Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1742-6002

Manufacturer

Sv Microwave
Manufacturer's Part Number

1742-6002
Description

RF BMA CONNECTOR; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Style: COAX; Total No. of Contacts: 1; Mounting Option-1: LOCKING;
Datasheet

Datasheet

Not In Stock

Popular Products

IRLML6401TRPBF

Infineon Technologies

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

Details

1N4148

Compensated Devices

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Won-top Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/58-360

Glenair

CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;

Details

1N4148WS

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;

Details

1N4148

Invensys Sensor Systems

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

2N2222A

Raytheon Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LL4148

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Transys Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;

Details

LM358AN

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

MBR1560CT

General Instrument

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

Details

SS14

General Instrument

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

M85049/85-08W02

Amphenol

CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;

Details

1N4148

Microchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1742-6002 Technical Details

TYPE	DESCRIPTION
Voltage Standing Wave Ratio:	1.02
Sub-Category:	Other RF Connectors
Shell Finish:	GOLD
Maximum Operating Temperature (Cel):	125
Contact Gender:	FEMALE
Body Diameter:	.3 inch
Connector Type:	RF BMA CONNECTOR
Mounting Option-1:	LOCKING
Contact Resistance:	2 mohm
Insulation Resistance:	5000000000 ohm
Mounting Style:	STRAIGHT
No. of Ports:	1
Contact Style:	COAX
Durability:	5000 Cycles
Body Depth:	.533 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Minimum Withdrawal Force (N):	6.672
Maximum Insertion Force (N):	13.344
Dielectric Withstanding Voltage (V):	1400VAC
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Maximum Operating Frequency:	18 GHz
Shell Material:	STEEL
Body or Shell Style:	JACK
Cable Types:	SEMI-RIGID

Category Top Products

1055692-1

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Voltage Standing Wave Ratio: 1.4; Panel Mount: NO;

90002

Ddk

RF CONNECTOR; Manufacturer Series: Y92; Body or Shell Style: JACK; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO;

PL75C-307

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Shell Material: BRASS; Manufacturer Series: PL75C;

25-7630

Cinch Connectivity Solutions

RF F CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Insulator Material: POLYPHENYLENE; Body or Shell Style: JACK;

FSNS59U-25

Belden

Belden FSNS59U-25 RF F CONNECTOR has Insertion Loss of -0.2 dB, VSWR of -1.07, and 75 ohm Impedance. It operates b/w -40 to 60 °C and supports up to 1 GHz frequency. Ideal for cable applications requiring threaded coupling in CE standard environments.

CBJR70A

Cinch Connectivity Solutions

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Diameter: .38 inch; Mounting Option-1: LOCKING; Body or Shell Style: JACK;

EPL.00.250.NTN

Lemo Usa

EPL.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting in RF applications requiring FEMALE contact and SOLDER termination.

141-0003-0001

TE Connectivity

TE Connectivity 141-0003-0001 RF Connector has a body diameter of 0.156", gold termination finish, and threaded coupling. With 50 ohm impedance, it's ideal for applications requiring a max frequency of 2 GHz, rated at 3A signal current. Suitable for panel mounting with solder termination in female gender receptacle style.

GRF7-J-P-04-GF-ST-TH1-E

Samtec

The Samtec GRF7-J-P-04-GF-ST-TH1-E RF connector has a body length of 1.268", operates up to 6 GHz, and features gold over nickel termination. Ideal for board mounting applications requiring a 75 ohm characteristic impedance, this female jack connector is designed with PTFE insulator material for reliable performance in temperatures ranging from -55°C to 125°C.

R222052000W

Radiall S A

The Radiall S A R222052000W RF SMP Connector has a body diameter of 0.09", insertion loss of 0.76 dB, and operates up to 40 GHz. With gold termination contact finish, it is ideal for high-frequency applications requiring a 50 ohm characteristic impedance. The connector features a straight mounting style and female contact gender for cable installations.

9311-00038

Sv Microwave

RF SMPM CONNECTOR;

PL3455ACS-303

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE; Body Depth: 1.45 inch; Body or Shell Style: PLUG;

119S101-40ML5

Rosenberger Hochfrequenztechnik & Kg

119S101-40ML5 RF connector by Rosenberger features 0.09 dB insertion loss, gold termination contact finish, and SNAP coupling type. With a max operating frequency of 10 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance in high-frequency environments. Suitable for use in boards with surface mount termination.

222128-10

Amphenol

Amphenol 222128-10 RF Connector features threaded coupling, Delrin/Polypropylene insulator, and tin contact finish. Ideal for board and panel mounting in applications requiring reliable RF connections.

1-1337551-0

TE Connectivity

TE Connectivity 1-1337551-0 RF Connector features 5000000000 ohm Insulation Resistance, 0.2 dB Insertion Loss, and THREADED Coupling Type. Ideal for applications requiring a durable F CONNECTOR with 50 ohm Characteristic Impedance, suitable for RG-174A/U cable types and operating up to 2 GHz frequency.

PLR155ACFL-201

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Style: COAX; Termination Type: CRIMP; Mounting Type: CABLE; Body or Shell Style: PLUG;

96_MMPX-50-0-3/111_NM

Huber+suhner Ag

96_MMPX-50-0-3/111_NM by Huber+suhner Ag is a SNAP coupling type RF connector with characteristic impedance of 50 ohm. It has a max operating frequency of 67 GHz, making it suitable for high-frequency applications. With insulator material made of POLYTETRAFLUOROETHYLENE, this connector can operate in temperatures ranging from -65 to 155 °C.

SF1621-60048-1S

Sv Microwave

SF1621-60048-1S by Sv Microwave is a threaded RF connector with 50 ohm impedance, suitable for panel mount applications. Featuring polyetherimide insulator and stainless steel shell, it operates b/w -65 to 165 °C at frequencies up to 50 GHz. Ideal for board and panel mounting, this female jack connector has a 0.357" body depth.

GRF1-J-P-08-E-ST-TH1-E

Samtec

The Samtec GRF1-J-P-08-E-ST-TH1-E RF Connector has 8 ports, 50 ohm impedance, and operates up to 6 GHz. It is ideal for commercial applications requiring a reliable connector with gold finish contacts and PTFE insulation material. The connector features a straight jack body style with solder termination suitable for board mounting.

73415-5310

Molex

Molex 73415-5310 RF SMP Connector features 50 ohm impedance, gold finish, and 40 GHz frequency for high-performance applications. With solder termination and brass shell material, it is ideal for board mounting in various electronic devices. Operating temperature ranges from -65 to 165°C make it suitable for diverse environments.