Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ULN2003AD16-U

Manufacturer

Diodes Incorporated
Manufacturer's Part Number

ULN2003AD16-U
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
Datasheet

Datasheet

Not In Stock

Popular Products

LM317T

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;

Details

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

BSS138

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

Details

LM358AN

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

PAP-06V-S

J S T Mfg

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

Details

LM555CM

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

ROHM

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;

Details

BAV99

Won-top Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H/883

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

2N2222A

Gec Plessey Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

1N4148

Vishay Intertechnology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2003ADR

Texas Instruments

ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.

Details

BAT54C-7-F

Diodes Incorporated

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Pro-an Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2003AD16-U Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Output Characteristics:	OPEN-COLLECTOR
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
Maximum Supply Current:	1.35 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	105 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	3.9 mm
Turn-off Time:	10 us
Other Names:	ULN2003AD16-UDI
Driver No. of Bits:	7
Maximum Supply Voltage:	13 V
Turn-on Time:	10 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	SOP16,.25
Output Current Flow Direction:	SINK
Length:	9.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm

Category Top Products

BTS452RXT

Infineon Technologies

BTS452RXT by Infineon Technologies is a peripheral driver with a max supply voltage of 52V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring buffer or inverter based interface ICs with source and sink output current flow direction.

PTPS22919QDCKRQ1

Texas Instruments

PTPS22919QDCKRQ1 by Texas Instruments is a peripheral driver with 6 terminals, offering built-in protections for transient, over current, and thermal issues. It operates b/w -40 to 125 °C with a supply voltage range of 1.6V to 5.5V, making it ideal for automotive applications requiring a max output current of 1.5A.

ULN2003V12T16-13

Diodes Incorporated

ULN2003V12T16-13 by Diodes Inc. is a peripheral driver with 1 function, operating temperature range of -40 to 125°C, and a small outline package. It is commonly used in automotive applications for buffer or inverter based interface ICs requiring inverted output polarity and sink current flow direction.

ITS4060SSJNXUMA1

Infineon Technologies

ITS4060SSJNXUMA1 by Infineon is a Peripheral Driver with 8 terminals, operating at -40 to 125 °C. It offers built-in protections for transient, over current, and over voltage situations. Ideal for automotive applications due to its CMOS technology and source output current flow direction.

LMG1020YFFT

Texas Instruments

LMG1020YFFT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 7A. It features built-in thermal and under voltage protections, making it suitable for automotive applications requiring fast turn-on/off times and source/sink current flow direction control.

UCC27201ADDAR

Texas Instruments

UCC27201ADDAR by Texas Instruments is a half bridge peripheral driver with 2 channels, capable of handling up to 3A output current. It operates in automotive-grade temperatures (-40 to 140°C) and has built-in under voltage protection. This small outline package (4.9mm x 3.9mm) is ideal for applications requiring true output polarity control and fast turn-on/off times (0.007us).

BSP452E6327T

Infineon Technologies

BSP452E6327T by Infineon Technologies is a Peripheral Driver with 4 terminals, offering built-in protections against various faults. It operates at supply voltages ranging from 5V to 34V and has a nominal output peak current limit of 1.7A. This small outline package driver is ideal for applications requiring buffer or inverter-based interface ICs.

ULQ2003ADR2G

Onsemi

ULQ2003ADR2G by Onsemi is a 16-terminal peripheral driver with built-in transient protection. It operates b/w -40 to 85°C, has an inverted output polarity, and a nominal voltage of 50V. Ideal for applications requiring sink current flow direction, such as buffer or inverter-based interface ICs.

NUD3160LT1G

Onsemi

NUD3160LT1G by Onsemi is a peripheral driver with a max supply voltage of 60V and output current of 0.15A. It features built-in transient protections, operates in automotive temperature grades, and is ideal for buffer or inverter-based applications.

BTS3800SLHTSA1

Infineon Technologies

BTS3800SLHTSA1 by Infineon Technologies is a peripheral driver with 5 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 18V and has a turn-on/off time of 5us. This small outline device is ideal for applications requiring source/sink output current flow control.

MDC3105DMT1G

Onsemi

MDC3105DMT1G by Onsemi is a peripheral driver with 6 terminals, operating at -40 to 85°C. It has a max output current of 0.25A and built-in transient protection, suitable for industrial applications requiring a 5V supply voltage and sink output current flow direction.

ITS42008SBDAUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; JESD-609 Code: e3;

FPF2124

Onsemi

FPF2124 by Onsemi is a MOS technology-based peripheral driver with 5 terminals and built-in protections. It operates b/w -40 to 85 °C, with a supply voltage range of 1.8-5.5 V. Ideal for industrial applications requiring a compact, low-profile design and peak current limit of 0.8 A.

BTT60201ERAXUMA1

Infineon Technologies

BTT60201ERAXUMA1 by Infineon is a 14-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 5V to 48V and has a max seated height of 1.15mm. Ideal for applications requiring a small outline, low profile package style with gull wing terminals.

VNN7NV04PTR-E

STMicroelectronics

STMicroelectronics VNN7NV04PTR-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It has a small outline package style with gull wing terminal form and matte tin finish. Ideal for applications requiring a buffer or inverter-based interface IC with nominal output peak current limit of 9A.

UDN2987LW

Allegro MicroSystems

Allegro MicroSystems' UDN2987LW is a peripheral driver with 8 functions, operating voltage range of 7-35V, and built-in protections. Ideal for applications requiring source output current flow direction, this small outline driver has a turn-on time of 0.6us and nominal output peak current limit of 0.5A.

VNB14N0413TR

STMicroelectronics

VNB14N0413TR by STMicroelectronics is a peripheral driver with a max output peak current limit of 14A. It has built-in protections for transient, over current, and thermal issues. This MOS technology-based device is commonly used as a buffer or inverter based peripheral driver.

ULN2068B

STMicroelectronics

STMicroelectronics' ULN2068B is a 4-function peripheral driver with built-in transient protection. It operates at 5V, has a max output current of 1.5A, and features bipolar technology. Ideal for applications requiring sink output current flow direction and fast turn-on/off times in a compact IN-LINE package style.

BTS6133DAUMA2

Infineon Technologies

BTS6133DAUMA2 by Infineon is a peripheral driver with 4 terminals, offering built-in protections against various faults. It operates at supply voltages ranging from 5.5V to 38V and has a nominal output peak current limit of 10A. This small outline package driver is ideal for applications requiring sink output current flow direction and fast turn-on/off times of 500 us.

ULN2065B

STMicroelectronics

ULN2065B by STMicroelectronics is a 16-terminal peripheral driver with 4 functions. It features built-in transient protection and operates in an industrial temperature range from -20°C to 85°C. This rectangular package with through-hole terminals is ideal for applications requiring true output polarity and fast turn-on/off times of 1 us and 1.5 us, respectively.