Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

R317.072.000

Manufacturer

Radiall S A
Manufacturer's Part Number

R317.072.000
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Total No. of Contacts: 1; Body or Shell Style: PLUG;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;

Details

1N4148

Semitronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Terry Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

2N2222A

Microsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;

Details

2N2222A

Swampscott Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

Aeroflex/metelics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;

Details

MBRS360T3G

Onsemi

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

Details

LL4148

Micronas Semiconductor Holding Ag

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;

Details

LL4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

SMBJ18CA

Dc Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

R317.072.000 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Voltage Standing Wave Ratio:	1.8
Panel Mount:	NO
Mounting Type:	CABLE
Shell Finish:	NICKEL
Body Depth:	2.094 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Coupling Type:	BAYONET
Termination Type:	CRIMP
Maximum Operating Temperature (Cel):	165
Contact Gender:	FEMALE
Body Diameter:	.563 inch
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Connector Type:	RF CONNECTOR
Additional Features:	APPLICABLE CABLES: RG-58, RG-141
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	2 GHz
Shell Material:	BRASS
Body or Shell Style:	PLUG

Category Top Products

SMP-FS-LDPCT

Amphenol

SMP-FS-LDPCT by Amphenol is a RF SMP connector with 50 ohm impedance, gold shell finish, and 12 GHz operating frequency. It is used in commercial applications for board mounting with male contact gender and PTFE insulator material. Withstanding voltage of 700VAC, it offers durability up to 500 cycles at temperatures ranging from -65 to 165°C.

SF1621-60059

Sv Microwave

SF1621-60059 by Sv Microwave is a threaded RF 2.4mm connector with 50 ohm impedance, suitable for board and panel mounting. Featuring a VSWR of 1.25, it operates b/w -65°C to +165°C and supports frequencies up to 50 GHz. Ideal for applications requiring high-frequency signal transmission in harsh environments.

73300-0110

Molex

Molex 73300-0110 RF SMPM Connector features threaded coupling, 50 ohm impedance, and operates up to 65 GHz. Ideal for board mounting applications requiring male plug connectors with solder termination.

2-330311-1

TE Connectivity

TE Connectivity 2-330311-1 RF Connector features threaded coupling, fluoropolymer insulator, and brass shell with gold finish. Suitable for RG-174/U cable type, it has a characteristic impedance of 75 ohm. Used in commercial applications with a temperature range of -65 to 85°C.

BJ770-GL

Bel Fuse

BJ770-GL by Bel Fuse is a RF TRB connector with 0.562" body diameter and 0.487" body depth. It has a nickel shell finish, brass shell material, and solder termination type. Ideal for commercial applications at 0.5 GHz frequency, it features a female contact gender and straight mounting style with locking option.

2390

Pomona Electronics

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Panel Mount: NO; Mating Contact Finish: GOLD; MIL Conformity: NO;

FFA.00.250.NTAC31

Lemo Usa

FFA.00.250.NTAC31 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.

1222-4011

Sv Microwave

1222-4011 RF SMP Connector by Sv Microwave features a 0.135" body diameter, 0.62 dB insertion loss, and SNAP coupling type. Ideal for applications requiring a 50 ohm characteristic impedance, this connector operates up to 26.5 GHz with a VSWR of 1.3, making it suitable for high-frequency communication systems.

EM30MSD-A

Hirose Electric

OTHER RF CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Silver (Ag);

PSMP-MSLD-PCS

Amphenol

PSMP-MSLD-PCS by Amphenol is a RF SMP CONNECTOR with 50 ohm impedance, 0.095 dB insertion loss, and 10 GHz max operating frequency. It is used in board mounting applications for high-frequency signal transmission due to its SNAP coupling type and POLYETHERETHERKETONE insulator material.

431-130J-52S

Amphenol

RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

U.FL-R-SMT-1(80)

Hirose Electric

U.FL-R-SMT-1(80) by Hirose Electric is a 50 ohm RF connector with liquid crystal polymer insulator, suitable for commercial applications up to 6 GHz. Featuring a dielectric voltage of 200VAC and operating temperature range from -40°C to 90°C, it offers high durability with 30 cycles lifespan. This surface mount connector has a compact design with dimensions of 0.122" x 0.118" x 0.049", making it ideal for board mounting in various electronic devices.

R222.052.000

Radiall S A

Radiall S A R222.052.000 RF Connector features 0.13" body diameter, 0.759 dB insertion loss, and gold (Au) termination with Ni barrier. Ideal for 40 GHz applications with 50 ohm impedance, SNAP coupling, and solder termination for female connectors on cables. Operating range from -65 to 165 °C.

3211-60298

Sv Microwave

RF SMPM CONNECTOR;

U.FL-R-SMT-1(60)

Hirose Electric

U.FL-R-SMT-1(60) by Hirose Electric is a surface mount RF connector with a body length of 0.122 inch, body width of 0.118 inch, and body depth of 0.049 inch. It has a max operating frequency of 6 GHz and is commonly used in commercial applications requiring a characteristic impedance of 50 ohm.

CJT-T-P-GF-ST-TH1

Samtec

CJT-T-P-GF-ST-TH1 by Samtec is a RF connector with 0.185" body diameter, GOLD OVER NICKEL termination finish, and POLYTETRAFLUOROETHYLENE insulator. It has 100 ohm impedance, operates up to 4 GHz, and is ideal for board mounting in applications requiring polarized key and male contact gender.

CBJR70A

Cinch Connectivity Solutions

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Diameter: .38 inch; Mounting Option-1: LOCKING; Body or Shell Style: JACK;

SMP-MSLD-PCR

Amphenol

The Amphenol SMP-MSLD-PCR RF connector features a dielectric voltage of 700VAC, gold termination finish, and liquid crystal polymer insulator. Ideal for applications requiring a 50 ohm characteristic impedance, it operates up to 12 GHz with a VSWR of 1.2. Suitable for commercial use in board-mounted systems, offering durability with 500 mating cycles.

MS-147(06)

Hirose Electric

MS-147(06) by Hirose Electric is a 50 ohm RF connector with a body length of 0.228 inch and a body width of 0.213 inch. It has an insertion loss of 0.4 dB and can operate at temperatures ranging from -30 to 85 °C. This connector is commonly used in commercial applications requiring reliable, high-frequency connections up to 6 GHz.

1045621-1

TE Connectivity

TE Connectivity 1045621-1 is a threaded RF SSMA connector with PTFE insulator, 50 ohm impedance, and 18 GHz frequency. Ideal for commercial applications requiring a female jack connector with right-angle mounting and solder termination. Operating temperature range from -65 to 165°C makes it versatile for various environments.