Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

PLR155ACFL-201

Manufacturer

Vertiv
Manufacturer's Part Number

PLR155ACFL-201
Description

Other RF Connectors; Reliability: COMMERCIAL; Contact Style: COAX; Termination Type: CRIMP; Mounting Type: CABLE; Body or Shell Style: PLUG;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

SMBJ18CA

Shenzhen Socay Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C1206C104M5RACTU

KEMET Corporation

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM555CN

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NE555D

Philips Semiconductors

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

RC0402FR-0710KL

Yageo

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

Details

LM317TG

Texas Instruments

LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.

Details

OHN3020U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

Details

BAV99

Kec

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

M39029/56-351

Glenair

CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;

Details

STM32H743BIT6

STMicroelectronics

STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.

Details

PLR155ACFL-201 Technical Details

TYPE	DESCRIPTION
Mounting Style:	RIGHT ANGLE
Other Names:	1097-1110 PLR155ACFL201
No. of Ports:	1
Contact Style:	COAX
Sub-Category:	Other RF Connectors
Mounting Type:	CABLE
Shell Finish:	NICKEL
Body Depth:	.903 inch
Total No. of Contacts:	1
Termination Type:	CRIMP
Manufacturer Series:	PLR
Mounting Option-1:	LOCKING
Maximum Operating Frequency:	.5 GHz
Shell Material:	BRASS
Body or Shell Style:	PLUG
Reliability:	COMMERCIAL

Category Top Products

82_MMBX-S50-0-3/111_NE

Huber+suhner Ag

82_MMBX-S50-0-3/111_NE RF connector by Huber+suhner Ag features a characteristic impedance of 50 ohm, max operating frequency of 12.4 GHz, and VSWR of 1.5. Ideal for board mounting applications, this female jack connector with snap coupling is designed for high-frequency signal transmission in electronic systems.

3221-40022

Sv Microwave

The SV Microwave 3221-40022 RF Connector features a snap coupling type, gold over nickel termination contact finish, and PTFE insulator material. With a VSWR of 1.3 and max operating frequency of 40 GHz, it is ideal for high-frequency applications requiring a 50 ohm characteristic impedance in cable and panel mounting setups.

R222151000

Radiall S A

The Radiall S A R222151000 RF SMP Connector features a low insertion loss of 0.76 dB and a VSWR of 1.35, suitable for high-frequency applications up to 40 GHz. With gold-plated contacts and PTFE insulator, it offers reliable performance in temperatures ranging from -65°C to 105°C. Ideal for cable mounting with a right-angle style, this connector is designed for use in various RF applications requiring a 50 ohm characteristic impedance.

145-0701-601

Cinch Connectivity Solutions

RF SMK CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (50); Panel Mount: YES; Insertion Loss: .37 dB;

MS-180(20)

Hirose Electric

The Hirose Electric MS-180(20) RF Connector features a 0.3 dB insertion loss, 11 GHz max operating frequency, and 1.4 VSWR. Ideal for board mounting applications in electronics with a temperature range of -40 to 85°C. This female connector has a straight receptacle design with liquid crystal polymer insulator material.

81_MMBX-S50-0-1/111_NE

Huber+suhner Ag

81_MMBX-S50-0-1/111_NE by Huber+suhner Ag is a RF MMBX CONNECTOR with SNAP coupling, LCP/PFA insulator, and 50 ohm impedance. It operates up to 12.4 GHz at -55 to 155 °C, suitable for BOARD mounting in commercial applications requiring durable connectors with low VSWR.

SMP-FR-C07

Amphenol

The Amphenol SMP-FR-C07 is an RF SMP connector with a body diameter of 0.187" and depth of 0.27". Featuring a max operating frequency of 26.5 GHz, it has a VSWR of 1.35 and operates b/w -65°C to 165°C. Ideal for applications requiring a right-angle mounting style, this female socket connector has a characteristic impedance of 50 ohms.

SMP-MSSB-PCS-1

Amphenol

Amphenol's SMP-MSSB-PCS-1 is a 50 ohm RF SMP connector with gold finish, suitable for applications up to 40 GHz. Featuring snap coupling and PTFE insulator, it operates b/w -40°C to 85°C. Ideal for surface mount board mounting, this male plug connector offers low VSWR of 1.5 for high-frequency transmissions.

25-146-1000-92

Winchester Interconnect

RF CONNECTOR;

02K243-40ME3

Rosenberger Hochfrequenztechnik & Kg

02K243-40ME3 RF connector by Rosenberger features a 0.551" body length, 0.63 dB insertion loss, and 50 ohm impedance. Ideal for applications requiring high durability and reliability up to 40 GHz frequency in commercial settings.

1909763-1

TE Connectivity

TE Connectivity 1909763-1 RF Connector has a body size of 0.118" x 0.118" x 0.049", with SNAP coupling, and liquid crystal polymer insulator. It operates b/w -40°C to 90°C, has characteristic impedance of 50 ohm, and supports up to 6 GHz frequency. Ideal for commercial applications requiring reliable board-mounted male coaxial connectors.

TC-400-716FC

Times Microwave Systems

RF 7/16 DIN CONNECTOR;

SF8015-6002

Sv Microwave

SF8015-6002 by Sv Microwave is a threaded RF connector with 0.312" body diameter and 0.375" depth. It operates b/w -55°C to 135°C, has 50 ohm impedance, and supports up to 40 GHz frequency. Ideal for cable mounting applications requiring male plug connectors with VSWR of 1.25 or less.

82_MMBX-50-0-14/111_NE

Huber+suhner Ag

82_MMBX-50-0-14/111_NE by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.

142-1000-002

Vertiv

RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: GOLD (50) OVER NICKEL (5); IEC Conformity: NO;

1-1393662-2

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Termination Type: SOLDER; Mounting Style: RIGHT ANGLE;

R222508700

Radiall S A

The Radiall S A R222508700 RF SMP Connector features a body diameter of 0.164", insertion loss of 0.12 dB, and gold (Au) termination contact finish. With a max operating frequency of 18 GHz, it is ideal for board mounting in applications requiring a durable, 50 ohm coaxial connection with high insulation resistance and low voltage standing wave ratio.

131-8001

Amphenol

Amphenol 131-8001 RF Connector features 0.06 dB insertion loss, 1.49 VSWR, and 50 ohm impedance. Ideal for high-frequency applications up to 50 GHz with SNAP coupling and PTFE insulator in cable installations.

W.FL-R-SMT-1(10)

Hirose Electric

W.FL-R-SMT-1(10) by Hirose Electric is a RF connector with gold termination, 50 ohm impedance, and 6 GHz operating frequency. Ideal for board mounting applications in electronics, it offers high insulation resistance of 500M ohm and durability of 20 cycles.

73415-3030

Molex

Molex 73415-3030 RF SMP Connector features 0.177" body diameter, 0.1 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for applications requiring a durable RF connector with a characteristic impedance of 50 ohm, such as in commercial settings up to 40 GHz frequency.