Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
345	Request Pricing	-

3-1393670-9

Manufacturer

TE Connectivity
Manufacturer's Part Number

3-1393670-9
Description

RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Shell Finish: GOLD;
Datasheet

Datasheet

345 In Stock

Popular Products

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

OHN3020U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

M39029/58-360

Positronic Industries

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

LM317T

Bay Linear

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

Details

BAV99

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Microsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

2N2222A

Onsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

08055C104KAT4A

KYOCERA AVX

08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.

Details

1N4148WS

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

Details

BAV99

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

3-1393670-9 Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Voltage Standing Wave Ratio:	1.35
Mains Connector Rating:	115/230VAC
IEC Conformity:	NO
Panel Mount:	NO
Sub-Category:	Other RF Connectors
Empty Shell:	YES
Shell Finish:	GOLD
MIL Conformity:	NO
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	85
Body Length:	.287 inch
Contact Gender:	FEMALE
Connector Type:	RF CONNECTOR
Contact Material:	NOT SPECIFIED
Mounting Option-1:	LOCKING
Contact Resistance:	6 mohm
Insulation Resistance:	1000000000 ohm
Mounting Style:	RIGHT ANGLE
Mixed Contacts:	NO
No. of Ports:	1
Contact Style:	COAX
EMI Shielded:	NO
Filter Feature:	NO
Durability:	500 Cycles
Mounting Type:	PANEL
Body Depth:	.433 inch
Minimum Operating Temperature:	-40 Cel
Total No. of Contacts:	1
Body Width:	.291 inch
Coupling Type:	SCREW
Terminal Length:	.13 inch
Termination Contact Finish:	NOT APPLICABLE
No. of Connectors:	ONE
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Additional Features:	ROHS AND ELV COMPLIANT
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	10 GHz
Shell Material:	BRASS
Body or Shell Style:	JACK
Reliability:	COMMERCIAL
DIN Conformance:	NO

Category Top Products

R222.423.720

Radiall S A

R222.423.720 by Radiall S A is a RF connector with 0.25" body diameter, 5000000000 ohm insulation resistance, and 0.42 dB insertion loss. It is used in applications requiring a 50 ohm characteristic impedance, such as commercial-grade equipment operating up to 12 GHz frequency with surface mount termination for durability of 1000 cycles.

SMP-PF-P-HE-ST-EM3

Samtec

Samtec's SMP-PF-P-HE-ST-EM3 RF connector features a 50 ohm impedance, gold shell finish, and 40 GHz max operating frequency. Ideal for board mounting applications in high-temp environments (-65 to 165°C), with SNAP coupling type for easy connections.

90001

Lapp Group Pvt

RF CONNECTOR; Body or Shell Style: PLUG; Manufacturer Series: Y92; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO;

PRF24-J-C-EP-085-SS

Samtec

Samtec's PRF24-J-C-EP-085-SS RF Connector features a 0.33" body diameter and 0.985" depth, with threaded coupling. Ideal for cable mounting, it has solder clamp termination and female contact gender, suitable for various RF applications.

3285-6001-TD

Sv Microwave

3285-6001-TD by Sv Microwave is a RF SMPM connector with 50 ohm impedance, gold finish, and right angle mounting. Ideal for applications requiring high frequency up to 40 GHz such as aerospace and defense systems.

82_MMBX-S50-0-13/111_NE

Huber+suhner Ag

82_MMBX-S50-0-13/111_NE RF connector by Huber+suhner Ag features a SNAP coupling type, 50 ohm impedance, and operates up to 12.4 GHz. Ideal for board mounting applications, this female jack connector has a VSWR of 1.5 and can withstand temperatures from -55 to 155°C.

PSMP-MSSB-PCS

Amphenol

Amphenol's PSMP-MSSB-PCS RF SMP connector has a body diameter of 0.354" and insertion loss of 0.095 dB. With a max operating frequency of 10 GHz, it is ideal for high-frequency applications. The connector features a snap coupling type and surface mount termination, making it suitable for board mounting in various electronic devices.

131-0140-0001

TE Connectivity

TE Connectivity's 131-0140-0001 RF Connector features gold termination, threaded coupling, and PTFE insulator. With 50 ohm impedance and 2 GHz frequency, it is ideal for commercial applications requiring reliable signal transmission via cable or panel mounting.

AFI-J-P-HF-ST-MT1

Samtec

Samtec AFI-J-P-HF-ST-MT1 RF connector features 50 ohm impedance, SNAP coupling, and 6 GHz operating frequency. Ideal for board mounting applications requiring a female jack connector with POLYTETRAFLUOROETHYLENE insulator material.

BJ770-GL

Bel Fuse

BJ770-GL by Bel Fuse is a RF TRB connector with 0.562" body diameter and 0.487" body depth. It has a nickel shell finish, brass shell material, and solder termination type. Ideal for commercial applications at 0.5 GHz frequency, it features a female contact gender and straight mounting style with locking option.

925-138J-51P

Amphenol

RF SMPM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;

292-100J-52S

Amphenol

Amphenol 292-100J-52S is a threaded RF 2.92mm connector with gold shell finish, suitable for panel mounting. It has a max operating frequency of 40GHz, characteristic impedance of 50Ω, and operates b/w -65 to +165°C. Ideal for applications requiring high-frequency signal transmission in demanding environments.

1056729-1

TE Connectivity

1056729-1 by TE Connectivity is a RF CONNECTOR with 50 ohm impedance, made of STAINLESS STEEL. Operating temperature range: -65 to 165 °C. Used in applications requiring high-quality RF connections at extreme temperatures.

908-NM43200

Amphenol

Amphenol's 908-NM43200 RF connector features a dielectric voltage of 700VAC, gold contact finish, and a max operating frequency of 6 GHz. Ideal for commercial applications requiring a durable, 50 ohm coaxial plug with right-angle mounting and crimp termination on RD-178 cable types.

920-265J-51P

Amphenol

RF CONNECTOR; Manufacturer Series: 920-265J-51P;

131-8001

Amphenol

Amphenol 131-8001 RF Connector features 0.06 dB insertion loss, 1.49 VSWR, and 50 ohm impedance. Ideal for high-frequency applications up to 50 GHz with SNAP coupling and PTFE insulator in cable installations.

R222900310W

Radiall S A

R222900310W RF SMP connector by Radiall S A features a body length of 0.154", insertion loss of 0.42 dB, and max operating frequency of 12.4 GHz. Ideal for applications requiring a durable, high-frequency connection such as commercial RF systems with characteristic impedance of 50 ohm.

73412-0114

Molex

Molex 73412-0114 RF Connector has a Voltage Standing Wave Ratio of 1.3, SNAP coupling type, and male contact gender. Ideal for surface mount board applications in various electronic devices.

EZ-1200-78EIA-RA-2

Times Microwave Systems

RF CONNECTOR;

PSMP-MSLD-PCS

Amphenol

PSMP-MSLD-PCS by Amphenol is a RF SMP CONNECTOR with 50 ohm impedance, 0.095 dB insertion loss, and 10 GHz max operating frequency. It is used in board mounting applications for high-frequency signal transmission due to its SNAP coupling type and POLYETHERETHERKETONE insulator material.