Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SI9986DY-T1-E3

Manufacturer

Vishay Intertechnology
Manufacturer's Part Number

SI9986DY-T1-E3
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Package Code: SOP; Width: 3.9 mm; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
Datasheet

Datasheet

Not In Stock

Popular Products

LM7805CT

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

Details

2N2222A

Microchip Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

Details

1N4148WT

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Secos

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

Details

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS3203F

Idec

ROTARY SWITCH;

Details

1N4148WS

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Diotec Semiconductor Ag

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

2N2222A

Ksl Microdevices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

LM358N

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LL4148

Weitron Technology

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CDSOT23-SM712

Bourns

Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.

Details

SI9986DY-T1-E3 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3.8 V
Nominal Supply Voltage:	4.5 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Supply Voltage:	13.2 V
Maximum Seated Height:	1.75 mm
Terminal Finish:	MATTE TIN
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Output Current Flow Direction:	SOURCE AND SINK
Length:	4.9 mm
Maximum Operating Temperature:	85 Cel
Peak Reflow Temperature (C):	260
Package Code:	SOP
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	3.9 mm
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Moisture Sensitivity Level (MSL):	1

Category Top Products

BTS70102EPAXUMA1

Infineon Technologies

BTS70102EPAXUMA1 by Infineon is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 18V and has a turn-on time of 110 us. Ideal for automotive applications due to AEC-Q100 screening level.

ISO1H811GAUMA1

Infineon Technologies

ISO1H811GAUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a max supply voltage of 5.5V and has a max output current of 0.625A. This interface IC type is ideal for applications requiring buffer or inverter based peripheral drivers in compact designs.

IRS21844MTRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HQCCN; Package Shape: SQUARE;

MC33879APEK-R2

Freescale Semiconductor

MC33879APEK-R2 by Freescale is a peripheral driver with 32 terminals, operating at -40 to 125 °C. It offers built-in protections for transient, over current, and over voltage situations. Ideal for automotive applications due to its MOS technology and true output polarity.

IRS2304SPBF

Infineon Technologies

IRS2304SPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is a CMOS technology-based interface IC type, suitable for automotive applications. This small outline, shrink pitch package has built-in protections against transient and under voltage conditions.

ULN2003AINSR

Texas Instruments

ULN2003AINSR by Texas Instruments is a 7-bit peripheral driver with open-collector output, max supply voltage of 3V, and built-in transient protection. It has a turn-on/off time of 10us and nominal output peak current limit of 0.5A. Ideal for applications requiring sink current flow direction in compact designs with surface mount capability.

NCV8402ASTT3G

Onsemi

NCV8402ASTT3G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, and thermal conditions. It has a max output peak current limit of 4.8A and a turn-on time of 25us. This IC is commonly used as a buffer or inverter based peripheral driver in various applications.

ITS4100SSJNXUMA1

Infineon Technologies

ITS4100SSJNXUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, operating voltage range of 5-34V. Ideal for automotive applications, it offers built-in protections against transient, over current and over voltage. Package style is small outline with Gull Wing terminal form.

FDG6324L

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

UDN2981A-T

Allegro MicroSystems

Allegro MicroSystems' UDN2981A-T is an 8-bit peripheral driver with a max output current of 0.35A and nominal voltage of 35V. It features built-in transient protection, operates b/w -20°C to 85°C, and has a turn-on time of 2µs. Ideal for applications requiring source output current flow direction in various electronic systems.

NX5P3363UKZ

NXP Semiconductors

NX5P3363UKZ by NXP Semiconductors is a 16-terminal peripheral driver with a supply voltage range of 4V to 5.5V. It offers built-in thermal and under-voltage protections, suitable for industrial applications with an operating temperature range from -40°C to 85°C. The IC type is buffer or inverter-based, making it ideal for various electronic systems requiring a peak output current limit of 0.4A.

L6201PS

STMicroelectronics

L6201PS by STMicroelectronics is a full bridge peripheral driver with 5A output current limit, suitable for applications requiring source and sink flow direction. It operates at supply voltages ranging from 12V to 48V, featuring built-in thermal protection. The small outline package with gull wing terminals makes it ideal for compact designs in various electronic systems.

BSP752RXT

Infineon Technologies

BSP752RXT by Infineon Technologies is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections against various faults. It operates at supply voltages ranging from 6V to 52V and has a nominal output peak current limit of 1.7A. Ideal for applications requiring buffer or inverter based peripheral drivers in compact designs.

BTS3205GXUMA1

Infineon Technologies

BTS3205GXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over voltage, and thermal issues. It operates at a nominal voltage of 12V with a turn-on time of 38µs and turn-off time of 45µs. This small outline package is ideal for applications requiring sink output current flow direction.

MC10XS3412CHFKR2

Freescale Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: BUTT; No. of Terminals: 16; Package Code: HBCC; Package Shape: SQUARE;

FSFR2100XSL

Fairchild Semiconductor

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; No. of Functions: 1; Terminal Finish: MATTE TIN;

AD5749ACPZ

Analog Devices

AD5749ACPZ by Analog Devices is a peripheral driver with 32 terminals, operating voltage range of 2.7-55V, and max supply current of 6.2mA. It has a square package shape and is suitable for industrial applications requiring buffer or inverter-based interface ICs with source current flow direction.

SZNUD3112DMT1G

Onsemi

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;

MAX14913AKN+

Analog Devices

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;

VND7020AJTR

STMicroelectronics

VND7020AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 4-28 V. Ideal for automotive applications due to its compact size and sink output current flow direction.