Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ULN2803ADWG4

Manufacturer

Texas Instruments
Manufacturer's Part Number

ULN2803ADWG4
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; Length: 11.55 mm;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;

Details

FDD5614P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;

Details

LM358N

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

SMBJ18CA

Concord Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148-GS08

Vishay Intertechnology

The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.

Details

1N4148

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;

Details

LM317D2TG

Onsemi

LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

Details

2N2222A

Semiconductor Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

2N2222A

North American Philips Discrete Products Div

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

PIC18F4550-I/PT

Microchip Technology

PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.

Details

LM317T

Linear Technology

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;

Details

ULN2803ADWG4 Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Output Characteristics:	OPEN-COLLECTOR
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	2.65 mm
Surface Mount:	YES
Maximum Supply Current:	1.35 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	18
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G18
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.5 mm
Moisture Sensitivity Level (MSL):	2
Driver No. of Bits:	8
Maximum Supply Voltage:	3 V
Minimum Operating Temperature:	-40 Cel
No. of Functions:	8
Package Equivalence Code:	SOP18,.4
Output Current Flow Direction:	SINK
Length:	11.55 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm

Category Top Products

TPS22916BYFPT

Texas Instruments

TPS22916BYFPT by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and industrial temp grade. It features built-in transient protections and is ideal for buffer or inverter based applications requiring source output current flow direction.

MAX845ESA-T

Maxim Integrated

MAX845ESA-T by Maxim Integrated is an 8-terminal peripheral driver with a supply voltage range of 4.5V to 5.5V, suitable for industrial applications. It features a peak current limit of 1A, Gull Wing terminal form, and operates in temperatures from -40°C to 85°C. Ideal for buffer or inverter-based systems requiring source and sink output current flow control.

L293B

STMicroelectronics

L293B by STMicroelectronics is a 16-terminal peripheral driver with a max supply voltage of 36V. It features built-in protections for over current and thermal issues, making it ideal for applications requiring a true output polarity and nominal output peak current limit of 2A. The technology used is bipolar with an interface IC type of half bridge based peripheral driver.

VNQ860SPTR-E

STMicroelectronics

STMicroelectronics' VNQ860SPTR-E is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and has a nominal output peak current limit of 0.7A. This small outline driver is ideal for applications requiring source flow direction in automotive systems.

L293DNEE4

Texas Instruments

L293DNEE4 by Texas Instruments is a half bridge based peripheral driver with 2 functions, 16 terminals, and a max output current of 1.2A. It operates b/w -40 to +70°C and is ideal for driving inductive loads in robotics and motor control applications.

ULQ2003ADR2G

Onsemi

ULQ2003ADR2G by Onsemi is a 16-terminal peripheral driver with built-in transient protection. It operates b/w -40 to 85°C, has an inverted output polarity, and a nominal voltage of 50V. Ideal for applications requiring sink current flow direction, such as buffer or inverter-based interface ICs.

UDN-2987A

Sprague Electric

Sprague Electric's UDN-2987A is a bipolar peripheral driver with 8 bits. It has a max output current of 0.35 A and operates b/w -20°C to 85°C. The package style is in-line with 20 terminals, making it suitable for various electronic applications.

ITS4200SMEOHUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;

SN754410NE

Texas Instruments

SN754410NE by Texas Instruments is a 16-terminal peripheral driver with built-in transient and thermal protections. It operates b/w -40 to 85°C, supports a max output current of 1A, and has a turn-on time of 0.4us. Ideal for industrial applications requiring true output polarity control in a compact package style.

L298P

STMicroelectronics

L298P by STMicroelectronics is a full bridge peripheral driver with 2 functions, operating at a supply voltage range of 4.5V to 46V. It features built-in protections for over current and thermal issues, making it suitable for various applications requiring source and sink output current flow direction. The package style is small outline with heat sink, ideal for space-constrained designs.

BTS50081EKBXUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Terminal Finish: TIN;

ULN2804AN

Texas Instruments

ULN2804AN by Texas Instruments is a CMOS technology-based peripheral driver with 8 bits. It has a max output current of 0.35A and built-in transient protection. Ideal for applications requiring sink output current flow direction, with a supply voltage range from 6V to 15V.

DS2482S-100

Maxim Integrated

DS2482S-100 by Maxim Integrated is a peripheral driver with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.9V to 5.5V and is ideal for industrial applications requiring buffer or inverter-based interface ICs with a source current flow direction.

BTS452R

Infineon Technologies

BTS452R by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 150 °C with a supply voltage range of 6-52 V. This rectangular package is ideal for automotive applications requiring source and sink output current flow direction.

VND7NV04TR-E

STMicroelectronics

VND7NV04TR-E by STMicroelectronics is a Peripheral Driver with built-in protections for transient, over current, over voltage, and thermal issues. It has a max output peak current limit of 9A and turn-on time of 2.3µs. Ideal for applications requiring buffer or inverter based peripheral drivers in compact spaces.

BTS555E3146HKSA1

Infineon Technologies

BTS555E3146HKSA1 by Infineon is a 5-terminal peripheral driver with max supply voltage of 34V. It offers built-in protections for transient, over current, and over voltage. Ideal for applications requiring a nominal output peak current limit of 520A and a turn-on time of 600µs.

TBD62083APG

Toshiba

Toshiba TBD62083APG is an 8-bit BUFFER/INVERTER BASED PERIPHERAL DRIVER with a max output current of 0.4A. It operates in industrial temperature range (-40 to 85°C) and supports a supply voltage range from 2.5V to 25V. Ideal for applications requiring high-current sinking capabilities in various electronic systems.

IMP803LG

Daily Silver Imp Microelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

VNQ500PEP

STMicroelectronics

STMicroelectronics' VNQ500PEP is a 36V peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It features 12 terminals in a small outline package suitable for buffer or inverter-based applications. With a supply voltage range of 5.5V to 36V, it is ideal for driving loads in automotive and industrial systems.

VNP5N07-E

STMicroelectronics

VNP5N07-E by STMicroelectronics is a 3-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It has a turn-on time of 0.25 us and nominal output peak current limit of 5 A. This BUFFER OR INVERTER BASED IC is used in applications requiring sink output current flow direction.