Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ISO1H811GAUMA1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

ISO1H811GAUMA1
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Dc Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

E8WSDC12-32.768KTR

Abracon

Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

Details

BAV99

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Sgs-ates Componenti Electronici S P A

Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

2N2222A

Dionics-usa

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Diodes Incorporated

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99-7-F

Diodes Incorporated

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358DT

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

2N7002

Itt Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;

Details

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

ISO1H811GAUMA1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	15 V
Nominal Supply Voltage:	3.3 V
Maximum Seated Height:	3.5 mm
Maximum Output Current:	.625 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Terminal Finish:	TIN
No. of Terminals:	36
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
JESD-30 Code:	R-PDSO-G36
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Maximum Operating Temperature:	125 Cel
Package Code:	HSSOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	11 mm
Turn-off Time:	170 us
Maximum Supply Voltage-1:	30 V
Moisture Sensitivity Level (MSL):	3
Driver No. of Bits:	8
Maximum Supply Voltage:	5.5 V
Turn-on Time:	120 us
Nominal Output Peak Current Limit:	.7 A
JESD-609 Code:	e3
Minimum Operating Temperature:	-25 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SSOP36,.56
Output Current Flow Direction:	SINK
Length:	15.9 mm
Terminal Pitch:	.65 mm
Temperature Grade:	OTHER
Power Supplies (V):	3.3/5,15/30

Category Top Products

BTS3035EJXUMA1

Infineon Technologies

BTS3035EJXUMA1 by Infineon is a peripheral driver with 8 terminals, AEC-Q100 screening level, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 3V to 5.5V and has a nominal output peak current limit of 5A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.

VND5T050AKTR-E

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;

VN751STR

STMicroelectronics

VN751STR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive-grade temperatures, has a nominal output peak current limit of 2.7A, and is ideal for buffer or inverter-based applications requiring a source flow direction.

BTS7960P

Infineon Technologies

BTS7960P by Infineon Technologies is a MOS technology peripheral driver with 7 terminals. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage. With a max supply voltage of 27.5V and nominal output peak current limit of 62A, it is ideal for applications requiring a half bridge based peripheral driver with source and sink output current flow direction.

VND600SPTR-E

STMicroelectronics

VND600SPTR-E by STMicroelectronics is a 2-function peripheral driver with built-in protections. It operates b/w -40 to 150 °C, with a supply voltage range of 5.5-36 V. Ideal for automotive applications due to its small outline and source current flow direction.

MIC94093YC6-TR

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

AUIPS7081RTRL

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Turn-off Time: 50 us; Built-in Protections: TRANSIENT; OVER CURRENT; THERMAL;

VNP5N07-E

STMicroelectronics

VNP5N07-E by STMicroelectronics is a 3-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It has a turn-on time of 0.25 us and nominal output peak current limit of 5 A. This BUFFER OR INVERTER BASED IC is used in applications requiring sink output current flow direction.

VNB14N0413TR

STMicroelectronics

VNB14N0413TR by STMicroelectronics is a peripheral driver with a max output peak current limit of 14A. It has built-in protections for transient, over current, and thermal issues. This MOS technology-based device is commonly used as a buffer or inverter based peripheral driver.

VN920SPTR-E

STMicroelectronics

STMicroelectronics' VN920SPTR-E is a peripheral driver with 36V max supply voltage, 30A max output current, and built-in protections. Ideal for applications requiring transient, over current, over voltage protection. Package style: small outline, heat sink/slug; interface IC type: buffer or inverter based peripheral driver.

NCP361SNT1G

Onsemi

NCP361SNT1G by Onsemi is a 5-terminal peripheral driver with built-in protections against transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.2V to 20V. Ideal for industrial applications requiring a compact design and reliable performance.

IRS2186STRPBF

Infineon Technologies

IRS2186STRPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is used in automotive applications and offers built-in protections against transients and under voltage. Its turn-on and turn-off time is 0.25us, making it suitable for fast switching operations.

BTS441RG

Infineon Technologies

BTS441RG by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4.75V to 43V and has a nominal output peak current limit of 21A. This rectangular package style device is ideal for automotive applications requiring a sink output current flow direction.

LM3526MX-L/NOPB

National Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ULN2003D

Integrated Power Semiconductors

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

FDC6330L_NL

Fairchild Semiconductor

FDC6330L_NL by Fairchild Semiconductor is a CMOS peripheral driver with 6 terminals, 2.3A output current, and built-in transient protection. It operates in temperatures ranging from -55 to 150°C and is ideal for military-grade applications requiring a low-profile, small outline package with source current flow direction.

BTS711L1

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Technology: MOS; Surface Mount: YES;

TPS4H160BQPWPRQ1

Texas Instruments

TPS4H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It features built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver capability.

VNN1NV04PTR-E

STMicroelectronics

VNN1NV04PTR-E by STMicroelectronics is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 5V with a turn-on time of 1us and output peak current limit of 1.7A. Ideal for applications requiring buffer or inverter based interface ICs in compact spaces due to its small outline package style.

ULN2803AD

Taejin Technology

ULN2803AD by Taejin Tech is an 8-bit buffer/inverter peripheral driver with a max supply voltage of 3V and peak current limit of 0.5A. It offers built-in transient protection, operates b/w -40 to 85°C, and has a turn-on/off time of 1us. Ideal for applications requiring sink output current flow direction in surface-mount designs.