Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

292-100J-52S

Manufacturer

Amphenol
Manufacturer's Part Number

292-100J-52S
Description

RF 2.92MM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Body Depth: .796 inch; Shell Material: STAINLESS STEEL;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Mde Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ECS-.327-12.5-17X-TR

Ecs International

ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.

Details

M39029/56-351

Defense Logistics Agency

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;

Details

FDC5614P

TAIZHOU ELECTRONICS CO LTD

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

Details

1N4148

ROHM

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N5819HW-7-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Dc Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Synsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Promax-johnton

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358M

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BAV99

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

87832-1420

Molex

87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0603JR-070RL

Yageo

Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.

Details

292-100J-52S Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Other Names:	115-292-100J-52S
Voltage Standing Wave Ratio:	1.3
Panel Mount:	YES
Mounting Type:	CABLE AND PANEL
Shell Finish:	GOLD
Body Depth:	.796 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Coupling Type:	THREADED
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	165
Contact Gender:	FEMALE
Body Diameter:	.23 inch
Characteristic Impedance:	50 ohm
Insulator Material:	POLYETHERIMIDE
Connector Type:	RF 2.92MM CONNECTOR
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	40 GHz
Shell Material:	STAINLESS STEEL
Body or Shell Style:	JACK

Category Top Products

A-1JA

Amphenol

A-1JA RF connector by Amphenol features a body length of 0.102", insulation resistance of 500M ohm, and dielectric voltage withstand of 200VAC. Ideal for board mounting in commercial applications, this male jack connector has a characteristic impedance of 50 ohm and operates up to 6GHz frequency.

GRF1-J-P-04-E-ST-TH1

Samtec

Samtec's GRF1-J-P-04-E-ST-TH1 RF Connector features threaded coupling, 50 ohm impedance, and a max frequency of 6 GHz. Ideal for board mounting applications requiring a female jack connector with gold over nickel finish for solder termination.

GRF7-J-P-04-GF-RA-TH1-E

Samtec

Samtec's GRF7-J-P-04-GF-RA-TH1-E RF Connector features 4 ports, 50 ohm impedance, and a dielectric voltage of 700VAC. With a threaded coupling type, it is ideal for commercial applications requiring a reliable signal connection up to 6 GHz frequency.

A-4JA

Amphenol

A-4JA by Amphenol is a SNAP RF CONNECTOR with 50 ohm impedance and 1.4 VSWR, suitable for applications up to 6 GHz. It features BOARD mounting and SURFACE MOUNT termination, ideal for high-frequency electronic systems requiring reliable signal transmission.

BJ770

Bel Fuse

BJ770 RF TRB connector by Bel Fuse features a body diameter of 0.562" and shell finish in nickel. With a max operating frequency of 0.5 GHz, it is ideal for commercial applications requiring reliable female coaxial connections on panels. The brass shell material and solder termination ensure secure mounting and stable performance.

SF1521-60061-2S

Sv Microwave

RF CONNECTOR;

3231

Pomona Electronics

The Pomona Electronics 3231 RF Connector features gold-plated termination and mating contacts, with a characteristic impedance of 50 ohm. It utilizes a bayonet coupling type for secure connections and is suitable for applications requiring high-quality signal transmission in straight mounting configurations.

59S2AQ-40MT5-Z_1

Rosenberger Hochfrequenztechnik & Kg

59S2AQ-40MT5-Z_1 RF connector by Rosenberger features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. Ideal for commercial applications, this right-angle plug connector offers high durability with 25 cycles and a wide temperature range from -40 to 105°C.

1467938-1

TE Connectivity

TE Connectivity's 1467938-1 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for board mounting in applications up to 2 GHz frequency range, with female contact gender and right angle mounting style.

FFA.00.250.NTAC31Z

Lemo Usa

FFA.00.250.NTAC31Z by Lemo Usa is a RF CONNECTOR with SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 1.5 GHz, solder termination, and a voltage standing wave ratio of 1.25.

19S141-40ML5

Rosenberger Hochfrequenztechnik & Kg

19S141-40ML5 by Rosenberger is a RF SMP connector with 0.17 dB insertion loss and 1.2 VSWR, ideal for applications up to 26.5 GHz. Featuring gold termination finish, liquid crystal polymer insulator, and brass contact material, it offers reliable performance in board-mounted setups requiring a 50 ohm characteristic impedance.

142-1000-003

Vertiv

RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; MIL Conformity: NO; Characteristic Impedance: 50 ohm; Panel Mount: NO;

R222152000W

Radiall S A

R222152000W RF SMP Connector by Radiall S A features a low insertion loss of 0.76 dB, gold termination with nickel barrier, and a max operating frequency of 40 GHz. Ideal for applications requiring high-frequency signal transmission, such as telecommunications and aerospace industries.

1055687-1

TE Connectivity

TE Connectivity 1055687-1 RF Connector features 0.15 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for commercial applications requiring a durable male plug connector with surface mount termination and gold finish shell.

18S102-40ML5

Rosenberger Hochfrequenztechnik & Kg

The RF SMP connector 18S102-40ML5 by Rosenberger features a 50 ohm characteristic impedance, 0.4 dB insertion loss, and 65 GHz max operating frequency. Ideal for commercial applications, it offers a durable design with gold finish, suitable for board mounting with surface mount termination.

EPY.00.250.NTN

Lemo Usa

EPY.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting applications. It features FEMALE contact gender, RIGHT ANGLE mount style, and 1.25 VSWR ideal for solder termination in RF systems.

R317.072.000

Radiall S A

R317.072.000 by Radiall S A is a RF connector with BAYONET coupling, suitable for 2 GHz applications. Features include POLYTETRAFLUOROETHYLENE insulator, NICKEL finish, and 50 ohm impedance. Ideal for high-frequency communication systems requiring a max operating temperature of 165 °C and VSWR of 1.8.

BJ159-47

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1700VAC; Body or Shell Style: JACK; Mounting Style: STRAIGHT;

20279-001E-03

I-pex

The I-pex 20279-001E-03 is a RF MHF connector with a body length of 0.102", body diameter of 0.079", and max operating frequency of 9 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm, such as wireless communication systems.

3221-40131

Sv Microwave

RF SMPM CONNECTOR;