Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SMP-PL-P-HG-ST-TH2

Manufacturer

Samtec
Manufacturer's Part Number

SMP-PL-P-HG-ST-TH2
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Maximum Operating Frequency: 40 GHz; Body or Shell Style: PLUG; Mounting Type: BOARD;
Datasheet

Datasheet

Not In Stock

Popular Products

STM32H753BIT6

STMicroelectronics

STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.

Details

LM555CN

Intersil

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

LM358N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

SMBJ18CA

Taiwan Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0402JR-070RL

Yageo

Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM78L05ACMX/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

1N4148

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;

Details

SMMBT2222ALT1G

Onsemi

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Compensated Devices

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Details

1N4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

LM317T

Analog Devices

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;

Details

1N4148

Crimson Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMP-PL-P-HG-ST-TH2 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.5
Filter Feature:	NO
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	BOARD
JESD-609 Code:	e4
MIL Conformity:	NO
Coupling Type:	THREADED
Termination Type:	SOLDER
Termination Contact Finish:	GOLD OVER NICKEL
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Connector Type:	RF CONNECTOR
Contact Material:	NOT SPECIFIED
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	40 GHz
Body or Shell Style:	PLUG
DIN Conformance:	NO

Category Top Products

SF1621-60059

Sv Microwave

SF1621-60059 by Sv Microwave is a threaded RF 2.4mm connector with 50 ohm impedance, suitable for board and panel mounting. Featuring a VSWR of 1.25, it operates b/w -65°C to +165°C and supports frequencies up to 50 GHz. Ideal for applications requiring high-frequency signal transmission in harsh environments.

73415-5032

Molex

Molex 73415-5032 RF SMP Connector has a characteristic impedance of 50Ω, operates up to 26.5 GHz, and features a right-angle mounting style. It is used for applications requiring high-frequency signal transmission in RF systems with cable assemblies.

145-0701-601

Johnson Components

RF SMK CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Maximum Operating Frequency: 40 GHz; Mating Contact Finish: GOLD;

82_MMBX-S50-0-13/111_NE

Huber+suhner Ag

82_MMBX-S50-0-13/111_NE RF connector by Huber+suhner Ag features a SNAP coupling type, 50 ohm impedance, and operates up to 12.4 GHz. Ideal for board mounting applications, this female jack connector has a VSWR of 1.5 and can withstand temperatures from -55 to 155°C.

W.FL-R-SMT-1(10)

Hirose Electric

W.FL-R-SMT-1(10) by Hirose Electric is a RF connector with gold termination, 50 ohm impedance, and 6 GHz operating frequency. Ideal for board mounting applications in electronics, it offers high insulation resistance of 500M ohm and durability of 20 cycles.

SMP-PL-P-HH-ST-EM3

Samtec

Samtec's SMP-PL-P-HH-ST-EM3 RF connector features threaded coupling, gold contact finish, and 50 ohm impedance. Ideal for applications requiring high-frequency signals up to 40 GHz, such as in board-mounted systems needing reliable solder termination.

R222940100W

Radiall S A

R222940100W RF SMP connector by Radiall S A features an insertion loss of 0.12 dB, insulation resistance of 5G ohm, and a max operating frequency of 12.4 GHz. With a durable brass shell and PEEK insulator, it is ideal for high-frequency applications requiring low signal loss and high reliability in commercial settings.

1-1393662-2

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Termination Type: SOLDER; Mounting Style: RIGHT ANGLE;

PL155-47

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Shell Material: BRASS; Maximum Operating Frequency: .5 GHz;

FFA.00.250.NTAC31Z

Lemo Usa

FFA.00.250.NTAC31Z by Lemo Usa is a RF CONNECTOR with SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 1.5 GHz, solder termination, and a voltage standing wave ratio of 1.25.

73415-5120

Molex

Molex 73415-5120 RF SMP Connector has a max operating frequency of 26.5 GHz with VSWR of 1.5, ideal for cable mounting applications. Features include PTFE insulator, gold shell finish, and beryllium copper shell material for high-quality signal transmission in RF systems.

SF3211-6004

Sv Microwave

SF3211-6004 by Sv Microwave is a 50 ohm RF connector with a max operating frequency of 65 GHz. It features a low insertion loss of 0.97 dB and a voltage standing wave ratio of 1.3. This connector is commonly used in high-frequency applications requiring reliable signal transmission.

HRMJ-U.FLP-ST1(40)

Hirose Electric

OTHER RF CONNECTOR; Reliability: COMMERCIAL; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;

A-1JB

Amphenol

A-1JB RF connector by Amphenol features a body length of 0.102", dielectric voltage of 300VAC, and insulation resistance of 500M ohm. Ideal for commercial applications, this male jack connector has a characteristic impedance of 50 ohm, operates up to 6GHz frequency, and is designed for surface mount termination on boards.

2157248-1

TE Connectivity

TE Connectivity's 2157248-1 RF SMPM Connector features a 0.19" body diameter, SNAP coupling type, and POLYTETRAFLUOROETHYLENE insulator. Ideal for applications requiring a 50 ohm characteristic impedance, such as commercial-grade systems operating up to 26 GHz frequency with male contact gender and solder termination.

R222.508.700

Radiall S A

R222.508.700 by Radiall S A is a RF connector with 0.51 dB insertion loss, 1.15 VSWR, and 18 GHz max frequency. It features gold over nickel termination for MIL conformity and uses PTFE insulator material. Ideal for board mounting in applications requiring 50 ohm impedance and male contact gender.

A-4JA

Amphenol

A-4JA by Amphenol is a SNAP RF CONNECTOR with 50 ohm impedance and 1.4 VSWR, suitable for applications up to 6 GHz. It features BOARD mounting and SURFACE MOUNT termination, ideal for high-frequency electronic systems requiring reliable signal transmission.

R222680000

Radiall S A

R222680000 by Radiall S A is an RF SMP CONNECTOR with 50 ohm impedance, 0.42 dB insertion loss, and 12 GHz max frequency. It features a gold (Au) - nickel (Ni) finish, SNAP coupling, and operates b/w -65 to 165 °C. Ideal for board mounting in applications requiring high-frequency signal transmission.

90002

Lapp Group Pvt

RF CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO; Body or Shell Style: JACK; Manufacturer Series: Y92;

1086009-1

TE Connectivity

TE Connectivity's 1086009-1 RF Connector features 0.14 dB Insertion Loss, SNAP Coupling Type, and POLYPHENYLENE SULFIDE Insulator. With a max operating frequency of 6 GHz, it is ideal for board mounting applications requiring a 50 ohm characteristic impedance and female contact gender.