Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

966

Manufacturer

Ntt
Manufacturer's Part Number

966
Description

RF CONNECTOR; Manufacturer Series: 966;
Datasheet

Datasheet

Not In Stock

Popular Products

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Details

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;

Details

LM358AN

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

ST3485EBDR

STMicroelectronics

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

LL4148

Onsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

GRM155R71H103KA88D

Murata Manufacturing

The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.

Details

1N4148

Taitron Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

EU2B-YS3203F

Idec

ROTARY SWITCH;

Details

BAV99

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Cinch Connectivity Solutions

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

2N7002

Rectron

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

Details

2N2222A

Zetex Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

966 Technical Details

TYPE	DESCRIPTION
Connector Type:	RF CONNECTOR
Manufacturer Series:	966

Category Top Products

ERN.00.250.CTL

Lemo Usa

ERN.00.250.CTL by Lemo Usa is a panel mount RF F CONNECTOR with 0.315" body diameter and 0.22" body depth. Featuring SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance, it's ideal for applications requiring a max operating frequency of 1.5 GHz.

1064538-1

TE Connectivity

TE Connectivity's 1064538-1 RF SSMT CONNECTOR features a body diameter of 0.1", insulation resistance of 1000000000 ohm, and EMI shielding. Ideal for commercial applications, this connector has a max operating frequency of 6 GHz and operates in temperatures ranging from -40 to 125 °C.

141-0003-0001

TE Connectivity

TE Connectivity 141-0003-0001 RF Connector has a body diameter of 0.156", gold termination finish, and threaded coupling. With 50 ohm impedance, it's ideal for applications requiring a max frequency of 2 GHz, rated at 3A signal current. Suitable for panel mounting with solder termination in female gender receptacle style.

R285.001.021

Radiall S A

R285.001.021 by Radiall S A is a SNAP RF CONNECTOR with 50 ohm impedance, suitable for applications up to 6 GHz frequency. It features RIGHT ANGLE mounting style and can operate in temperatures ranging from -40°C to 90°C, making it ideal for various RF connectivity needs.

1065-1RQD

Winchester Interconnect

1065-1RQD by Winchester Interconnect is a male coax plug RF connector with brass shell, nickel over copper finish, and polyethylene insulator. It features crimp termination for cable mounting and locking option-1 for reliability in commercial applications.

8-1393670-3

Tyco Electronics Amp

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; DIN Conformance: NO;

X.FL-R-SMT-1(80)

Hirose Electric

RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);

1909763-1

TE Connectivity

TE Connectivity 1909763-1 RF Connector has a body size of 0.118" x 0.118" x 0.049", with SNAP coupling, and liquid crystal polymer insulator. It operates b/w -40°C to 90°C, has characteristic impedance of 50 ohm, and supports up to 6 GHz frequency. Ideal for commercial applications requiring reliable board-mounted male coaxial connectors.

H.FL-R-SMT(01)

Hirose Electric

H.FL-R-SMT(01) by Hirose Electric is a surface mount RF connector with 50 ohm impedance, 1.3 VSWR, and gold termination finish. Ideal for board mounting in commercial applications up to 3 GHz frequency range. Features include liquid crystal polymer insulator, snap coupling, and -40 to 90°C operating temperature range.

MS-156C3(20)

Hirose Electric

RF CONNECTOR; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;

GRF1-J-P-06-E-ST-TH1-E

Samtec

The Samtec GRF1-J-P-06-E-ST-TH1-E RF Connector has 6 ports, 50 ohm impedance, and operates up to 6 GHz. With gold finish contacts and PTFE insulator, it is ideal for commercial applications requiring high reliability in temperatures ranging from -40°C to 90°C. The connector features a straight jack body style with solder termination for board mounting.

GRF1-J-P-08-E-ST-TH1-E

Samtec

The Samtec GRF1-J-P-08-E-ST-TH1-E RF Connector has 8 ports, 50 ohm impedance, and operates up to 6 GHz. It is ideal for commercial applications requiring a reliable connector with gold finish contacts and PTFE insulation material. The connector features a straight jack body style with solder termination suitable for board mounting.

SMP-MSLD-PCS-5T

Amphenol

Amphenol SMP-MSLD-PCS-5T RF connector features 50 ohm impedance, 1.3 VSWR, and 18 GHz operating frequency. Ideal for commercial applications, it has a liquid crystal polymer insulator, gold over nickel finish, and can withstand temperatures from -65 to 165 °C.

531-40193-HF

Amphenol

Amphenol 531-40193-HF RF F connector has a threaded coupling type, 75 ohm impedance, and operates up to 3 GHz. It is used in commercial applications for board mounting with a durability of 500 cycles.

SF1521-60124

Sv Microwave

SF1521-60124 by Sv Microwave is a threaded RF connector with 0.253 dB insertion loss, 50 ohm impedance, and 40 GHz max frequency. Ideal for board and panel mounting in applications requiring reliable signal transmission at temperatures ranging from -65 to 165°C.

700

Connecting Devices

RF CONNECTOR; Manufacturer Series: 7MM;

SF1611-60021-2S

Sv Microwave

SF1611-60021-2S by Sv Microwave is a 50 ohm RF 2.4mm connector with 0.283 dB insertion loss and 1.28 VSWR, suitable for applications up to 50 GHz. Featuring threaded coupling, stainless steel shell, and male contact gender, it supports board and panel mounting in environments ranging from -65°C to 165°C.

142-1002-0001

TE Connectivity

TE Connectivity 142-1002-0001 RF Connector features GOLD finish, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for applications requiring a right angle plug with slide-on coupling, suitable for up to 2 GHz frequency operations.

PSMP-MSLD-PCS

Amphenol

PSMP-MSLD-PCS by Amphenol is a RF SMP CONNECTOR with 50 ohm impedance, 0.095 dB insertion loss, and 10 GHz max operating frequency. It is used in board mounting applications for high-frequency signal transmission due to its SNAP coupling type and POLYETHERETHERKETONE insulator material.

RSP-122811-01

Samtec

Samtec's RSP-122811-01 RF MHF Connector features a 50 ohm characteristic impedance, SNAP coupling type, and 6 GHz max operating frequency. Ideal for board mounting in commercial applications with liquid crystal polymer insulator material and male contact gender.