Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

EPA.00.250.NTN

Manufacturer

Lemo Usa
Manufacturer's Part Number

EPA.00.250.NTN
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.25; Body or Shell Style: RECEPTACLE; Panel Mount: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

SMBJ18CA

Yageo

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

First Components International

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;

Details

SS14

General Instrument

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

1N4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

CRCW04020000Z0EDHP

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

LM317D2TG

Onsemi

LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

LM317T/NOPB

Texas Instruments

LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N2222A

Taitron Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

BAV99

Transys Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EPA.00.250.NTN Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.25
Filter Feature:	NO
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	BOARD
MIL Conformity:	NO
Coupling Type:	SNAP
Termination Type:	SOLDER
Contact Gender:	FEMALE
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Connector Type:	RF CONNECTOR
Contact Material:	NOT SPECIFIED
Additional Features:	WTH LATCH
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	1.5 GHz
Body or Shell Style:	RECEPTACLE
DIN Conformance:	NO

Category Top Products

1056721-1

TE Connectivity

TE Connectivity's 1056721-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring a single port RF connection with straight mounting style.

DIN7A-J-P-GF-RA-BH1

Samtec

Samtec DIN7A-J-P-GF-RA-BH1 is a 75 ohm RF connector with gold finish, right angle mounting, and female contact gender. Ideal for board and panel mounting applications requiring threaded coupling and PTFE insulator material. Body dimensions: 0.276" L x 0.163" D x 0.276" W x 0.76" D.

19S102-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S102-40ML5 RF SMP connector by Rosenberger features 0.63 dB insertion loss, 1.5 VSWR, and operates up to 40 GHz. With MIL conformity, GOLD finish, and SNAP coupling, it is ideal for high-frequency applications requiring a characteristic impedance of 50 ohm.

FFA.00.250.CTAC31Z

Lemo Usa

FFA.00.250.CTAC31Z by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz operating frequency. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.

222141

Amphenol

Amphenol 222141 RF Connector features threaded coupling, polypropylene insulator, and bright tin contact finish. Ideal for board mounting with solder termination, this connector is commonly used in various RF applications.

2391

Pomona Electronics

Pomona Electronics 2391 RF Connector features gold finish, bayonet coupling, and brass contact material. With 50 ohm impedance, it is ideal for solder termination in male-female connections. Suitable for straight mounting applications in various RF devices.

142-1002-0001

Malco Microdot Uk

RF CONNECTOR; Contact Gender: MALE; Body or Shell Style: PLUG; Panel Mount: NO; Mounting Type: CABLE; Manufacturer Series: SLIDE-ON;

SF4546-6010

Sv Microwave

RF CONNECTOR;

R222900310W

Radiall S A

R222900310W RF SMP connector by Radiall S A features a body length of 0.154", insertion loss of 0.42 dB, and max operating frequency of 12.4 GHz. Ideal for applications requiring a durable, high-frequency connection such as commercial RF systems with characteristic impedance of 50 ohm.

2-330311-1

TE Connectivity

TE Connectivity 2-330311-1 RF Connector features threaded coupling, fluoropolymer insulator, and brass shell with gold finish. Suitable for RG-174/U cable type, it has a characteristic impedance of 75 ohm. Used in commercial applications with a temperature range of -65 to 85°C.

BJ72

Bel Fuse

BJ72 RF TRB CONNECTOR by Bel Fuse features a 0.515" body depth, NICKEL shell finish, and 50 ohm characteristic impedance. Ideal for commercial applications up to 0.5 GHz frequency, it offers FEMALE contact gender with SOLDER termination in a STRAIGHT mounting style.

U.FL-R-SMT(10)

Hirose Electric

U.FL-R-SMT(10) by Hirose Electric is a RF connector with 50 ohm impedance, suitable for applications up to 6 GHz. Featuring gold termination finish and liquid crystal polymer insulator, it offers high durability with 30 cycles. With a compact body size of 0.112" x 0.079" x 0.102", it is ideal for board mounting in commercial settings.

19K202-270L5-NM

Rosenberger Hochfrequenztechnik & Kg

RF SMP CONNECTOR;

H.FL-R-SMT(C)(10)

Hirose Electric

H.FL-R-SMT°C(10) by Hirose Electric is a 50 ohm RF connector with gold contact finish, suitable for board mounting. Withstanding voltage of 300VAC, it operates from -40 to 90°C and has an insulation resistance of 500MΩ. Ideal for applications requiring a max frequency of 3GHz, this female coaxial connector offers high durability with a reliability rating of commercial standards.

5-1634552-1

TE Connectivity

TE Connectivity 5-1634552-1 RF Connector features threaded coupling, polymethylpentene insulator, and 75 ohm impedance. Ideal for commercial applications with a frequency up to 2 GHz, operating temperature range of -55 to 85°C, and durability of 50 cycles.

331-0472-260

Hirose Electric

OTHER RF CONNECTOR;

1055692-1

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Voltage Standing Wave Ratio: 1.4; Panel Mount: NO;

431-130J-52S

Amphenol

RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

73415-3591

Molex

The Molex 73415-3591 RF SMP Connector features a body diameter of 0.25", gold termination contact finish, and a max operating frequency of 40 GHz. Ideal for board mounting applications in commercial settings, with durability up to 500 cycles and a characteristic impedance of 50 ohm.

81_MMBX-S50-0-1/111_NE

Huber+suhner Ag

81_MMBX-S50-0-1/111_NE by Huber+suhner Ag is a RF MMBX CONNECTOR with SNAP coupling, LCP/PFA insulator, and 50 ohm impedance. It operates up to 12.4 GHz at -55 to 155 °C, suitable for BOARD mounting in commercial applications requiring durable connectors with low VSWR.