 ohm impedance, and 50 GHz frequency for board and panel mounting. With a temperature range of -65 to 165°C, it is ideal for high-frequency applications requiring reliable signal transmission in compact spaces.

82_MMBX-50-0-14/111_NH

Huber+suhner Ag

82_MMBX-50-0-14/111_NH by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.

SMP-PL-P-HH-ST-EM3

Samtec

Samtec's SMP-PL-P-HH-ST-EM3 RF connector features threaded coupling, gold contact finish, and 50 ohm impedance. Ideal for applications requiring high-frequency signals up to 40 GHz, such as in board-mounted systems needing reliable solder termination.

73415-3032

Molex

Molex 73415-3032 RF SMP Connector features 0.1 dB insertion loss, 50 ohm impedance, and 40 GHz max operating frequency. Ideal for high-frequency signal transmission in applications requiring a right-angle jack connector with snap coupling type and PTFE insulator material.

R222900100W

Radiall S A

R222900100W RF SMP connector by Radiall S A features a body diameter of 0.173", insertion loss of 0.42 dB, and insulation resistance of 5000000000 ohm. Ideal for applications requiring a durable, high-frequency connector with a characteristic impedance of 50 ohm, such as in commercial settings up to 12.4 GHz frequency range.

R222.900.310

Radiall S A

R222.900.310 RF SMP Connector by Radiall S A features a body length of 0.154", insertion loss of 0.42 dB, and dielectric voltage of 750VAC. Ideal for applications requiring a durable right-angle plug with a characteristic impedance of 50 ohm, suitable for RG-196 cable termination at frequencies up to 12.4 GHz.

MM8130-2600RB8

Murata Manufacturing

MM8130-2600RB8 by Murata Manufacturing is a RF connector with a body length of 0.098 inch, body diameter of 0.083 inch, and insulation resistance of 500000000 ohm. It is commonly used in commercial applications for its durability, withstanding voltage of 450VAC, and max operating frequency of 6 GHz.

MS-180(20)

Hirose Electric

The Hirose Electric MS-180(20) RF Connector features a 0.3 dB insertion loss, 11 GHz max operating frequency, and 1.4 VSWR. Ideal for board mounting applications in electronics with a temperature range of -40 to 85°C. This female connector has a straight receptacle design with liquid crystal polymer insulator material.

1052098-1

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Body or Shell Style: PLUG; IEC Conformity: NO;

GRF1-J-P-06-E-ST-TH1-E

Samtec

The Samtec GRF1-J-P-06-E-ST-TH1-E RF Connector has 6 ports, 50 ohm impedance, and operates up to 6 GHz. With gold finish contacts and PTFE insulator, it is ideal for commercial applications requiring high reliability in temperatures ranging from -40°C to 90°C. The connector features a straight jack body style with solder termination for board mounting.

20279-001E-03

I-pex

The I-pex 20279-001E-03 is a RF MHF connector with a body length of 0.102", body diameter of 0.079", and max operating frequency of 9 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm, such as wireless communication systems.

CBJR70/A

Vertiv

CBJR70/A by Vertiv is a right angle RF connector with a body diameter of 0.38" and shell material made of brass. It features female contact gender, solder termination type, and operates at a max frequency of 0.5 GHz. Ideal for commercial applications requiring reliable coaxial connections on circuit boards.

5-1814822-1

TE Connectivity

TE Connectivity 5-1814822-1 is a RF F CONNECTOR with 75 ohm impedance, 700VAC dielectric voltage, and 50 cycles durability. Ideal for commercial applications at temperatures ranging from -55 to 85 °C, it features a 0.374" body diameter and NICKEL finish.

19S104-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S104-40ML5 by Rosenberger Hochfrequenztechnik & Kg is an RF SMP CONNECTOR with a max operating frequency of 26.5 GHz and insertion loss of 0.17 dB. It features a SNAP coupling type, MIL conformity, and liquid crystal polymer insulator material. Ideal for high-frequency applications requiring reliable signal transmission in electronic systems.

1045621-1

TE Connectivity

TE Connectivity 1045621-1 is a threaded RF SSMA connector with PTFE insulator, 50 ohm impedance, and 18 GHz frequency. Ideal for commercial applications requiring a female jack connector with right-angle mounting and solder termination. Operating temperature range from -65 to 165°C makes it versatile for various environments.

73415-5300

Molex

Molex 73415-5300 RF SMP Connector has a characteristic impedance of 50 ohm, operates up to 40 GHz, and features a gold shell finish. Ideal for high-frequency applications requiring surface mount termination on boards due to its female contact gender and straight mounting style.