Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
971	$0.836	$811.756

IRS2103PBF

Manufacturer

International Rectifier
Manufacturer's Part Number

IRS2103PBF
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

971 In Stock

Popular Products

SMBJ18CA

Yageo

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

2N7002

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Souriau-sunbank Connection Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;

Details

FDC5614P

Onsemi

FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

USB3320C-EZK-TR

Standard Microsystems

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Toshiba

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Micropac Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

CRG0805F10K

TE Connectivity

TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.

Details

DS18B20Z/T&R

Maxim Integrated

DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.

Details

EU2B-YS3303C

Idec

ROTARY SWITCH;

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

Secos

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

IRS2103PBF Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	10 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	15 V
Maximum Seated Height:	5.33 mm
Sub-Category:	MOSFET Drivers
Surface Mount:	NO
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	CMOS
JESD-30 Code:	R-PDIP-T8
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Built-in Protections:	TRANSIENT; UNDER VOLTAGE
Maximum Operating Temperature:	125 Cel
Package Code:	DIP
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	7.62 mm
Turn-off Time:	.22 us
Other Names:	SP001545488
Maximum Supply Voltage:	20 V
Turn-on Time:	.82 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	DIP8,.3
Output Current Flow Direction:	SOURCE AND SINK
Length:	9.88 mm
Terminal Pitch:	2.54 mm
Temperature Grade:	AUTOMOTIVE
Power Supplies (V):	15

Category Top Products

TBD62083AFNG(Z.EL)

Toshiba

The TBD62083AFNG(Z.EL) by Toshiba is a peripheral driver with 8 functions. It has a maximum supply voltage of 25V and a minimum supply voltage of 2.5V. The package style is small outline, low profile, shrink pitch. It can handle a maximum operating temperature of 85°C and a minimum operating temperature of -40°C. Its width is 4.4mm and its length is 6.5mm. The TBD62083AFNG(Z.EL) is an industrial-grade BCDMOS technology device with a nominal supply voltage of 5V. Its interface IC type is buffer or inverter based peripheral driver, and it has a sink output current flow direction.

AUIPS6041GTR

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

VN340SP13TR

STMicroelectronics

STMicroelectronics' VN340SP13TR is a 4-function peripheral driver with built-in protections for over current, thermal, and under voltage. It operates at a nominal voltage of 24V and has a max supply voltage of 36V. With a turn-on time of 100us and turn-off time of 50us, it is ideal for applications requiring fast response times in automotive electronics.

VNB14NV04-E

STMicroelectronics

VNB14NV04-E by STMicroelectronics is a peripheral driver with built-in protections against transient, over current, over voltage, and thermal issues. It has a max seated height of 4.826 mm and a width of 9.15 mm. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.

VN5025AJTR-E

STMicroelectronics

VN5025AJTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This IC type interface driver has a turn-on time of 30us and is commonly used in buffer or inverter based applications.

DRV8844PWPR

Texas Instruments

DRV8844PWPR by Texas Instruments is a peripheral driver with a max supply voltage of 60V, output current up to 2.5A, and built-in protections for overcurrent and thermal issues. It is ideal for industrial applications requiring precise motor control in harsh environments.

VN7140ASTR

STMicroelectronics

STMicroelectronics' VN7140ASTR is a peripheral driver with 8 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120 us. Ideal for applications requiring buffer or inverter based interface ICs in compact designs.

NCP51810AMNTWG

Onsemi

HALF BRIDGE BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;

ITS428L2XT

Infineon Technologies

ITS428L2XT by Infineon Technologies is a peripheral driver with a max supply voltage of 43V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring buffer or inverter based interface ICs with a nominal output peak current limit of 1.8A.

BTS50302EKAXUMA1

Infineon Technologies

BTS50302EKAXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 5V to 28V and has a turn-on/off time of 230us. Ideal for automotive applications due to AEC-Q100 screening level and compact rectangular package design.

DRV103H/2K5G3

Texas Instruments

DRV103H/2K5G3 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It operates in industrial temperature grades from -40 to 85°C, making it suitable for various applications requiring a nominal output peak current limit of 3.5A. The package style is small outline with gull wing terminals, ideal for surface mount designs.

SZNUD3124LT1G

Onsemi

SZNUD3124LT1G by Onsemi is a Peripheral Driver with 2 functions, AEC-Q101 screening level, and built-in transient protection. It has 6 terminals, operates b/w -40 to 125 °C, and supports a supply voltage of 28 V. Ideal for applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs.

BSP742T

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;

NCP361MUTBG

Onsemi

NCP361MUTBG by Onsemi is a peripheral driver with 6 terminals and built-in protections against transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.2V to 20V. Ideal for industrial applications requiring a buffer or inverter based peripheral driver in a small outline package style.

VN800PS-E

STMicroelectronics

VN800PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 8V to 36V and has a max output current of 0.7A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.

IRS21867STRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ULN2068B

STMicroelectronics

STMicroelectronics' ULN2068B is a 4-function peripheral driver with built-in transient protection. It operates at 5V, has a max output current of 1.5A, and features bipolar technology. Ideal for applications requiring sink output current flow direction and fast turn-on/off times in a compact IN-LINE package style.

VN751STR

STMicroelectronics

VN751STR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive-grade temperatures, has a nominal output peak current limit of 2.7A, and is ideal for buffer or inverter-based applications requiring a source flow direction.

VNQ5050K-E

STMicroelectronics

STMicroelectronics VNQ5050K-E is a 4-function peripheral driver with max supply voltage of 36V. It offers built-in protections for transient, over current, and over voltage. Ideal for applications requiring a compact design and high output current up to 2A.

A2982SLWTR-T

Allegro MicroSystems

A2982SLWTR-T by Allegro MicroSystems is a peripheral driver with 8 functions. It has a small outline package style and can handle a max output current of 0.35A. This IC type is commonly used as a buffer or inverter based peripheral driver.