Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MIC5891YWM

Manufacturer

Micrel
Manufacturer's Part Number

MIC5891YWM
Description

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

DS18B20

Maxim Integrated

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

LM7805CT

Silicon Group

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

LM317TG

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;

Details

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

2N2222A

New England Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

2N7002

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;

Details

BAV99

Plessey Semiconductors Discrete Components Div

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

BAV99

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

LL4148

Promax-johnton

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Comset Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Rfe International

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;

Details

RN41N-I/RM

Microchip Technology

Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.

Details

MIC5891YWM Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5 V
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	2.64 mm
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Terminal Finish:	Matte Tin (Sn)
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BIMOS
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	SIPO BASED PERIPHERAL DRIVER
Width:	7.52 mm
Nominal Supply Voltage-1:	50 V
Turn-off Time:	10 us
Moisture Sensitivity Level (MSL):	2
Other Names:	576-2403 MIC5891YWM-ND
Driver No. of Bits:	8
Maximum Supply Voltage:	12 V
Turn-on Time:	2 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOP16,.4
Output Current Flow Direction:	SOURCE
Length:	10.34 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	12/16

Category Top Products

DRV104PWPRG4

Texas Instruments

DRV104PWPRG4 by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. With a nominal output peak current limit of 2A, it is ideal for industrial applications requiring precise control of peripherals. This small outline package with gull wing terminals operates in temperatures ranging from -40 to 85°C.

LM3525MX-H/NOPB

Texas Instruments

LM3525MX-H/NOPB by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections for transient, over current, thermal, and under voltage. It has an output current limit of 1A and is ideal for automotive applications due to its temperature grade.

VN5E006ASPTR-E

STMicroelectronics

STMicroelectronics' VN5E006ASPTR-E is a peripheral driver with 10 terminals, operating voltage range of 4.5-28V, and built-in protections against various faults. It comes in a small outline package suitable for surface mount applications. Ideal for buffering or inverting signals with a peak output current limit of 90A.

BTS723GWXT

Infineon Technologies

BTS723GWXT by Infineon Technologies is a MOS technology peripheral driver with 14 terminals and built-in protections against transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 7V to 58V and has a nominal output peak current limit of 9A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.

BSP452

Infineon Technologies

BSP452 by Infineon is a MOS technology-based peripheral driver with 4 terminals and built-in protections for over/under voltage. It operates at supply voltages ranging from 5V to 34V, making it suitable for automotive applications requiring a nominal output peak current limit of 0.7A. The small outline package style with gull wing terminal form enables surface mount installation in compact spaces.

ISO1H812GAUMA1

Infineon Technologies

Infineon's ISO1H812GAUMA1 is a 36-terminal peripheral driver with 8-bit driver configuration and 0.625 A output current. It operates on power supplies of 3.3/5,15/30 V and has a max output peak current limit of 2.2 A. Ideal for applications requiring sink flow direction such as half bridge based interface ICs in small outline packages.

VN330SP-E

STMicroelectronics

STMicroelectronics VN330SP-E is a 4-function peripheral driver with built-in protections. It operates at supply voltages b/w 10-36V, suitable for automotive applications. With a max output current of 0.5A and turn-on/off times of 60/40us, it offers reliable performance in compact dimensions (9.4x7.5x3.75mm).

BTS723GW

Infineon Technologies

BTS723GW by Infineon Technologies is a peripheral driver with a max supply voltage of 58V and built-in protections for transient, over current, over voltage, thermal, and under voltage. It is commonly used in automotive applications due to its small outline package style and MOS technology.

BSP752RXUMA2

Infineon Technologies

BSP752RXUMA2 by Infineon is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections against transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 6-52 V. Ideal for industrial applications requiring a small outline package style.

TPS22965TDSGRQ1

Texas Instruments

TPS22965TDSGRQ1 by Texas Instruments is an 8-terminal peripheral driver with a supply voltage range of 2.5V to 5.5V and operating temperature from -40°C to 105°C. It features built-in transient protection, no-lead terminal form, and source/sink current flow direction. Ideal for industrial applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.

BTN8962TA

Infineon Technologies

BTN8962TA by Infineon Technologies is a 7-terminal MOS peripheral driver with built-in protections for transient, over/under voltage & current. It operates at 8-18V, AEC-Q100 screened, ideal for automotive applications requiring true output polarity and Schmitt trigger input characteristics.

PTPS1H200AQDGNRQ1

Texas Instruments

PTPS1H200AQDGNRQ1 by Texas Instruments is a Peripheral Driver with 8 terminals, operating voltage range of 4-40V, and built-in protections against transient, over current, and thermal issues. It is designed for automotive applications with a small outline package style and AEC-Q100 screening level.

EL7156CSZ-T7

Renesas Electronics

EL7156CSZ-T7 by Renesas Electronics is a full bridge peripheral driver with 3.5A output current limit, suitable for industrial applications. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-16.5V. This small outline package has dual terminals and matte tin finish, making it ideal for surface mount designs.

ULN2004ADRG3

Texas Instruments

ULN2004ADRG3 by Texas Instruments is a 7-function peripheral driver with built-in transient protection. It operates b/w -20 to 70°C, with a max supply voltage of 8V and current of 1.35mA. Ideal for applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.

BTS4880RAUMA1

Infineon Technologies

BTS4880RAUMA1 by Infineon Technologies is a Peripheral Driver with 8 functions, operating at supply voltages b/w 11V to 45V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline driver has a turn-on time of 100us and turn-off time of 150us, making it suitable for various industrial applications requiring sink output current flow direction.

VN7003ALHTR

STMicroelectronics

STMicroelectronics' VN7003ALHTR is a peripheral driver with 8 terminals, AEC-Q100 screening level, and built-in protections for transient, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120us. Ideal for applications requiring buffer or inverter based peripheral drivers in automotive electronics.

ULN-2064B

Sprague Electric

Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

FPF2701MPX

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;

L6201PSTR

STMicroelectronics

L6201PSTR by STMicroelectronics is a full bridge peripheral driver with 1A output current, 48V max supply voltage, and built-in transient protection. It is ideal for applications requiring source and sink output current flow direction in a compact small outline package.

VN750PTTR-E

STMicroelectronics

VN750PTTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.