Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

H.FL-LP-DFS111(01)

Manufacturer

Hirose Electric
Manufacturer's Part Number

H.FL-LP-DFS111(01)
Description

OTHER RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; MIL Conformity: NO; Panel Mount: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

ERJ3EKF1002V

Panasonic

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

Details

NE555D

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

Microsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z/T&R

Maxim Integrated

DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.

Details

LL4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

2N7002-7-F

Diodes Incorporated

Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.

Details

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

MMBF170LT1G

Rochester Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;

Details

EEAGA1H4R7

Panasonic

Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.

Details

08055C104KAT4A

KYOCERA AVX

08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.

Details

LD1117S33TR

STMicroelectronics

LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.

Details

SMBJ18CA

Eic Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

First Components International

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;

Details

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

ROHM

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

BAV99

Plessey Semiconductors Discrete Components Div

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

H.FL-LP-DFS111(01) Technical Details

TYPE	DESCRIPTION
Mounting Style:	RIGHT ANGLE
Mating Contact Finish:	TIN
Voltage Standing Wave Ratio:	1.3
Filter Feature:	NO
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	CABLE
JESD-609 Code:	e3
MIL Conformity:	NO
Coupling Type:	SNAP
Termination Type:	SOLDER
Termination Contact Finish:	Tin (Sn)
Contact Gender:	MALE
Characteristic Impedance:	50 ohm
Insulator Material:	POLYBUTYLENE TEREPHTHALATE
Connector Type:	OTHER RF CONNECTOR
Contact Material:	COPPER ALLOY
Additional Features:	LOW PROFILE
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	3 GHz
Body or Shell Style:	PLUG
DIN Conformance:	NO

Category Top Products

3221-40022

Sv Microwave

The SV Microwave 3221-40022 RF Connector features a snap coupling type, gold over nickel termination contact finish, and PTFE insulator material. With a VSWR of 1.3 and max operating frequency of 40 GHz, it is ideal for high-frequency applications requiring a 50 ohm characteristic impedance in cable and panel mounting setups.

73415-3032

Molex

Molex 73415-3032 RF SMP Connector features 0.1 dB insertion loss, 50 ohm impedance, and 40 GHz max operating frequency. Ideal for high-frequency signal transmission in applications requiring a right-angle jack connector with snap coupling type and PTFE insulator material.

73406-6360

Molex

The Molex 73406-6360 RF SMP Connector features a gold shell finish, PTFE insulator, and Beryllium Copper shell material. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring panel mount with solder termination in straight mounting style.

BJ79TL-7

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Mounting Style: STRAIGHT; Shell Finish: NICKEL;

9311-00038

Sv Microwave

RF SMPM CONNECTOR;

19S144-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S144-40ML5 RF connector by Rosenberger features a body length, diameter, and width of 0.236 inch each. With an insertion loss of 0.51 dB, it offers a max operating frequency of 26.5 GHz. Ideal for board mounting applications in high-frequency environments with a characteristic impedance of 50 ohm.

1075-1

Winchester Interconnect

1075-1 by Winchester Interconnect is a RF CONNECTOR with GOLD finish, suitable for 50 ohm systems. It features CRIMP termination and PLUG body style, ideal for CABLE mounting applications in Other Function RF Connectors category.

272110

Amphenol

Amphenol 272110 RF connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring male plug connectors with silver finish over copper, suitable for cables with operating temperatures ranging from -65 to 165°C and frequencies up to 75 GHz.

EPY.00.250.NTN

Lemo Usa

EPY.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting applications. It features FEMALE contact gender, RIGHT ANGLE mount style, and 1.25 VSWR ideal for solder termination in RF systems.

131-0140-0001

Malco Microdot Uk

RF CONNECTOR; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO;

SMP-MSSB-PCS-1

Amphenol

Amphenol's SMP-MSSB-PCS-1 is a 50 ohm RF SMP connector with gold finish, suitable for applications up to 40 GHz. Featuring snap coupling and PTFE insulator, it operates b/w -40°C to 85°C. Ideal for surface mount board mounting, this male plug connector offers low VSWR of 1.5 for high-frequency transmissions.

19S101-40ML5-NM

Rosenberger Hochfrequenztechnik & Kg

The RF SMP connector 19S101-40ML5-NM by Rosenberger features a characteristic impedance of 50 ohm, insertion loss of 0.26 dB, and max operating frequency of 26.5 GHz. Ideal for commercial applications, this plug-style connector with liquid crystal polymer insulator is designed for board mounting in high-frequency environments.

MS-180(20)

Hirose Electric

The Hirose Electric MS-180(20) RF Connector features a 0.3 dB insertion loss, 11 GHz max operating frequency, and 1.4 VSWR. Ideal for board mounting applications in electronics with a temperature range of -40 to 85°C. This female connector has a straight receptacle design with liquid crystal polymer insulator material.

1211-66138

Sv Microwave

1211-66138 RF SMP connector by Sv Microwave features a 0.171" body diameter, 0.25 dB insertion loss, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring high insulation resistance, such as aerospace and telecommunications. Operating temperature range from -65 to 165°C with a max frequency of 18 GHz.

GRF1-J-P-08-E-ST-TH1-E

Samtec

The Samtec GRF1-J-P-08-E-ST-TH1-E RF Connector has 8 ports, 50 ohm impedance, and operates up to 6 GHz. It is ideal for commercial applications requiring a reliable connector with gold finish contacts and PTFE insulation material. The connector features a straight jack body style with solder termination suitable for board mounting.

3285-6001-TD

Sv Microwave

3285-6001-TD by Sv Microwave is a RF SMPM connector with 50 ohm impedance, gold finish, and right angle mounting. Ideal for applications requiring high frequency up to 40 GHz such as aerospace and defense systems.

145-0701-601

Cinch Connectivity Solutions

RF SMK CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (50); Panel Mount: YES; Insertion Loss: .37 dB;

128-0711-201

Vertiv

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 6 GHz; Termination Type: SURFACE MOUNT;

MM4829-2702

Murata Manufacturing

Murata Manufacturing's MM4829-2702 RF CONNECTOR has a Voltage Standing Wave Ratio of 1.3, operating up to 6 GHz. With SNAP coupling and 50 ohm impedance, it is ideal for BOARD mounting in high-frequency applications.

R222508700

Radiall S A

The Radiall S A R222508700 RF SMP Connector features a body diameter of 0.164", insertion loss of 0.12 dB, and gold (Au) termination contact finish. With a max operating frequency of 18 GHz, it is ideal for board mounting in applications requiring a durable, 50 ohm coaxial connection with high insulation resistance and low voltage standing wave ratio.