Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

EM30MSD

Manufacturer

Hirose Electric
Manufacturer's Part Number

EM30MSD
Description

OTHER RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Silver (Ag); JESD-609 Code: e4; Contact Material: NOT SPECIFIED;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317TG

Texas Instruments

LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.

Details

LM7805CT

Silicon Group

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;

Details

C0805C104K5RACTU

KEMET Corporation

KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.

Details

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIA

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

Details

BSS138

Calogic

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;

Details

1N4148W-7-F

Diodes Incorporated

1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.

Details

ULN2803ADWRG4

Texas Instruments

ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

ULN2803A

YOUTAI SEMICONDUCTOR CO LTD

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

BSS138

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Details

M39029/56351

Souriau-sunbank Connection Technologies

Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.

Details

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Crimson Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

EM30MSD Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Termination Contact Finish:	Silver (Ag)
Connector Type:	OTHER RF CONNECTOR
Contact Material:	NOT SPECIFIED
JESD-609 Code:	e4

Category Top Products

82_MMBX-S50-0-13/111_NM

Huber+suhner Ag

82_MMBX-S50-0-13/111_NM RF connector by Huber+suhner Ag features a body length of 0.232", gold termination finish, and a max operating frequency of 12.4 GHz. It is designed for applications requiring a 50 ohm characteristic impedance, such as high-frequency communication systems or test equipment setups.

142-1002-0001

TE Connectivity

TE Connectivity 142-1002-0001 RF Connector features GOLD finish, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for applications requiring a right angle plug with slide-on coupling, suitable for up to 2 GHz frequency operations.

1252294-1

TE Connectivity

The TE Connectivity 1252294-1 RF Connector features a body diameter of 0.177", insulation resistance of 10^10 ohm, and dielectric voltage rating of 1400VAC. Ideal for applications requiring a reliable board and panel mount RF connection with a characteristic impedance of 50 ohm, suitable for frequencies up to 6 GHz in commercial settings.

3211-60035

Sv Microwave

3211-60035 by Sv Microwave is a panel mount RF connector with gold termination, snap coupling, and PTFE insulator. It has a characteristic impedance of 50 ohm and operates up to 40 GHz. Ideal for high-frequency applications requiring reliable male connectors with straight mounting style.

73415-5030

Molex

Molex 73415-5030 is an RF SMP connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 40 GHz and is suitable for use in commercial applications.

90003

Ddk

RF CONNECTOR; IEC Conformity: NO; Manufacturer Series: Y92; Body or Shell Style: PLUG; MIL Conformity: NO; DIN Conformance: NO;

DIN7A-PP-C-GF-ST-CA3

Samtec

Samtec DIN7A-PP-C-GF-ST-CA3 is a 1.0/2.3 DIN RF connector with 75 ohm impedance, gold over nickel termination, and snap coupling. Ideal for cable mounting applications, it has a body diameter of 0.325" and operates b/w -65°C to 125°C temperatures.

15440

Corning Gilbert

RF CONNECTOR; Contact Gender: FEMALE; Filter Feature: NO; Additional Features: LOW PROFILE; IEC Conformity: NO; Termination Type: SOLDER;

MM5829-2700RJ4

Murata Manufacturing

Murata Manufacturing's MM5829-2700RJ4 RF CONNECTOR features SNAP coupling, 1.3 VSWR, and 50 ohm impedance. Ideal for BOARD mounting in applications up to 12 GHz frequency range.

82_MMBX-S50-0-3/111_NE

Huber+suhner Ag

82_MMBX-S50-0-3/111_NE RF connector by Huber+suhner Ag features a characteristic impedance of 50 ohm, max operating frequency of 12.4 GHz, and VSWR of 1.5. Ideal for board mounting applications, this female jack connector with snap coupling is designed for high-frequency signal transmission in electronic systems.

MM4829-2702

Murata Manufacturing

Murata Manufacturing's MM4829-2702 RF CONNECTOR has a Voltage Standing Wave Ratio of 1.3, operating up to 6 GHz. With SNAP coupling and 50 ohm impedance, it is ideal for BOARD mounting in high-frequency applications.

HRMJ-U.FLP(40)

Hirose Electric

OTHER RF CONNECTOR; Reliability: COMMERCIAL; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; IEC Conformity: NO;

73415-5310

Molex

Molex 73415-5310 RF SMP Connector features 50 ohm impedance, gold finish, and 40 GHz frequency for high-performance applications. With solder termination and brass shell material, it is ideal for board mounting in various electronic devices. Operating temperature ranges from -65 to 165°C make it suitable for diverse environments.

1996705-4

TE Connectivity

TE Connectivity's 1996705-4 RF SMPM CONNECTOR features SNAP coupling, stainless steel shell, and right angle mounting. With dimensions of 1.12" x 0.85" x 0.392", it operates b/w -55 to 105°C. Ideal for board mounting applications requiring a male contact gender with screw termination.

1056722-1

TE Connectivity

TE Connectivity's 1056722-1 RF SMP Connector features a 50 ohm impedance, stainless steel shell, and -65 to 165 °C operating temperature range. Ideal for applications requiring high-frequency signal transmission in harsh environments.

11_QMA-50-2-1/133_NE

Huber+suhner Ag

11_QMA-50-2-1/133_NE by Huber+suhner Ag is a RF connector with characteristic impedance of 50 ohm, operating up to 18 GHz. It features SNAP coupling, PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE insulator, and BRASS shell material. Ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85 °C.

20279-001E-01

I-pex

I-pex 20279-001E-01 RF Connector features GOLD OVER NICKEL termination, SNAP coupling, and LIQUID CRYSTAL POLYMER insulator. Ideal for board mounting in applications requiring high-quality male connectors with COPPER ALLOY contacts.

CONUFL001-SMD-T

Linx Technologies

CONUFL001-SMD-T by Linx Technologies is a threaded RF connector with dimensions of 0.122" x 0.118" x 0.049". It operates b/w -40°C to 90°C, has a characteristic impedance of 50Ω, and supports frequencies up to 6 GHz. Ideal for surface mount applications in various electronic devices.

GRF1-J-P-08-E-RA-TH1-E

Samtec

The Samtec GRF1-J-P-08-E-RA-TH1-E RF connector has 8 ports, gold-plated contacts, and a dielectric voltage of 700VAC. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring high reliability and operating frequencies up to 6 GHz. The right-angle mounting style with solder termination makes it suitable for board mounting in various electronic devices.

U.FL-R-SMT-1(60)

Hirose Electric

U.FL-R-SMT-1(60) by Hirose Electric is a surface mount RF connector with a body length of 0.122 inch, body width of 0.118 inch, and body depth of 0.049 inch. It has a max operating frequency of 6 GHz and is commonly used in commercial applications requiring a characteristic impedance of 50 ohm.