Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

U.FL-R-SMT-1(80)

Manufacturer

Hirose Electric
Manufacturer's Part Number

U.FL-R-SMT-1(80)
Description

OTHER RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 200VAC; Insulation Resistance: 500000000 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

LAN8720AI-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

1N4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

World Products

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

LM317T

Tt Electronics Plc

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;

Details

FDC5614P

Onsemi

FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

LM317T

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;

Details

BAV99

Infineon Technologies

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

1N4148WS

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

U.FL-R-SMT-1(80) Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.3
Panel Mount:	NO
Sub-Category:	Other RF Connectors
Shell Finish:	SILVER
Termination Type:	SURFACE MOUNT
Maximum Operating Temperature (Cel):	90
Body Length:	.122 inch
Contact Gender:	MALE
Connector Type:	OTHER RF CONNECTOR
Contact Material:	NOT SPECIFIED
Mounting Option-1:	LOCKING
Insulation Resistance:	500000000 ohm
Mounting Style:	STRAIGHT
No. of Ports:	1
Durability:	30 Cycles
Mounting Type:	BOARD
Body Depth:	.049 inch
Minimum Operating Temperature:	-40 Cel
Total No. of Contacts:	1
Body Width:	.118 inch
Dielectric Withstanding Voltage (V):	200VAC
Coupling Type:	SNAP
Characteristic Impedance:	50 ohm
Insulator Material:	LIQUID CRYSTAL POLYMER
Reference Standard:	UL
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	6 GHz
Shell Material:	PHOSPHOR BRONZE
Body or Shell Style:	RECEPTACLE
Reliability:	COMMERCIAL

Category Top Products

EPL.00.250.NTN

Lemo Usa

EPL.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting in RF applications requiring FEMALE contact and SOLDER termination.

DIN7A-PP-C-GF-ST-CA3

Samtec

Samtec DIN7A-PP-C-GF-ST-CA3 is a 1.0/2.3 DIN RF connector with 75 ohm impedance, gold over nickel termination, and snap coupling. Ideal for cable mounting applications, it has a body diameter of 0.325" and operates b/w -65°C to 125°C temperatures.

90001

Lapp Group Pvt

RF CONNECTOR; Body or Shell Style: PLUG; Manufacturer Series: Y92; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO;

SF1621-60026-1S

Sv Microwave

SF1621-60026-1S by Sv Microwave is a threaded RF connector with 0.283 dB insertion loss, 50 ohm impedance, and 50 GHz operating frequency. Ideal for panel mount applications in high-frequency environments due to its stainless steel shell, polyetherimide insulator, and surface mount termination.

CONUFL001-SMD-T

Linx Technologies

CONUFL001-SMD-T by Linx Technologies is a threaded RF connector with dimensions of 0.122" x 0.118" x 0.049". It operates b/w -40°C to 90°C, has a characteristic impedance of 50Ω, and supports frequencies up to 6 GHz. Ideal for surface mount applications in various electronic devices.

MS-162B(02)

Hirose Electric

Other RF Connectors; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);

U.FL-R-SMT-1(60)

Hirose Electric

U.FL-R-SMT-1(60) by Hirose Electric is a surface mount RF connector with a body length of 0.122 inch, body width of 0.118 inch, and body depth of 0.049 inch. It has a max operating frequency of 6 GHz and is commonly used in commercial applications requiring a characteristic impedance of 50 ohm.

73412-0114

Molex

Molex 73412-0114 RF Connector has a Voltage Standing Wave Ratio of 1.3, SNAP coupling type, and male contact gender. Ideal for surface mount board applications in various electronic devices.

SMP-MSLD-PCT-10

Amphenol

RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

BJ77FL

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Maximum Operating Frequency: .5 GHz; Mounting Option-1: LOCKING;

5-1814821-7

TE Connectivity

5-1814821-7 by TE Connectivity is a threaded RF F connector with 0.413" body diameter and 500VAC dielectric voltage. It has 75 ohm impedance, female contact gender, and crimp termination. Ideal for commercial applications requiring durable connectors with 500 cycles lifespan at temperatures ranging from -55 to 85°C.

2391

Pomona Electronics

Pomona Electronics 2391 RF Connector features gold finish, bayonet coupling, and brass contact material. With 50 ohm impedance, it is ideal for solder termination in male-female connections. Suitable for straight mounting applications in various RF devices.

920-185J-51A

Amphenol

Amphenol 920-185J-51A RF Connector has a SNAP coupling type, PTFE insulator, and 50 ohm impedance. Ideal for board mounting in applications up to 6 GHz frequency range.

PL455ACWS-202

Cinch Connectivity Solutions

PL455ACWS-202 by Cinch Connectivity Solutions is a FEMALE CRIMP RF connector with STRAIGHT mounting style for CABLE termination. Featuring 0.002 GHz frequency, it's ideal for commercial applications requiring reliable COAX connections with LOCKING option.

1222255-1

TE Connectivity

RF CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

902-9040

Amphenol

Amphenol 902-9040 RF connector features 0.2 dB insertion loss, SNAP coupling type, and 50 ohm impedance. Ideal for applications up to 6 GHz frequency, it is a surface mount female connector suitable for board mounting in straight orientation.

3-1393670-9

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Panel Mount: YES; Filter Feature: NO;

1055687-1

Tyco Electronics Amp

RF SSMT CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Insulator Material: POLYPHENYLENE SULFIDE; Contact Material: COPPER ALLOY;

MS-147-C(LP)-1

Hirose Electric

MS-147-C(LP)-1 by Hirose Electric is a RF connector with 0.4 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. It is used in commercial applications requiring durable connectors with snap coupling, gold finish, and male contact gender for cable mounting.

1-1532006-1

TE Connectivity

TE Connectivity 1-1532006-1 RF Connector features threaded coupling, 50 ohm impedance, and solder termination. Ideal for panel and cable mounting applications in RF systems requiring female jack connectors.