Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DRV8846RGET

Manufacturer

Texas Instruments
Manufacturer's Part Number

DRV8846RGET
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: VQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

M39029/56-351

Glenair

CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;

Details

DS18B20Z

Maxim Integrated

DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

1N4148

Digitron Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Telcom Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

261

Micronetics

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

LL4148

Rectron

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

SS14

Pro-an Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20U

Maxim Integrated

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

2N2222A

Continental Device India

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

SMBJ18CA

Littelfuse

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Invensys Sensor Systems

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

DRV8846RGET Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1 mm
Maximum Output Current:	2 A
Surface Mount:	YES
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	24
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, VERY THIN PROFILE
JESD-30 Code:	S-PQCC-N24
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Built-in Protections:	TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Maximum Operating Temperature:	85 Cel
Package Code:	VQCCN
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	4 mm
Moisture Sensitivity Level (MSL):	3
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Output Current Flow Direction:	SOURCE AND SINK
Length:	4 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

DS2482S-800+T&R

Analog Devices

DS2482S-800+T&R by Analog Devices is a peripheral driver with 8 functions, operating at 2.9-5.5V, suitable for industrial applications. It features a small outline package style, dual terminal position, and source output current flow direction. With a temperature range of -40 to 85°C, it is ideal for various electronic systems requiring precise signal buffering or inversion.

BTS462TATMA1

Infineon Technologies

BTS462TATMA1 by Infineon is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max supply voltage of 34V and nominal output peak current limit of 4.4A. Ideal for applications requiring sink output current flow direction in a small outline package style.

FPF2700MPX

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;

TPS2H000AQPWPRQ1

Texas Instruments

TPS2H000AQPWPRQ1 by Texas Instruments is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It offers built-in protections for transient, over current, thermal, and under voltage issues. Ideal for automotive applications due to its AEC-Q100 screening level and small outline package style.

TBD62083AFNG,EL

Toshiba

Toshiba's TBD62083AFNG,EL is an 8-function peripheral driver with built-in transient protection. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style. Ideal for applications requiring sink output current flow direction and true output polarity.

SZNUD3160DMT1G

Onsemi

SZNUD3160DMT1G by Onsemi is a 6-terminal peripheral driver with AEC-Q101 screening. It features transient protection, operates b/w -40 to 125 °C, and has a small outline package style. Ideal for automotive applications requiring sink output current flow direction.

TPS25221DBVR

Texas Instruments

TPS25221DBVR by Texas Instruments is a small outline, low profile peripheral driver with thermal protection. It operates in automotive temperature grades from -40 to 125°C. With turn-on time of 3000us and turn-off time of 700us, it's ideal for buffer or inverter based applications.

ULN2803A

Texas Instruments

ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

IRS44262SPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ULN2004AS16-13

Diodes Incorporated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-609 Code: e3;

MC10XS3412CHFKR2

NXP Semiconductors

MC10XS3412CHFKR2 by NXP Semiconductors is a 16-terminal peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a supply voltage range of 6-20V and has an automotive temperature grade. This square-shaped chip carrier is ideal for buffer or inverter-based applications requiring fast turn-on/off times and sink output current flow direction.

FPF2702MPX

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;

ADP196ACBZ-01-R7

Analog Devices

ADP196ACBZ-01-R7 by Analog Devices is a peripheral driver with a max supply voltage of 5.5V and built-in protections against over current and thermal issues. It is commonly used as a buffer or inverter based peripheral driver for industrial applications.

E-L6201PSTR

STMicroelectronics

STMicroelectronics E-L6201PSTR is a full-bridge peripheral driver with 20 terminals. It operates b/w 12V to 48V, offering built-in thermal protection. Utilized in applications requiring source and sink current flow control, it features BCDMOS technology in a compact rectangular package.

TPS272C45DRHFR

Texas Instruments

TPS272C45DRHFR by Texas Instruments is a peripheral driver with 2 functions, operating voltage range of 6-36V, and built-in protections. It is used in applications requiring open-drain output polarity, with a turn-on time of 65us and turn-off time of 80us.

VNH5019TR-E

STMicroelectronics

VNH5019TR-E by STMicroelectronics is a full bridge peripheral driver with 30 terminals. It offers built-in protections for transient, over voltage, thermal, and under voltage. With a max supply voltage of 24V and nominal output peak current limit of 50A, it is ideal for applications requiring source and sink output current flow direction.

ULN2003A

Vishay Intertechnology

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Driver No. of Bits: 7;

BSP772TXT

Infineon Technologies

BSP772TXT by Infineon is a Peripheral Driver with built-in protections for transient, over current, over voltage, and under voltage. It operates at a max supply voltage of 34V and has a nominal output peak current limit of 17A. Ideal for industrial applications requiring a small outline package style with sink output current flow direction.

BTS133BKSA1

Infineon Technologies

BTS133BKSA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for over current, over voltage, and thermal issues. It has a nominal output peak current limit of 28A and a turn-on time of 100µs. This rectangular package style device is ideal for applications requiring sink output current flow direction in automotive systems.

MC10XS3412CHFKR2

Freescale Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: BUTT; No. of Terminals: 16; Package Code: HBCC; Package Shape: SQUARE;