Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

925-137J-51P

Manufacturer

Amphenol
Manufacturer's Part Number

925-137J-51P
Description

RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Diodes Incorporated

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Rectron

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

Details

2N2222A

Minilogic Device

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

L7805CV

Sgs-ates Componenti Electronici S P A

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

1N4148

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

LL4148

Excel (Suzhou) Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SN6505BDBVR

Texas Instruments

SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.

Details

LL4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

925-137J-51P Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Termination Contact Finish:	NOT APPLICABLE
Connector Type:	RF SMPM CONNECTOR
Contact Material:	NOT SPECIFIED

Category Top Products

FFA.00.250.CTAC29Z

Lemo Usa

FFA.00.250.CTAC29Z by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.

BJ72

Bel Fuse

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Mounting Option-1: LOCKING; Maximum Operating Frequency: .5 GHz;

SMP-MSLD-PCT-10

Amphenol

RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

SF4546-6011

Sv Microwave

Other RF Connectors;

222197

Amphenol

RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -65 Cel; Shell Material: BRASS;

5-1634540-1

TE Connectivity

TE Connectivity 5-1634540-1 RF Connector features threaded coupling, TPX insulator, and 75 ohm impedance. Ideal for board mounting in applications requiring a right angle jack connector with a max operating frequency of 2 GHz.

619401-1

TE Connectivity

RF CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Maximum Operating Frequency: 5 GHz; Minimum Operating Temperature: -40 Cel; Body Depth: .251 inch;

73300-0110

Molex

Molex 73300-0110 RF SMPM Connector features threaded coupling, 50 ohm impedance, and operates up to 65 GHz. Ideal for board mounting applications requiring male plug connectors with solder termination.

1-1393662-2

TE Connectivity

TE Connectivity 1-1393662-2 RF Connector features 50 ohm impedance, 200M ohm insulation resistance, and 1.22 VSWR. Ideal for board and panel mounting in applications up to 2 GHz frequency, with DIN conformance and solder termination.

GRF1-J-P-04-E-RA-TH1

Samtec

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Termination Type: SOLDER; MIL Conformity: NO;

1065-1QD

Winchester Interconnect

RF CONNECTOR; Manufacturer Series: 1065-1QD;

EPY.00.250.NTN

Lemo Usa

EPY.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting applications. It features FEMALE contact gender, RIGHT ANGLE mount style, and 1.25 VSWR ideal for solder termination in RF systems.

96_MMPX-50-0-2/111_NM

Huber+suhner Ag

RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Coupling Type: SNAP;

119S141-40ML5

Rosenberger Hochfrequenztechnik & Kg

Rosenberger's 119S141-40ML5 RF SMP Connector features 0.09 dB insertion loss, SNAP coupling type, and PEEK/PTFE/LCP insulator. Ideal for board mounting in applications up to 10 GHz requiring a 50 ohm characteristic impedance.

CX020L2HN

TE Connectivity

TE Connectivity's CX020L2HN RF Connector features a screw coupling type, PTFE insulator material, and 50 ohm characteristic impedance. Ideal for applications requiring a max operating frequency of 60 GHz, such as board-mounted RF connections in electronic devices.

SMP-PL-P-HG-ST-TH2

Samtec

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Maximum Operating Frequency: 40 GHz; Body or Shell Style: PLUG; Mounting Type: BOARD;

R222.151.000

Radiall S A

R222.151.000 by Radiall S A is an RF SMP connector with a body diameter of 0.189 inch and a max operating frequency of 26.5 GHz. It is commonly used in commercial applications requiring a characteristic impedance of 50 ohm and a durability of 100 cycles.

MS-156C3(20)

Hirose Electric

RF CONNECTOR; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;

2157248-1

TE Connectivity

TE Connectivity's 2157248-1 RF SMPM Connector features a 0.19" body diameter, SNAP coupling type, and POLYTETRAFLUOROETHYLENE insulator. Ideal for applications requiring a 50 ohm characteristic impedance, such as commercial-grade systems operating up to 26 GHz frequency with male contact gender and solder termination.

R223.435.000

Radiall S A

Radiall S A R223.435.000 RF Connector features 0.42 dB Insertion Loss, SNAP Coupling Type, and LIQUID CRYSTAL POLYMER Insulator Material. Ideal for 12.4 GHz applications with 50 ohm impedance, solder termination, and male contact gender on board mounting in straight style receptacle.