82_MMBX-S50-0-13/111_NE by Huber+suhner Ag

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

82_MMBX-S50-0-13/111_NE

Manufacturer

Huber+suhner Ag
Manufacturer's Part Number

82_MMBX-S50-0-13/111_NE
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Style: STRAIGHT; Panel Mount: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Rochester Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Goodwork Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

STM32F407VGT6

STMicroelectronics

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

Details

MBR0520LT1G

Onsemi

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

Details

BAV99

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20U

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;

Details

2N2222A

Semitronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMMBT3904LT1G

Onsemi

SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.

Details

2N7002-T1-E3

Vishay Intertechnology

Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.

Details

1N4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

New Jersey Semiconductor Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

SMBJ18CA

Vishay Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

LM358N

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM555CM

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

82_MMBX-S50-0-13/111_NE Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.5
IEC Conformity:	NO
Panel Mount:	NO
MIL Conformity:	NO
Termination Type:	SURFACE MOUNT
Maximum Operating Temperature (Cel):	155
Body Length:	.232 inch
Contact Gender:	FEMALE
Body Diameter:	.327 inch
Connector Type:	RF CONNECTOR
Mounting Style:	STRAIGHT
Filter Feature:	NO
Mounting Type:	BOARD
Body Depth:	.161 inch
Minimum Operating Temperature:	-55 Cel
Total No. of Contacts:	1
Body Width:	.232 inch
Coupling Type:	SNAP
Characteristic Impedance:	50 ohm
Insulator Material:	LCP/PTFE/PFA
Additional Features:	VSWR MAX AT 6 GHZ
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	12.4 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK
DIN Conformance:	NO

Category Top Products

73415-3310

Molex

The Molex 73415-3310 RF SMP Connector features a 0.236" body diameter, gold/nickel termination contact finish, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 40 GHz.

90001

Ddk

RF CONNECTOR; IEC Conformity: NO; Body or Shell Style: PLUG; MIL Conformity: NO; Manufacturer Series: Y92; DIN Conformance: NO;

R180415007

Radiall S A

R180415007 RF Connector by Radiall S A features a threaded coupling type, 50 ohm impedance, and max operating frequency of 20 GHz. Ideal for panel mounting applications, this connector has a body length of 0.768", insertion loss of 0.22 dB, and can operate in temperatures ranging from -55 to 125°C.

EZ-1200-78EIA-RA-2

Times Microwave Systems

RF CONNECTOR;

73412-0114

Molex

Molex 73412-0114 RF Connector has a Voltage Standing Wave Ratio of 1.3, SNAP coupling type, and male contact gender. Ideal for surface mount board applications in various electronic devices.

5-1814822-7

TE Connectivity

RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; DIN Conformance: NO; IEC Conformity: NO;

EM30MSD-A(02)

Hirose Electric

OTHER RF CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Silver (Ag);

FAA.1D.694.CNL

Lemo Usa

FAA.1D.694.CNL by Lemo Usa is a panel mount RF connector with snap coupling, polyamide insulator, and solder termination. It features a male contact gender and plug body style for straight mounting applications in the RF field.

A-1JB

Amphenol

A-1JB RF connector by Amphenol features a body length of 0.102", dielectric voltage of 300VAC, and insulation resistance of 500M ohm. Ideal for commercial applications, this male jack connector has a characteristic impedance of 50 ohm, operates up to 6GHz frequency, and is designed for surface mount termination on boards.

131-0140-0001

Malco Microdot Uk

RF CONNECTOR; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO;

SMP-MSLD-PCR

Amphenol

The Amphenol SMP-MSLD-PCR RF connector features a dielectric voltage of 700VAC, gold termination finish, and liquid crystal polymer insulator. Ideal for applications requiring a 50 ohm characteristic impedance, it operates up to 12 GHz with a VSWR of 1.2. Suitable for commercial use in board-mounted systems, offering durability with 500 mating cycles.

FFC.00.250.CTAC31

Lemo Usa

FFC.00.250.CTAC31 by Lemo Usa is a SNAP coupling type RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator material. It has a 50 ohm characteristic impedance and operates up to 1.5 GHz, making it ideal for high-frequency cable connections in various applications.

19S104-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S104-40ML5 by Rosenberger Hochfrequenztechnik & Kg is an RF SMP CONNECTOR with a max operating frequency of 26.5 GHz and insertion loss of 0.17 dB. It features a SNAP coupling type, MIL conformity, and liquid crystal polymer insulator material. Ideal for high-frequency applications requiring reliable signal transmission in electronic systems.

20566-001E-01

I-pex

20566-001E-01 by I-pex is a RF MHF CONNECTOR with SNAP coupling type. It has gold (Au) termination contact finish with nickel (Ni) barrier. This male receptacle connector is suitable for surface mount applications and offers multiple mating parts availability.

920-265J-51P

Amphenol

RF CONNECTOR; Manufacturer Series: 920-265J-51P;

SF1621-60029-1S

Sv Microwave

SF1621-60029-1S by Sv Microwave is a threaded RF connector with 0.283 dB insertion loss, 50 ohm impedance, and 1.28 VSWR. Ideal for board and panel mounting in applications requiring high-frequency signal transmission up to 50 GHz.

1055689-1

TE Connectivity

The TE Connectivity 1055689-1 RF SSMT Connector features a 0.15 dB insertion loss, 5000000000 ohm insulation resistance, and 6 GHz max operating frequency. Ideal for commercial applications, this male plug connector with a characteristic impedance of 50 ohm is designed for board mounting in straight orientation.

R285.001.021

Radiall S A

R285.001.021 by Radiall S A is a SNAP RF CONNECTOR with 50 ohm impedance, suitable for applications up to 6 GHz frequency. It features RIGHT ANGLE mounting style and can operate in temperatures ranging from -40°C to 90°C, making it ideal for various RF connectivity needs.

SF1521-60061

Sv Microwave

SF1521-60061 by Sv Microwave is a 50 ohm RF CONNECTOR with gold (Au) - nickel (Ni) finish. It has a max frequency of 40 GHz and features ULTEM insulator material. Ideal for panel mount applications, this threaded connector is designed for high-frequency signal transmission in various electronic systems.

1063357-1

TE Connectivity

TE Connectivity 1063357-1 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for commercial applications with -65 to 125 °C operating range. Female crimp termination with stainless steel shell for reliable panel mounting.