Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

531-40047-4

Manufacturer

Amphenol
Manufacturer's Part Number

531-40047-4
Description

RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Shell Material: ZINC; Body Depth: 1.3 inch;
Datasheet

Datasheet

Not In Stock

Popular Products

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

Details

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

BSS138BK,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;

Details

LM317T

Linear Technology

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

SMBJ18CA

Taiwan Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M85049/85-08W02

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;

Details

DS18B20

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

First Components International

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

IRLML6401TRPBF

Infineon Technologies

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

Details

LM317T/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;

Details

1N4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM7805CT

Silicon Group

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;

Details

531-40047-4 Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	TIN
Voltage Standing Wave Ratio:	1.92
IEC Conformity:	NO
Panel Mount:	NO
Shell Finish:	TIN
MIL Conformity:	NO
Termination Type:	SOLDER
Contact Gender:	FEMALE
Connector Type:	RF F CONNECTOR
Contact Material:	BERYLLIUM COPPER
Mounting Style:	RIGHT ANGLE
Other Names:	ARF1977 531400474
Filter Feature:	NO
Mounting Type:	BOARD
JESD-609 Code:	e3
Body Depth:	1.3 inch
Total No. of Contacts:	1
Body Width:	.48 inch
Coupling Type:	THREADED
Termination Contact Finish:	Tin (Sn)
Characteristic Impedance:	75 ohm
Insulator Material:	POLYMETHYLPENTENE
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	3 GHz
Shell Material:	ZINC
Body or Shell Style:	RECEPTACLE
DIN Conformance:	NO

Category Top Products

MS-180(20)

Hirose Electric

The Hirose Electric MS-180(20) RF Connector features a 0.3 dB insertion loss, 11 GHz max operating frequency, and 1.4 VSWR. Ideal for board mounting applications in electronics with a temperature range of -40 to 85°C. This female connector has a straight receptacle design with liquid crystal polymer insulator material.

EPA.00.250.NTN

Lemo Usa

EPA.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting applications. Featuring FEMALE contact gender, SOLDER termination, and VSWR of 1.25, it's ideal for high-frequency electronic connections.

BJ77FL

Bel Fuse

BJ77FL RF TRB CONNECTOR by Bel Fuse features a 0.487" body depth, NICKEL shell finish, and BRASS shell material. Ideal for commercial applications up to 0.5 GHz frequency, it offers FEMALE contact gender with SOLDER termination for reliable performance in PANEL mounting setups.

1065-1RQD

Winchester Interconnect

1065-1RQD by Winchester Interconnect is a male coax plug RF connector with brass shell, nickel over copper finish, and polyethylene insulator. It features crimp termination for cable mounting and locking option-1 for reliability in commercial applications.

282119-75

Amphenol

Amphenol 282119-75 RF connector features 1050VAC Dielectric Withstanding Voltage, 0.839" Body Depth, and -40 to 75°C Operating Temperature. Ideal for RF applications up to 2GHz, this crimp termination connector with a nickel finish is durable for commercial use in cable installations.

7325-1512-060

Radiall S A

Radiall S A 7325-1512-060 RF SSLB Connector features 0.187" body diameter, 0.3 dB insertion loss, and gold termination. Ideal for board mounting in applications requiring 50 ohm impedance up to 12.4 GHz frequency range. MIL conformity ensures reliable performance in extreme temperatures from -65°C to 165°C.

28504

Ddk

RF CONNECTOR; IEC Conformity: NO; Manufacturer Series: 27CP; MIL Conformity: NO; DIN Conformance: NO; Body or Shell Style: PLUG;

EHP.3T.675.CTL

Lemo Usa

EHP.3T.675.CTL by Lemo Usa is a threaded RF F connector with 75 ohm impedance and 1.2 GHz frequency, ideal for cable mounting applications. Featuring PTFE insulator material, solder termination, and male contact gender, it ensures low VSWR of 1.2 for high-quality signal transmission in various RF setups.

SMP-MSLD-PCS-16

Amphenol

RF SMP CONNECTOR;

SF1611-60021-2S

Sv Microwave

SF1611-60021-2S by Sv Microwave is a 50 ohm RF 2.4mm connector with 0.283 dB insertion loss and 1.28 VSWR, suitable for applications up to 50 GHz. Featuring threaded coupling, stainless steel shell, and male contact gender, it supports board and panel mounting in environments ranging from -65°C to 165°C.

SF2950-6062

Sv Microwave

SF2950-6062 by Sv Microwave is a panel mount RF connector with 50 ohm impedance and 0.03 dB insertion loss. It features PTFE insulation, withstands up to 1400VAC, and operates b/w -65 to 165 °C. Ideal for applications requiring high durability, such as in aerospace or telecommunications industries.

SF1521-60150

Sv Microwave

SF1521-60150 by Sv Microwave is a 2.92mm RF connector with threaded coupling, suitable for board mounting. With a max operating frequency of 40 GHz and VSWR of 1.25, it has a characteristic impedance of 50 ohm. This female jack connector is made of stainless steel, ideal for applications requiring high-frequency signal transmission.

119S101-40ML5

Rosenberger Hochfrequenztechnik & Kg

119S101-40ML5 RF connector by Rosenberger features 0.09 dB insertion loss, gold termination contact finish, and SNAP coupling type. With a max operating frequency of 10 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance in high-frequency environments. Suitable for use in boards with surface mount termination.

U.FL-R-SMT-1

Hirose Electric

U.FL-R-SMT-1 by Hirose Electric is a 50 ohm RF connector with 0.05 dB insertion loss and 200VAC dielectric voltage. Ideal for board mounting in commercial applications, it offers a max frequency of 6 GHz and features a right-angle mounting style.

TC-400-716FC

Times Microwave Systems

RF 7/16 DIN CONNECTOR;

R222.151.000

Radiall S A

R222.151.000 by Radiall S A is an RF SMP connector with a body diameter of 0.189 inch and a max operating frequency of 26.5 GHz. It is commonly used in commercial applications requiring a characteristic impedance of 50 ohm and a durability of 100 cycles.

MM4829-2702

Murata Manufacturing

Murata Manufacturing's MM4829-2702 RF CONNECTOR has a Voltage Standing Wave Ratio of 1.3, operating up to 6 GHz. With SNAP coupling and 50 ohm impedance, it is ideal for BOARD mounting in high-frequency applications.

5-1814823-1

TE Connectivity

TE Connectivity 5-1814823-1 RF Connector has 5000000000 ohm Insulation Resistance, 0.736" Body Depth, and THREADED Coupling Type. Ideal for commercial applications with 2 GHz Max Operating Frequency, it features POLYPROPYLENE Insulator Material and ZINC ALLOY Shell Material.

1075

Amphenol

RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

292-101P-52S

Amphenol

Amphenol 292-101P-52S is a threaded RF connector with gold finish, suitable for cables. Features include 50 ohm impedance, 40 GHz frequency, and low VSWR of 1.3. Ideal for high-frequency applications requiring reliable signal transmission.