Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

7-1532004-0

Manufacturer

TE Connectivity
Manufacturer's Part Number

7-1532004-0
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 2 GHz; Voltage Standing Wave Ratio: 1.2; Mounting Style: RIGHT ANGLE;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Bytesonic Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Shandong Yiguang Electronic Joint Stock

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Jiangsu Jiejie Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Comchip Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Cobham Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;

Details

LM317T

Integrated Power Semiconductors

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

Details

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

LM555CN

Harris Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

2N2222A

Gec Plessey Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

LM107H/883

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

CRCW080510K0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.

Details

NE555DR

Texas Instruments

NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

BSS138K-13

Diodes Incorporated

BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.

Details

LM2931AZ-5.0G

Onsemi

LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.

Details

SMBJ18CA

Sensitron Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

7-1532004-0 Technical Details

TYPE	DESCRIPTION
Mounting Style:	RIGHT ANGLE
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.2
Filter Feature:	NO
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
Panel Mount:	NO
Mounting Type:	CABLE
MIL Conformity:	NO
Coupling Type:	THREADED
Termination Type:	CLAMP SOLDER
Contact Gender:	MALE
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Connector Type:	RF CONNECTOR
Contact Material:	NOT SPECIFIED
Additional Features:	VSWR MAX AT 2GHZ
Option:	GENERAL PURPOSE
Manufacturer Series:	1532004
Maximum Operating Frequency:	2 GHz
Body or Shell Style:	PLUG
DIN Conformance:	NO

Category Top Products

81_MMBX-S50-0-1/111_NM

Huber+suhner Ag

81_MMBX-S50-0-1/111_NM by Huber+suhner Ag is a RF MMBX CONNECTOR with SNAP coupling, LCP/PFA insulator, and BRASS shell. It operates b/w -55 to 155 °C, has 1.15 VSWR, and supports up to 12.4 GHz frequency. Ideal for commercial applications requiring durable connectors with 50 ohm impedance for surface mount on boards.

81_MMBX-S50-0-1/111_NH

Huber+suhner Ag

81_MMBX-S50-0-1/111_NH by Huber+suhner Ag is a RF MMBX CONNECTOR with characteristic impedance of 50 ohm, operating up to 12.4 GHz. It features SNAP coupling, LCP/PFA insulator, and brass shell material. Ideal for board mounting in commercial applications due to its durability of 100 cycles and temperature range from -55 to 155 °C.

925-137J-51P

Amphenol

RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

PRF24-J-C-EP-085-SS

Samtec

Samtec's PRF24-J-C-EP-085-SS RF Connector features a 0.33" body diameter and 0.985" depth, with threaded coupling. Ideal for cable mounting, it has solder clamp termination and female contact gender, suitable for various RF applications.

222113

Amphenol

Amphenol 222113 RF Connector: 50 ohm impedance, 1 GHz frequency, TIN LEAD finish. Used in RF applications for cables with PLUG body style and CRIMP termination. Operating temp -40 to 85°C.

U.FL-R-SMT(01)

Hirose Electric

U.FL-R-SMT(01) by Hirose Electric is a RF connector with 50 ohm impedance, gold contact finish, and 8 GHz operating frequency. It is used in commercial applications for board mounting due to its surface mount termination type and male contact gender. With a durability of 30 cycles, it offers reliable performance in temperatures ranging from -40°C to 105°C.

1045621-1

TE Connectivity

TE Connectivity 1045621-1 is a threaded RF SSMA connector with PTFE insulator, 50 ohm impedance, and 18 GHz frequency. Ideal for commercial applications requiring a female jack connector with right-angle mounting and solder termination. Operating temperature range from -65 to 165°C makes it versatile for various environments.

292-101P-52S

Amphenol

Amphenol 292-101P-52S is a threaded RF connector with gold finish, suitable for cables. Features include 50 ohm impedance, 40 GHz frequency, and low VSWR of 1.3. Ideal for high-frequency applications requiring reliable signal transmission.

BJ459ACWP-201

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; Shell Material: BRASS; Mounting Option-1: LOCKING;

SF1212-6000

Sv Microwave

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Body Depth: .32 inch; Maximum Operating Frequency: 20 GHz;

930-118P-51A

Amphenol

RF QMA CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; JESD-609 Code: e4; Mating Contact Finish: GOLD; Termination Type: CRIMP SOLDER;

908-NM43200

Amphenol

Amphenol's 908-NM43200 RF connector features a dielectric voltage of 700VAC, gold contact finish, and a max operating frequency of 6 GHz. Ideal for commercial applications requiring a durable, 50 ohm coaxial plug with right-angle mounting and crimp termination on RD-178 cable types.

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

R285.001.021

Radiall S A

R285.001.021 by Radiall S A is a SNAP RF CONNECTOR with 50 ohm impedance, suitable for applications up to 6 GHz frequency. It features RIGHT ANGLE mounting style and can operate in temperatures ranging from -40°C to 90°C, making it ideal for various RF connectivity needs.

331-0472-260

Hirose Electric

OTHER RF CONNECTOR;

PL455ACWS-202

Cinch Connectivity Solutions

PL455ACWS-202 by Cinch Connectivity Solutions is a FEMALE CRIMP RF connector with STRAIGHT mounting style for CABLE termination. Featuring 0.002 GHz frequency, it's ideal for commercial applications requiring reliable COAX connections with LOCKING option.

HK-LR-SR2

Hirose Electric

RF CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;

925-127P-51P

Amphenol

RF SMPM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

1252294-1

TE Connectivity

The TE Connectivity 1252294-1 RF Connector features a body diameter of 0.177", insulation resistance of 10^10 ohm, and dielectric voltage rating of 1400VAC. Ideal for applications requiring a reliable board and panel mount RF connection with a characteristic impedance of 50 ohm, suitable for frequencies up to 6 GHz in commercial settings.

222197

Amphenol

RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -65 Cel; Shell Material: BRASS;