Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ULN2003AS16-13

Manufacturer

Diodes Incorporated
Manufacturer's Part Number

ULN2003AS16-13
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Current: 1.35 mA;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BSS138

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;

Details

2N2222A

Semitronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

World Products

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

LM107H/883

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

OPA2277UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

NE555/D

General Electric Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

LL4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

DS18B20Z+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;

Details

BSS138

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

2N7002

Weitron Technology

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;

Details

LM358D-T

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

M39029/56-351

Glenair

CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;

Details

MBR0520LT1

Motorola

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Fct Electronic

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

ULN2003AS16-13 Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Output Characteristics:	OPEN-COLLECTOR
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
Maximum Supply Current:	1.35 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	105 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	3.9 mm
Turn-off Time:	10 us
Driver No. of Bits:	7
Maximum Supply Voltage:	13 V
Turn-on Time:	10 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	SOP16,.25
Output Current Flow Direction:	SINK
Length:	9.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm

Category Top Products

ULN-2803A

Sprague Electric

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

MAX4820EUP+T

Maxim Integrated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR;

BTS711L1XUMA1

Infineon Technologies

BTS711L1XUMA1 by Infineon is a MOS technology peripheral driver with 4 functions, 20 terminals, and built-in protections. It operates at supply voltages b/w 5V to 34V and has a nominal output peak current limit of 4.4A. This small outline package is ideal for applications requiring source and sink output current flow direction control.

L293DWPG4

Texas Instruments

L293DWPG4 by Texas Instruments is a peripheral driver with a max supply voltage of 7V. It has 2 functions and built-in protections for transient and thermal issues. This IC type is commonly used as a half bridge-based peripheral driver for various applications.

VNQ5E160KTR-E

STMicroelectronics

STMicroelectronics' VNQ5E160KTR-E is a full bridge peripheral driver with 4 bits. It has built-in protections for transient, over current, thermal, and under voltage. With a max supply voltage of 28V, it's ideal for applications requiring high power supplies and source output current flow direction.

DRV104PWP

Texas Instruments

DRV104PWP by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. This small outline, heat sink package is ideal for industrial applications requiring a max output current of 1.2A in a compact form factor.

ITS4141NXT

Infineon Technologies

ITS4141NXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 12-45 V. This MOS technology-based device has a turn-on time of 100 us and output current flow direction is sink.

VN5050J-E

STMicroelectronics

STMicroelectronics' VN5050J-E is a peripheral driver with 12 terminals and built-in protections. It operates on power supplies ranging from 8V to 36V, making it suitable for various applications requiring buffer or inverter-based interface ICs. The compact rectangular package with a low profile and gull wing terminal form makes it ideal for space-constrained designs.

VNQ860SPTR-E

STMicroelectronics

STMicroelectronics' VNQ860SPTR-E is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and has a nominal output peak current limit of 0.7A. This small outline driver is ideal for applications requiring source flow direction in automotive systems.

MIC2544A-1YM

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

IRS44273LTRPBF

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

ITS428L2

Infineon Technologies

ITS428L2 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85°C with a supply voltage range of 4.75V to 43V. This small outline IC is ideal for buffer or inverter-based applications requiring a peak output current limit of 1.8A.

L293DN

Unitrode

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V; Output Current Flow Direction: SOURCE AND SINK;

VND5T050AKTR-E

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;

PTPS1H000AQDGNRQ1

Texas Instruments

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Screening Level: AEC-Q100;

MAX4820EUP+

Analog Devices

MAX4820EUP+ by Analog Devices is an 8-bit peripheral driver with a supply voltage range of 2.3V to 5.5V, operating temperature from -40°C to 85°C, and turn-on/off time of 1µs. It features open-drain output characteristics and is ideal for industrial applications requiring buffer or inverter-based peripheral drivers in a compact small outline package.

MAX845ESA-T

Maxim Integrated

MAX845ESA-T by Maxim Integrated is an 8-terminal peripheral driver with a supply voltage range of 4.5V to 5.5V, suitable for industrial applications. It features a peak current limit of 1A, Gull Wing terminal form, and operates in temperatures from -40°C to 85°C. Ideal for buffer or inverter-based systems requiring source and sink output current flow control.

L293DD013TR

STMicroelectronics

L293DD013TR by STMicroelectronics is a 20-terminal peripheral driver with a max supply voltage of 36V. It features built-in thermal protection and offers a nominal output peak current limit of 1.2A. Ideal for applications requiring source and sink output current flow direction, such as buffer or inverter-based interface ICs.

ITS4200SMENHUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;

FDC6324L

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;