Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

TPIC6595DWR

Manufacturer

Texas Instruments
Manufacturer's Part Number

TPIC6595DWR
Description

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

FDLL4148

Onsemi

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

Details

LL4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

1N4148WT

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

American Power Devices

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

STM32H753IIK6

STMicroelectronics

STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.

Details

2N2222A

Infineon Technologies

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

STM32F405RGT6TR

STMicroelectronics

STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.

Details

SS14

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Iskra Semic Capacitors Industry

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;

Details

BAV99

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Db Lectro

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

Glenair

CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;

Details

2N2222A

Motorola

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;

Details

TPIC6595DWR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Output Characteristics:	OPEN-DRAIN
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	2.65 mm
Maximum Output Current:	.5 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Maximum Supply Current:	5 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	125 Cel
No. of Channels:	8
Package Code:	SOP
Interface IC Type:	SIPO BASED PERIPHERAL DRIVER
Width:	7.5 mm
Turn-off Time:	.15 us
Moisture Sensitivity Level (MSL):	1
Output Polarity:	TRUE
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	8
Maximum Supply Voltage:	5.5 V
Turn-on Time:	.625 us
Nominal Output Peak Current Limit:	2 A
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	8
Qualification:	Not Qualified
Package Equivalence Code:	SOP20,.4
Output Current Flow Direction:	SINK
Length:	12.8 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	AUTOMOTIVE
Power Supplies (V):	5

Category Top Products

VN920SO

STMicroelectronics

STMicroelectronics' VN920SO is a MOS technology-based peripheral driver with 16 terminals. It offers built-in protections for transient, over current, and over voltage scenarios. With a max output current of 10A and nominal output peak current limit of 45A, it's ideal for applications requiring sink flow direction like buffer or inverter based interface ICs.

VNS1NV04DP-E

STMicroelectronics

VNS1NV04DP-E by STMicroelectronics is an 8-terminal peripheral driver with a small outline package and gull wing terminals. It operates as a sink type buffer or inverter, handling a max output current of 30s at 240°C peak reflow temperature. Ideal for applications requiring surface mountable drivers in plastic/epoxy packages.

IR25600SPBF

Infineon Technologies

IR25600SPBF by Infineon is a CMOS half bridge peripheral driver with 8 terminals, operating at -40 to 125 °C. It has a supply voltage of 15V and is designed for automotive applications due to its moisture sensitivity level of 2.

ULN-2801A

Vishay Sprague

Vishay Sprague's ULN-2801A is an 8-function peripheral driver with built-in transient protection. It operates b/w -20°C to 85°C, featuring open-collector output characteristics and a turn-on/off time of 1 us. Ideal for applications requiring sink current flow direction, this rectangular package style IC is commonly used in buffer or inverter-based interfaces.

VNS3NV04DP-E

STMicroelectronics

VNS3NV04DP-E by STMicroelectronics is a peripheral driver with built-in thermal and overvoltage protections. It has 2 functions, 8 terminals, and a peak output current limit of 5A. Ideal for applications requiring sink output flow direction, it features a turn-on time of 1.35us and turn-off time of 10us in a small outline package style.

IRS2106STRPBF

Infineon Technologies

IRS2106STRPBF by Infineon is a peripheral driver with 8 terminals, operating voltage of 10-20V. It offers built-in transient and under voltage protections, ideal for automotive applications. With a turn-on time of 0.3us and turn-off time of 0.28us, it provides source and sink output current flow direction.

FPF2701MPX

Onsemi

FPF2701MPX by Onsemi is a peripheral driver with a max supply voltage of 36V and built-in protections for over current, thermal, and under voltage. It has 8 terminals in a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 0.4A.

BTS3110NHUMA1

Infineon Technologies

BTS3110NHUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, and thermal issues. It features a small outline, low profile package style with 4 terminals in a gull wing form. This interface IC type has a nominal output peak current limit of 7.5A and is suitable for applications requiring sink output current flow direction.

ULQ2003ADR2G

Onsemi

ULQ2003ADR2G by Onsemi is a 16-terminal peripheral driver with built-in transient protection. It operates b/w -40 to 85°C, has an inverted output polarity, and a nominal voltage of 50V. Ideal for applications requiring sink current flow direction, such as buffer or inverter-based interface ICs.

BTN8962TAAUMA1

Infineon Technologies

BTN8962TAAUMA1 by Infineon is a MOS technology peripheral driver with 7 terminals. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a half bridge based interface IC with true output polarity and source/sink current flow direction.

TPS22917DBVR

Texas Instruments

TPS22917DBVR by Texas Instruments is a small outline, low profile peripheral driver with 6 terminals. It offers transient protection and operates b/w -40 to 125°C, making it suitable for automotive applications. The package measures 2.9mm x 1.6mm x 1.45mm and has a gull wing terminal form with nickel/palladium/gold finish.

BSP752RXUMA2

Infineon Technologies

BSP752RXUMA2 by Infineon is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections against transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 6-52 V. Ideal for industrial applications requiring a small outline package style.

LMG1020YFFT

Texas Instruments

LMG1020YFFT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 7A. It features built-in thermal and under voltage protections, making it suitable for automotive applications requiring fast turn-on/off times and source/sink current flow direction control.

ISP752TXT

Infineon Technologies

ISP752TXT by Infineon Technologies is a Peripheral Driver with 8 terminals, offering built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 6-52 V. Ideal for applications requiring a small outline package style and nominal output peak current limit of 6.5 A.

UDN2987LWTR

Allegro MicroSystems

Allegro MicroSystems' UDN2987LWTR is a Peripheral Driver with 8 functions, 35V max supply voltage, and 0.5A output peak current limit. Ideal for applications requiring source flow direction, such as motor control systems. Features built-in protections against transient events, overcurrent, and thermal issues.

TPS1H200AQDGNRQ1

Texas Instruments

TPS1H200AQDGNRQ1 by Texas Instruments is a high side driver with 40V max supply voltage, 4V min supply voltage, and 125°C max operating temp. Ideal for automotive applications due to AEC-Q100 screening level and built-in protections against transient, over current, and thermal issues.

L293DWP

Texas Instruments

L293DWP by Texas Instruments is a peripheral driver with 2 functions, operating at 5V nominal voltage. It offers built-in transient and thermal protections, supporting a max supply voltage of 36V. Ideal for applications requiring source and sink output current flow direction in commercial temperature grade environments.

VND5025AK-E

STMicroelectronics

VND5025AK-E by STMicroelectronics is a Peripheral Driver with 2 functions, operating at 4.5-36 V. It offers built-in protections for transient, thermal, and under voltage issues. This CMOS technology driver has a small outline package style and is ideal for buffer or inverter based peripheral driver applications.

BTS711L1XT

Infineon Technologies

BTS711L1XT by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This MOS technology-based device is suitable for applications requiring buffer or inverter based peripheral drivers.

VNQ7040AYTR

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;