Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ULN2803ADWR

Manufacturer

Texas Instruments
Manufacturer's Part Number

ULN2803ADWR
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

M39029/56-351

Itt Cannon

CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;

Details

2N2222A

Tesla Elektronicke Soucastky

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Minilogic Device

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;

Details

C0603C104K5RACTU

KEMET Corporation

KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

2902037

Phoenix Contact

MODULAR TERMINAL BLOCK;

Details

SMBJ18CA

Db Lectro

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USBLC6-2SC6

STMicroelectronics

USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.

Details

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

Details

DS18B20Z+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;

Details

M39029/56351

Souriau-sunbank Connection Technologies

Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

Inchange Semiconductor

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

Details

1N4148WS

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;

Details

BAT54C-7-F

Diodes Incorporated

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

Details

ULN2803ADWR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Output Characteristics:	OPEN-COLLECTOR
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	2.65 mm
Surface Mount:	YES
Maximum Supply Current:	1.35 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	18
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G18
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.5 mm
Moisture Sensitivity Level (MSL):	2
Driver No. of Bits:	8
Maximum Supply Voltage:	3 V
Minimum Operating Temperature:	-40 Cel
No. of Functions:	8
Package Equivalence Code:	SOP18,.4
Output Current Flow Direction:	SINK
Length:	11.55 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm

Category Top Products

VND5050JTR-E

STMicroelectronics

VND5050JTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used for buffer or inverter-based interface ICs, offering sink output current flow direction. The small outline package with low profile makes it suitable for various applications requiring reliable driving capabilities.

UDN2987LW-6-T

Allegro MicroSystems

Allegro MicroSystems' UDN2987LW-6-T is a 20-terminal peripheral driver with a max supply voltage of 35V. It offers built-in protections for transient, over current, and thermal issues. Ideal for applications requiring a small outline package style and source output current flow direction.

BSP452

Infineon Technologies

BSP452 by Infineon is a MOS technology-based peripheral driver with 4 terminals and built-in protections for over/under voltage. It operates at supply voltages ranging from 5V to 34V, making it suitable for automotive applications requiring a nominal output peak current limit of 0.7A. The small outline package style with gull wing terminal form enables surface mount installation in compact spaces.

VNQ7140AJ-E

STMicroelectronics

STMicroelectronics' VNQ7140AJ-E is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w 4V to 28V, with turn-on time of 120us and turn-off time of 100us. Ideal for applications requiring sink output current flow direction in compact spaces.

VNI4140K

STMicroelectronics

VNI4140K by STMicroelectronics is a 24V peripheral driver with 4 functions, built-in protections, and 1.3A output current limit. It comes in a small outline package with gull wing terminals for sink flow direction applications. Ideal for driving various peripherals in electronic systems requiring reliable protection and control features.

IRS2101SPBF

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MIC5841YWM

Micrel

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;

EL7156CSZ-T7A

Intersil

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

BTS72004EPAXUMA1

Infineon Technologies

BTS72004EPAXUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 18V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This compact driver, with dimensions of 4.9mm x 3.9mm x 1.15mm, is suitable for applications requiring true output polarity and a max output current of 0.004A.

IRS2011STRPBF

Infineon Technologies

IRS2011STRPBF by Infineon is a Peripheral Driver with 8 terminals, operating voltage range of 10-20V. It offers built-in transient and under voltage protections, suitable for automotive applications. This CMOS technology-based driver has a turn-on/off time of 0.08us and can sink output current.

FDC6331L

Onsemi

FDC6331L by Onsemi is a small outline, low profile peripheral driver with 6 terminals. It operates at a nominal voltage of 6.4V and has built-in transient protections. With a max output peak current limit of 9A, it is ideal for half bridge based applications requiring source and sink current flow control.

AUIPS7081RTRL

Infineon Technologies

AUIPS7081RTRL by Infineon Technologies is a peripheral driver with 35V max supply voltage, 2.3A max output current, and AEC-Q100 screening level. It offers built-in protections for transient, over current, and thermal issues. Ideal for automotive applications requiring reliable power supplies in a compact package style.

VN920SP-E

STMicroelectronics

VN920SP-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and a max output current of 30A. It is used as a buffer or inverter based peripheral driver, providing protection against transient, over current, over voltage, thermal, and under voltage conditions.

BTS6143DAUMA1

Infineon Technologies

BTS6143DAUMA1 by Infineon: MOS tech, 38V max supply, 8A peak current limit. Applicable for buffer/inverter-based peripheral driver interface ICs. Features built-in protections against transient, over/under voltage & current, thermal issues.

VND830SPTR-E

STMicroelectronics

VND830SPTR-E by STMicroelectronics is a peripheral driver with 2 functions, 6A max output current, and built-in protections. It operates on power supplies ranging from 8V to 36V and is ideal for buffer or inverter-based interface IC applications requiring source flow direction.

VNS3NV04DPTR-E

STMicroelectronics

VNS3NV04DPTR-E by STMicroelectronics is a peripheral driver with 2 functions, built-in thermal and overvoltage protections. It has 8 terminals, GULL WING form, and can handle a peak current limit of 5A. Ideal for applications requiring sink output flow direction and fast turn-on time of 1.35us.

L293DWPG4

Texas Instruments

L293DWPG4 by Texas Instruments is a peripheral driver with a max supply voltage of 7V. It has 2 functions and built-in protections for transient and thermal issues. This IC type is commonly used as a half bridge-based peripheral driver for various applications.

BSP742T

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;

BTS428L2

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Qualification: Not Qualified;

BSP78

Infineon Technologies

BSP78 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12V nominal voltage with a peak output current limit of 24A. This rectangular package style IC is ideal for automotive applications requiring fast turn-on/off times and sink output current flow direction.