Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

PSMP-MSSB-PCS

Manufacturer

Amphenol
Manufacturer's Part Number

PSMP-MSSB-PCS
Description

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.106; Total No. of Contacts: 1; Mating Contact Finish: NOT SPECIFIED;
Datasheet

Datasheet

Not In Stock

Popular Products

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

LM107H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

LL4148

Continental Device India

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Nexperia

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

2N7002

Plessey Semiconductors Discrete Components Div

Other Transistors;

Details

2N2222A

Central Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;

Details

1N4148WS

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

M85049/85-08W02

Amphenol

CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

M39029/58-360

Positronic Industries

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Details

SMBJ18CA

Thinking Electronic Industrial

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C0603C104K5RACTU

KEMET Corporation

KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

LL4148

Semtech Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MBRS3200T3G

Onsemi

MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.

Details

SMBJ18CA

KYOCERA AVX

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

PSMP-MSSB-PCS Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.106
Panel Mount:	NO
Shell Finish:	GOLD
Termination Type:	SURFACE MOUNT
Maximum Operating Temperature (Cel):	165
Contact Gender:	MALE
Body Diameter:	.354 inch
Connector Type:	RF SMP CONNECTOR
Contact Material:	NOT SPECIFIED
Mounting Style:	STRAIGHT
Other Names:	2266-PSMP-MSSB-PCS ARF2469
Insertion Loss:	.095 dB
Mounting Type:	BOARD
Body Depth:	.246 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Coupling Type:	SNAP
Termination Contact Finish:	NOT APPLICABLE
Characteristic Impedance:	50 ohm
Insulator Material:	POLYETHERETHERKETONE
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	10 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK

Category Top Products

GRF1-J-P-04-E-ST-TH1

Samtec

Samtec's GRF1-J-P-04-E-ST-TH1 RF Connector features threaded coupling, 50 ohm impedance, and a max frequency of 6 GHz. Ideal for board mounting applications requiring a female jack connector with gold over nickel finish for solder termination.

R222052000

Radiall S A

R222052000 RF F CONNECTOR by Radiall S A features a 0.13" body diameter, 0.76 dB insertion loss, and gold (Au) termination with Ni barrier. With a 50 ohm impedance and max operating frequency of 40 GHz, it is ideal for high-frequency applications requiring low signal loss and reliable connections in straight cable installations.

145-0701-601

Cinch Connectivity Solutions

RF SMK CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (50); Panel Mount: YES; Insertion Loss: .37 dB;

MS-156C3(20)

Hirose Electric

RF CONNECTOR; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;

1211-66195-TD

Sv Microwave

RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;

1055689-1

Tyco Electronics Amp

RF SSMT CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; MIL Conformity: NO; Termination Type: SURFACE MOUNT;

SMP-PL-P-HG-ST-TH2

Samtec

SMP-PL-P-HG-ST-TH2 by Samtec is a 50 ohm RF connector with GOLD OVER NICKEL finish. Featuring THREADED coupling, it has a max freq of 40 GHz and VSWR of 1.5. Ideal for high-frequency applications on boards requiring SOLDER termination in STRAIGHT mounting style.

20549-001E

I-pex

20549-001E by I-pex is a SNAP RF CONNECTOR for BOARD mounting with FEMALE contact gender. It features SURFACE MOUNT termination, suitable for various applications in electronics and telecommunications due to its STRAIGHT mounting style.

BJ77FL

Bel Fuse

BJ77FL RF TRB CONNECTOR by Bel Fuse features a 0.487" body depth, NICKEL shell finish, and BRASS shell material. Ideal for commercial applications up to 0.5 GHz frequency, it offers FEMALE contact gender with SOLDER termination for reliable performance in PANEL mounting setups.

81_MMBX-S50-0-1/111_NH

Huber+suhner Ag

81_MMBX-S50-0-1/111_NH by Huber+suhner Ag is a RF MMBX CONNECTOR with characteristic impedance of 50 ohm, operating up to 12.4 GHz. It features SNAP coupling, LCP/PFA insulator, and brass shell material. Ideal for board mounting in commercial applications due to its durability of 100 cycles and temperature range from -55 to 155 °C.

25-146-1000-92

Winchester Interconnect

RF CONNECTOR;

SF3211-6004

Sv Microwave

SF3211-6004 by Sv Microwave is a 50 ohm RF connector with a max operating frequency of 65 GHz. It features a low insertion loss of 0.97 dB and a voltage standing wave ratio of 1.3. This connector is commonly used in high-frequency applications requiring reliable signal transmission.

1340150

Phoenix Contact

RF CONNECTOR;

TC-400-716M-X

Times Microwave Systems

TC-400-716M-X by Times Microwave Systems is an RF 7/16 DIN connector with 0.05 dB insertion loss and 1.3 VSWR, suitable for up to 6 GHz frequency applications. Featuring threaded coupling and PTFE insulator, it has a characteristic impedance of 50 ohm and conforms to IEC standards. Ideal for cable mounting in various RF connectivity setups.

20566-001E-01

I-pex

20566-001E-01 by I-pex is a RF MHF CONNECTOR with SNAP coupling type. It has gold (Au) termination contact finish with nickel (Ni) barrier. This male receptacle connector is suitable for surface mount applications and offers multiple mating parts availability.

90001

Ddk

RF CONNECTOR; IEC Conformity: NO; Body or Shell Style: PLUG; MIL Conformity: NO; Manufacturer Series: Y92; DIN Conformance: NO;

73387-0020

Molex

Molex 73387-0020 RF connector features threaded coupling, PTFE insulator, 50 ohm impedance, and 50 GHz frequency for board and panel mounting. With a temperature range of -65 to 165°C, it is ideal for high-frequency applications requiring reliable signal transmission in compact spaces.

R285.001.021

Radiall S A

R285.001.021 by Radiall S A is a SNAP RF CONNECTOR with 50 ohm impedance, suitable for applications up to 6 GHz frequency. It features RIGHT ANGLE mounting style and can operate in temperatures ranging from -40°C to 90°C, making it ideal for various RF connectivity needs.

9311-60039-TD

Sv Microwave

Other RF Connectors;

85305-0232

Molex

Molex 85305-0232 RF SMP Connector features 0.1 dB insertion loss, 50 ohm impedance, and 40 GHz operating frequency. Ideal for board mounting applications requiring high-frequency signal transmission with a male plug connector in a straight mounting style.