Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

81_MMBX-S50-0-1/111_NH

Manufacturer

Huber+suhner Ag
Manufacturer's Part Number

81_MMBX-S50-0-1/111_NH
Description

RF MMBX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Filter Feature: NO; DIN Conformance: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Db Lectro

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

M39029/58-360

Defense Logistics Agency

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

Details

1N4148WT

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Secos

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WT

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;

Details

MMBT2222ALT1G

Onsemi

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

Details

BAV99

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

BAV99

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

1N4148

Rectron

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

DS18B20U

Maxim Integrated

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

LL4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

81_MMBX-S50-0-1/111_NH Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.15
IEC Conformity:	NO
Panel Mount:	NO
MIL Conformity:	NO
Termination Type:	SURFACE MOUNT
Maximum Operating Temperature (Cel):	155
Body Length:	.241 inch
Contact Gender:	MALE
Connector Type:	RF MMBX CONNECTOR
Contact Material:	NOT SPECIFIED
Mounting Style:	STRAIGHT
Other Names:	3628-23001781-ND 3628-81_MMBX-S50-0-1/111_NH 81_MMBX-S50-0-1/111_NH 3628-23001781 23001781
No. of Ports:	1
Contact Style:	COAX
Filter Feature:	NO
Durability:	100 Cycles
Mounting Type:	BOARD
Body Depth:	.226 inch
Minimum Operating Temperature:	-55 Cel
Total No. of Contacts:	1
Body Width:	.241 inch
Coupling Type:	SNAP
Characteristic Impedance:	50 ohm
Insulator Material:	LCP/PFA
Additional Features:	VSWR MAX AT 6 GHZ
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	12.4 GHz
Shell Material:	BRASS
Body or Shell Style:	PLUG
Reliability:	COMMERCIAL
DIN Conformance:	NO

Category Top Products

2391

Pomona Electronics

Pomona Electronics 2391 RF Connector features gold finish, bayonet coupling, and brass contact material. With 50 ohm impedance, it is ideal for solder termination in male-female connections. Suitable for straight mounting applications in various RF devices.

MS-180(20)

Hirose Electric

The Hirose Electric MS-180(20) RF Connector features a 0.3 dB insertion loss, 11 GHz max operating frequency, and 1.4 VSWR. Ideal for board mounting applications in electronics with a temperature range of -40 to 85°C. This female connector has a straight receptacle design with liquid crystal polymer insulator material.

1056724-1

TE Connectivity

TE Connectivity's 1056724-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring high-frequency signal transmission in harsh environments.

1065-1QD

Winchester Interconnect

RF CONNECTOR; Manufacturer Series: 1065-1QD;

3202-6000

Sv Microwave

3202-6000 RF SMPM Connector by Sv Microwave features a 0.156" body diameter and 0.08" body depth, with a max operating frequency of 40 GHz. It has a characteristic impedance of 50 ohm, suitable for panel mount applications in high-frequency environments. The connector is designed with stainless steel shell material and PTFE insulator for durability and reliable performance.

6802

Ddk

RF CONNECTOR; Body or Shell Style: PLUG; MIL Conformity: NO; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: NC;

SMP-MSLD-PCS

Amphenol

The Amphenol SMP-MSLD-PCS RF connector features a 50 ohm characteristic impedance, gold termination finish, and 18 GHz max operating frequency. Ideal for commercial applications, it offers a durability of 500 cycles with a voltage standing wave ratio of 1.3. Suitable for surface mount board mounting, this connector has a temperature range from -65 to 165 °C.

1909763-1

TE Connectivity

TE Connectivity 1909763-1 RF Connector has a body size of 0.118" x 0.118" x 0.049", with SNAP coupling, and liquid crystal polymer insulator. It operates b/w -40°C to 90°C, has characteristic impedance of 50 ohm, and supports up to 6 GHz frequency. Ideal for commercial applications requiring reliable board-mounted male coaxial connectors.

PL75C-201

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Contact Style: COAX; Shell Material: BRASS;

HRMJ-U.FLP(40)

Hirose Electric

OTHER RF CONNECTOR; Reliability: COMMERCIAL; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; IEC Conformity: NO;

222141

Amphenol

Amphenol 222141 RF Connector features threaded coupling, polypropylene insulator, and bright tin contact finish. Ideal for board mounting with solder termination, this connector is commonly used in various RF applications.

82_MMBX-S50-0-13/111_NM

Huber+suhner Ag

82_MMBX-S50-0-13/111_NM RF connector by Huber+suhner Ag features a body length of 0.232", gold termination finish, and a max operating frequency of 12.4 GHz. It is designed for applications requiring a 50 ohm characteristic impedance, such as high-frequency communication systems or test equipment setups.

1211-40003

Sv Microwave

The SV Microwave 1211-40003 RF SMP Connector features a body diameter of 0.165", insertion loss of 0.154 dB, and dielectric withstanding voltage of 700VAC. Ideal for applications requiring a characteristic impedance of 50 ohm, such as high-frequency communication systems operating up to 26.5 GHz.

MS-156C3

Hirose Electric

The Hirose Electric MS-156C3 RF Connector is a threaded, 50 ohm receptacle with gold contact finish. With dimensions of 0.091" x 0.091" x 0.053", it operates up to 11 GHz and is ideal for surface mount applications on boards.

20279-001E-03

I-pex

The I-pex 20279-001E-03 is a RF MHF connector with a body length of 0.102", body diameter of 0.079", and max operating frequency of 9 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm, such as wireless communication systems.

SMP-MSLD-PCS-5T

Amphenol

Amphenol SMP-MSLD-PCS-5T RF connector features 50 ohm impedance, 1.3 VSWR, and 18 GHz operating frequency. Ideal for commercial applications, it has a liquid crystal polymer insulator, gold over nickel finish, and can withstand temperatures from -65 to 165 °C.

DIN7A-J-P-GF-RA-BH1

Samtec

Samtec DIN7A-J-P-GF-RA-BH1 is a 75 ohm RF connector with gold finish, right angle mounting, and female contact gender. Ideal for board and panel mounting applications requiring threaded coupling and PTFE insulator material. Body dimensions: 0.276" L x 0.163" D x 0.276" W x 0.76" D.

SF1212-6000

Sv Microwave

SF1212-6000 by Sv Microwave is an RF SMP connector with a body diameter of 0.164" and depth of 0.32". Featuring a VSWR of 1.35, it operates up to 20 GHz and has a characteristic impedance of 50 ohm. Ideal for board mounting applications requiring right angle male connectors terminated via soldering.

R180415007

Radiall S A

R180415007 RF Connector by Radiall S A features a threaded coupling type, 50 ohm impedance, and max operating frequency of 20 GHz. Ideal for panel mounting applications, this connector has a body length of 0.768", insertion loss of 0.22 dB, and can operate in temperatures ranging from -55 to 125°C.

PL455ACFLS-222

Cinch Connectivity Solutions

RF TRK CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; Mating Contact Finish: NICKEL; Termination Contact Finish: NICKEL; MIL Conformity: NO;