Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

25-7630

Manufacturer

Vertiv
Manufacturer's Part Number

25-7630
Description

RF F CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 75 ohm; Body or Shell Style: JACK; Polarization Key: POLARIZED HOUSING;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Central Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Microsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358AN

Texas Instruments

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

Details

SMBJ18CA

Brightking

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS06-32.768KHZ-T

Abracon

Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.

Details

LM317T

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

1N4148WS

Weitron Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

LM107H/883

Texas Instruments

LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0402FR-071KL

Yageo

The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

Details

2N7002

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

SMBJ18CA

Multicomp Pro

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;

Details

2N2222A

International Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WS

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Uniohm

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

25-7630 Technical Details

TYPE	DESCRIPTION
Mounting Style:	RIGHT ANGLE
Polarization Key:	POLARIZED HOUSING
No. of Ports:	1
Contact Style:	COAX
Sub-Category:	Other RF Connectors
Mounting Type:	BOARD
Shell Finish:	TIN
Body Depth:	.1 inch
Total No. of Contacts:	1
Termination Type:	SURFACE MOUNT
Contact Gender:	FEMALE
Characteristic Impedance:	75 ohm
Insulator Material:	POLYPHENYLENE
Connector Type:	RF F CONNECTOR
Manufacturer Series:	25
Mounting Option-1:	LOCKING
Maximum Operating Frequency:	1 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK
Reliability:	COMMERCIAL

Category Top Products

1086009-1

TE Connectivity

TE Connectivity's 1086009-1 RF Connector features 0.14 dB Insertion Loss, SNAP Coupling Type, and POLYPHENYLENE SULFIDE Insulator. With a max operating frequency of 6 GHz, it is ideal for board mounting applications requiring a 50 ohm characteristic impedance and female contact gender.

FFA.00.250.NTAC31

Lemo Usa

FFA.00.250.NTAC31 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.

SMP-MSLD-PCR

Amphenol

The Amphenol SMP-MSLD-PCR RF connector features a dielectric voltage of 700VAC, gold termination finish, and liquid crystal polymer insulator. Ideal for applications requiring a 50 ohm characteristic impedance, it operates up to 12 GHz with a VSWR of 1.2. Suitable for commercial use in board-mounted systems, offering durability with 500 mating cycles.

GRF1-J-P-04-E-RA-TH1

Samtec

Samtec's GRF1-J-P-04-E-RA-TH1 RF Connector features threaded coupling, gold over nickel termination, and PTFE insulator. With 50 ohm impedance and 6 GHz frequency, it suits board mounting applications requiring female contact gender in right angle configuration.

1996777-2

TE Connectivity

TE Connectivity's 1996777-2 RF SMPM CONNECTOR has a temp range of -55 to 105°C, with 8 contacts and characteristic impedance of 50 ohm. It features stainless steel shell material, suitable for board mounting applications.

R317.074.000

Radiall S A

R317.074.000 RF Connector by Radiall S A features a body diameter of 0.563", gold termination with nickel barrier, and a max operating temperature of 165°C. With a characteristic impedance of 50 ohm, it is ideal for applications up to 2 GHz in industries requiring reliable cable connections at temperatures ranging from -65°C to 165°C.

23_QN-50-0-1/133_NE

Huber+suhner Ag

23_QN-50-0-1/133_NE RF connector by Huber+suhner Ag features a characteristic impedance of 50 ohm, max operating frequency of 11 GHz, and voltage standing wave ratio of 1.58. With a panel mount design and solder termination type, it is ideal for applications requiring reliable RF connections in high-frequency environments up to 125°C.

920-185J-51A

Amphenol

Amphenol 920-185J-51A RF Connector has a SNAP coupling type, PTFE insulator, and 50 ohm impedance. Ideal for board mounting in applications up to 6 GHz frequency range.

7702-13

Winchester Interconnect

Winchester Interconnect's 7702-13 RF Connector features gold contact finish, crimp termination, and 75 ohm impedance. Ideal for panel mounting in applications requiring a straight jack connector with a max operating frequency of 0.5 GHz.

282119-75

Amphenol

Amphenol 282119-75 RF connector features 1050VAC Dielectric Withstanding Voltage, 0.839" Body Depth, and -40 to 75°C Operating Temperature. Ideal for RF applications up to 2GHz, this crimp termination connector with a nickel finish is durable for commercial use in cable installations.

73415-3591

Molex

The Molex 73415-3591 RF SMP Connector features a body diameter of 0.25", gold termination contact finish, and a max operating frequency of 40 GHz. Ideal for board mounting applications in commercial settings, with durability up to 500 cycles and a characteristic impedance of 50 ohm.

MM4829-2702

Murata Manufacturing

Murata Manufacturing's MM4829-2702 RF CONNECTOR has a Voltage Standing Wave Ratio of 1.3, operating up to 6 GHz. With SNAP coupling and 50 ohm impedance, it is ideal for BOARD mounting in high-frequency applications.

73300-0020

Molex

The Molex 73300-0020 RF SMPM Connector has a body length of 0.157", insertion loss of 0.1 dB, and dielectric voltage of 700VAC. Ideal for board mounting in applications requiring a durable female coax plug with 50 ohm impedance, operating up to 65 GHz. With gold shell finish, POLYTETRAFLUOROETHYLENE insulator, and -65 to 165 °C temperature range.

PSMP-MSSB-PCS

Amphenol

Amphenol's PSMP-MSSB-PCS RF SMP connector has a body diameter of 0.354" and insertion loss of 0.095 dB. With a max operating frequency of 10 GHz, it is ideal for high-frequency applications. The connector features a snap coupling type and surface mount termination, making it suitable for board mounting in various electronic devices.

M39012/22-0001

Winchester Interconnect

The Winchester Interconnect M39012/22-0001 RF CONNECTOR features a 0.62" Body Depth, FEMALE Contact Gender, and RECEPTACLE Body Style. It is commonly used in commercial applications requiring a reliable COAX connection with STRAIGHT mounting style and LOCKING option for secure installations.

0734160010

Molex

Molex 0734160010 is a RF 7/16 DIN CONNECTOR with SNAP coupling, suitable for 50 ohm systems up to 7 GHz. It features FEMALE contact gender and JACK body style, designed for PANEL mounting in straight configuration. Ideal for high-frequency applications requiring reliable RF connections.

CJT-T-P-GF-ST-TH1

Samtec

CJT-T-P-GF-ST-TH1 by Samtec is a RF connector with 0.185" body diameter, GOLD OVER NICKEL termination finish, and POLYTETRAFLUOROETHYLENE insulator. It has 100 ohm impedance, operates up to 4 GHz, and is ideal for board mounting in applications requiring polarized key and male contact gender.

U.FL-R-SMT-1(60)

Hirose Electric

U.FL-R-SMT-1(60) by Hirose Electric is a surface mount RF connector with a body length of 0.122 inch, body width of 0.118 inch, and body depth of 0.049 inch. It has a max operating frequency of 6 GHz and is commonly used in commercial applications requiring a characteristic impedance of 50 ohm.

1211-66138

Sv Microwave

1211-66138 RF SMP connector by Sv Microwave features a 0.171" body diameter, 0.25 dB insertion loss, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring high insulation resistance, such as aerospace and telecommunications. Operating temperature range from -65 to 165°C with a max frequency of 18 GHz.

U.FL-R-SMT

Hirose Electric

U.FL-R-SMT by Hirose Electric is a RF connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz frequency. It features liquid crystal polymer insulation, surface mount termination, and silver shell finish. Ideal for board mounting in various electronic devices requiring reliable RF connections.